Processing Quality Comparison of Holes in Titanium Alloy Made by Helical Milling and Traditional Drilling
摘 要
对钛合金进行了螺旋铣孔与传统钻孔试验,研究了两种孔的加工质量及影响因素.结果表明:钛合金螺旋铣孔的质量相对较高,表面粗糙度相对较小;对于螺旋铣孔工艺,轴向每转进给量是影响孔表面粗糙度的主要因素,切向每齿进给量是影响孔圆度的主要因素,螺旋铣孔参数对孔径的影响不大;对于传统钻孔工艺,轴向每转进给量是影响孔表面粗糙度、圆度和孔径的主要因素.
Abstract
The experiments were carried out on titanium alloy through helical milling and traditional drilling processes,and the holes quality and the influence factors were investigated.Results show that,comparing with the traditional drilling,the helical milling showed better hole quality and the smaller surface roughness.For helical milling process,the axis feed per tooth was the main factor on surface roughness of the holes,the transverse feed per tooth was the main factor on the holes roundness,but the holes diameter was not significantly affected by the helical milling parameters.For traditional drilling process,the axis feed per tooth was the main factor affecting surface roughness,roundness and diameter of the holes.
中图分类号 TG501.1
所属栏目 试验研究
基金项目 国家高技术研究发展计划项目(2013AA040104);国家自然科学基金资助项目(51405336);中国博士后科学基金资助项目(2014M550142)
收稿日期 2014/10/29
修改稿日期 2015/2/24
网络出版日期
作者单位点击查看
备注吉春辉(1985-),男,山东临沂人,博士后.
引用该论文: JI Chun-hui,TIAN Li-cheng,QIN Xu-da,LIU Zheng-wang,LIU Jie. Processing Quality Comparison of Holes in Titanium Alloy Made by Helical Milling and Traditional Drilling[J]. Materials for mechancial engineering, 2015, 39(5): 1~3
吉春辉,田利成,秦旭达,刘振旺,刘婕. 钛合金螺旋铣孔与传统钻孔的加工质量对比[J]. 机械工程材料, 2015, 39(5): 1~3
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】赵宇光,周伟,彭新,等.钛合金表面低氧压熔Al-Cr涂层及其高温抗氧化性[J].吉林大学学报,2004,34(4):521-526.
【2】冯素玲,徐九华,刘鹏,等.PCD刀具高速铣削TA15钛合金的切削性能[J].机械工程材料,2011,35(3):44-48.
【3】赵洪兵,朱林.钛合金深孔钻削刀具的实验研究[J].中国机械工程,2006,17(6):591-595.
【4】蔺海,杨冠军,毛小南,等.轧制方式和热处理工艺对TC4-DT钛合金板材各向力学性能的影响[J].机械工程材料,2012,36(2):52-54.
【5】段友社,周晓芹,侯军生.大飞机复合材料机翼研制技术现状[J].航空制造技术,2012(18):34-37.
【6】DORNFELD D A,KIM J S,DECHOW H,et al.Drilling burr formation in titanium alloy,Ti-6Al-4V[J].CIRP Annals-Manufacturing Technology,1999,48(1):73-76.
【7】PRABUKARTHI A,KRISHNARAJ V,SSNTHOSH M,et al.Optimisation and tool life study in drilling of titanium (Ti-6Al-4V) alloy[J].International Journal of Machining and Machinability of Materials,2013,13(2/3):138-157.
【8】CANTERO J L,TARDIO M M,CANTELI J A,et al.Dry drilling of alloy Ti-6Al-4V[J].International Journal of Machine Tools & Manufacture,2005,45:1246-1255.
【9】LE COZ G,MARINESCU M,DEVILLEZ A,et al.Measuring temperature of rotating cutting tools:application to MQL drilling and dry milling of aerospace alloys[J].Applied Thermal Engineering,2012,36:434-441.
【10】NI W.Orbital drilling of aerospace materials[R].[S.l.]:SAE Technical Papers,2007.
【11】WANG H Y,QIN X D,REN C Z,et al.Prediction of cutting forces in helical milling process[J].International Journal of Advanced Manufacturing Technology,2012,58(9/12):849-859.
【12】孙晓太.CFRP/钛合金螺旋铣孔专用刀具优化与试验研究[D].天津:天津大学,2012.
【2】冯素玲,徐九华,刘鹏,等.PCD刀具高速铣削TA15钛合金的切削性能[J].机械工程材料,2011,35(3):44-48.
【3】赵洪兵,朱林.钛合金深孔钻削刀具的实验研究[J].中国机械工程,2006,17(6):591-595.
【4】蔺海,杨冠军,毛小南,等.轧制方式和热处理工艺对TC4-DT钛合金板材各向力学性能的影响[J].机械工程材料,2012,36(2):52-54.
【5】段友社,周晓芹,侯军生.大飞机复合材料机翼研制技术现状[J].航空制造技术,2012(18):34-37.
【6】DORNFELD D A,KIM J S,DECHOW H,et al.Drilling burr formation in titanium alloy,Ti-6Al-4V[J].CIRP Annals-Manufacturing Technology,1999,48(1):73-76.
【7】PRABUKARTHI A,KRISHNARAJ V,SSNTHOSH M,et al.Optimisation and tool life study in drilling of titanium (Ti-6Al-4V) alloy[J].International Journal of Machining and Machinability of Materials,2013,13(2/3):138-157.
【8】CANTERO J L,TARDIO M M,CANTELI J A,et al.Dry drilling of alloy Ti-6Al-4V[J].International Journal of Machine Tools & Manufacture,2005,45:1246-1255.
【9】LE COZ G,MARINESCU M,DEVILLEZ A,et al.Measuring temperature of rotating cutting tools:application to MQL drilling and dry milling of aerospace alloys[J].Applied Thermal Engineering,2012,36:434-441.
【10】NI W.Orbital drilling of aerospace materials[R].[S.l.]:SAE Technical Papers,2007.
【11】WANG H Y,QIN X D,REN C Z,et al.Prediction of cutting forces in helical milling process[J].International Journal of Advanced Manufacturing Technology,2012,58(9/12):849-859.
【12】孙晓太.CFRP/钛合金螺旋铣孔专用刀具优化与试验研究[D].天津:天津大学,2012.
相关信息