Analysis on Sinter Mineralogical Using Metallographic Microscope
摘 要
为填补莱芜钢铁集团有限公司在炼铁高炉用烧结矿矿相分析方面的空白,并减少投资,对现有大型光学显微镜进行了技术改造,包括改用强亮度的高压氙灯,去掉滤光片,改用最大数值光阑,在偏光起偏器上加色彩补偿,购买专用镜头等.并结合彩色图像分析仪,利用光片在偏振光下所呈现的色彩或灰度不同的原理,建立了定量测试系统,编制了测试软件.试验结果达到了烧结矿矿相识别准确率高、速度快的效果,实现了替代矿相显微镜对烧结矿进行矿相定量分析的工作,并用于了烧结工艺生产的指导.
Abstract
To supplement blank of sinter mineralogical analysis for ironmaking blast furnace in Laiwu iron and steel group corporation and to reduce investment, the transformation was made for the existing large metallographic microscope, for example instead of the strong high-pressure xenon lamp brightness, removing the filter, using the diaphragm with the maximum number, adding the color compensation in polarizer, purchasing the special lenses and so on.Based on the principle of the different color or grayscale under polarized light, and combined the color image analyzer, a quantitative measurement system was established, and the measurement software was prepared.The recognition accuracy for sinter mineralogical was high and the test was fast, the mineral phase microscopy could be replaced by the quantitative analysis method for sinter phase to guide the sintering process.
中图分类号 TF521
所属栏目 试验技术与方法
基金项目
收稿日期 2014/11/30
修改稿日期
网络出版日期
作者单位点击查看
备注王航民(1972-),男,工程师.
引用该论文: WANG Hang-min. Analysis on Sinter Mineralogical Using Metallographic Microscope[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2015, 51(5): 332~336
王航民. 利用光学显微镜进行烧结矿矿相的分析[J]. 理化检验-物理分册, 2015, 51(5): 332~336
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】BUNDGAARD Hans.金相试样湿式磨料切割技术[J].理化检验-物理分册,2011,47(5):289-294.
【2】洛阳建筑材料工业专科学校.硅酸盐岩相学[M].北京:中国建筑工业出版社,1986:306-308.
【3】邱贵宝.基于彩色数字图像技术的矿物反射率计算模型的研究[J].冶金分析,2008,28(5):5-9.
【4】郭兴敏,朱利.高碱度烧结矿的矿物组成与矿相结构特征[J].钢铁,2007,42(11):18-19.
【5】任允芙.钢铁冶金岩相矿相学[M].北京:冶金工业出版社,1982:202.
【2】洛阳建筑材料工业专科学校.硅酸盐岩相学[M].北京:中国建筑工业出版社,1986:306-308.
【3】邱贵宝.基于彩色数字图像技术的矿物反射率计算模型的研究[J].冶金分析,2008,28(5):5-9.
【4】郭兴敏,朱利.高碱度烧结矿的矿物组成与矿相结构特征[J].钢铁,2007,42(11):18-19.
【5】任允芙.钢铁冶金岩相矿相学[M].北京:冶金工业出版社,1982:202.
相关信息