Application of an Anticorrosive and Static Conductive Laminate to the Floor Exposed to Stripper
摘 要
某维修机库喷漆车间所用退漆剂腐蚀性强,且对地面防腐蚀系统有导静电要求,故首先进行耐蚀试验,然后根据试验结果并结合公司历史数据和工程实践,推荐改进型阿斯普里特LC系统用于此项目.此后,客户又对上述系统提出消防要求,遂特别制作样品并模拟实际工况进行耐火试验,试验合格后用于二期工程.前后两期的工程应用表明,该改进系统是合适的.
Abstract
A coating workshop of a hangar faces big problems due to its very corrosive stripper,and static conductive surface is also a request.Corrosion test was conducted,and the company recommended Asplit LC laminate based on the test result and its historic data and project reference.After successful application in the first phase,the client also asked for the fireproof property of the system.Samples were made for the fireproof tests in conditions similar to the actual application.With qualified result,the system was used for the second phase.The successful application for two phases proved that this modified system is suitable.
中图分类号 TG174 DOI 10.11973/fsyfh-201507015
所属栏目 应用技术
基金项目
收稿日期 2015/1/28
修改稿日期
网络出版日期
作者单位点击查看
备注李根成(1965-),工程师,硕士,从事非金属材料的防腐蚀应用研究.
引用该论文: LI Gen-cheng. Application of an Anticorrosive and Static Conductive Laminate to the Floor Exposed to Stripper[J]. Corrosion & Protection, 2015, 36(7): 669
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
相关信息
标题 | 相关频次 | |
不同玻璃纤维单向增强树脂基复合材料的疲劳行为 | 1 | |
复合材料层压板的超声相控阵检测 | 1 | |
热塑/热固性聚苯醚的共混改性及其复合材料层压板的性能 | 1 | |
碳纤维层压板复合材料拉伸性能的有限元分析 | 1 |