Difference Analysis on Qualification and Certification of Nondestructive Testing Personnel for Nuclear Equipment between China and America
摘 要
对核设备无损检验从业人员进行资格评定是减少核设备制造过程中人为失误造成质量事故的重要方法之一,相关标准是执行无损检验活动的基本依据.梳理了现行中美两国核电设备无损检验人员资格评定的法规标准,对比分析了两者对文件类型和适用范围、人员资格分级、培训和评定程序、评定机构和发证机关、从业限制和文件保存等的规定.建议我国核能行业标准建设进一步参考国外类似标准,优化现有标准,为将来核能行业无损检验人员的培养提供更有利的参考.
Abstract
Qualification and certification of nondestructive testing (NDT) personnel for nuclear equipment is one of the methods to reduce the accident made by man during manufacturing.Codes and standards are the basic reference of NDT.The code and standard were compared and analyzed from document type, application scope, personnel classification, training and certification, qualification organization, restriction, document preservation, etc.Aiming at optimizing the recent codes and standards, the foreign similar standards should be further referenced.
中图分类号 TG115.28
所属栏目 标准化
基金项目
收稿日期 2014/5/22
修改稿日期
网络出版日期
作者单位点击查看
备注杨海波(1984-),男,工程师,工学学士.
引用该论文: YANG Hai-bo. Difference Analysis on Qualification and Certification of Nondestructive Testing Personnel for Nuclear Equipment between China and America[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2015, 51(3): 184~187
杨海波. 中美核设备无损检验人员资格评定差异分析[J]. 理化检验-物理分册, 2015, 51(3): 184~187
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】刘贵明,马丽丽.无损检测技术[M].北京:国防工业出版社,2009:1-3.
【2】肖峰.美国无损检测学会的雇主认证程序和中心认证程序[J].无损检测,2000,22(10):458-460,463.
【3】民用核安全设备无损检验人员资格鉴定委员会.关于原核工业、电力行业和机械行业等三行业颁发的核工业无损检测/核承压设备无损检验人员资格证书更换为民用核安全设备无损检验人员资格证书的通知[EB/OL].[2008-11-14].http://www.cqcn.org/Article.aspx?ArticleId=80.
【2】肖峰.美国无损检测学会的雇主认证程序和中心认证程序[J].无损检测,2000,22(10):458-460,463.
【3】民用核安全设备无损检验人员资格鉴定委员会.关于原核工业、电力行业和机械行业等三行业颁发的核工业无损检测/核承压设备无损检验人员资格证书更换为民用核安全设备无损检验人员资格证书的通知[EB/OL].[2008-11-14].http://www.cqcn.org/Article.aspx?ArticleId=80.
相关信息