Investigation on Reliability Testing Methods for Production of Titanium Tubes
摘 要
质量较高的钛管在生产过程中,通常使用超声波探伤、水压试验、涡流检测和气密试验等方法检验其可靠性,但因每种方法均有其优点和不足,所以存在漏检的可能性.因此在实际作业过程中,需根据产品的实际应用工况采取有针对性的安全性检验方法,配合使用渗透着色等无损检测方法,提高产品缺陷的检出率.
Abstract
Ultrasonic testing, hydrostatic testing, eddy current testing and tightness test methods are often used during producing titanium tubes with high quality.Because each method has its advantages and disadvantages, so there is the undetected possibility.Therefore in the process of actual operation, the safety testing methods need to be taken according to the product working condition of practical application, the nondestructive testing methods should be matched including penetrant and coloration detection to improve the detection rate for defects in products.
中图分类号 TG146.2+3
所属栏目 试验技术与方法
基金项目
收稿日期 2014/8/25
修改稿日期
网络出版日期
作者单位点击查看
备注何春艳(1980-),女,工程师.
引用该论文: HE Chun-yan,ZHANG Chang-juan,FENG Hui,ZHU Kang-ping,ZHU Jian-wen. Investigation on Reliability Testing Methods for Production of Titanium Tubes[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2015, 51(3): 181~183
何春艳,张嫦娟,冯辉,朱康平,祝建雯. 钛管生产用可靠性检验方法初探[J]. 理化检验-物理分册, 2015, 51(3): 181~183
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】马红征,黄张红,曲恒磊,等.轧制TA10钛合金管开裂原因分析[J].理化检验-物理分册,2014,50(3):223-226.
【2】文宁,朱康平,王军锋.钛管材超声波探伤方法初探[C]//陕西省第十一届无损检测年会论文集,汉中:陕西省机械工程学会无损检测分会,2008.
【3】全国锅炉压力容器无损检测人员资格考核委员会.超声波探伤[M].北京:锅炉压力容器安全杂志社,1995.
【4】GB/T 12969.1-2007钛及钛合金管材超声波检验方法[S].
【5】GB/T 241-2007金属管液压试验方法[S].
【2】文宁,朱康平,王军锋.钛管材超声波探伤方法初探[C]//陕西省第十一届无损检测年会论文集,汉中:陕西省机械工程学会无损检测分会,2008.
【3】全国锅炉压力容器无损检测人员资格考核委员会.超声波探伤[M].北京:锅炉压力容器安全杂志社,1995.
【4】GB/T 12969.1-2007钛及钛合金管材超声波检验方法[S].
【5】GB/T 241-2007金属管液压试验方法[S].
相关信息