Fluorescent Magnetic Particle Inspection for Nuclear Power Plant Turbine Rotor Blades
摘 要
介绍了使用线圈法和磁轭法对汽轮机转子叶片进行荧光磁粉检测的步骤及技术要求.通过试验确定了合适的检测工艺,并对汽轮机转子叶片进行了实际检测,同时进行了与渗透检测的对比试验,试验表明:荧光磁粉检测法能有效检出叶片端部、齿根及叶身表面的较小缺陷,具有较高的检出灵敏度,可靠性较高,适用于叶片类不规则形状产品的在役检验.
Abstract
This paper introduces the steps and technical requirements for the fluorescent magnetic particle testing of steam turbine rotor blade by using the method of coil and magnetic yoke.Suitable technological parameters for the test were identified through experiment and the actual testing of steam turbine rotor blade was performed,and at the same time a contrast experiment was made with penetration detection.The test showed that the fluorescent magnetic particle detection method could effectively detect smaller defects in the blade end,root and surface of the leaf body with high sensitivity and high reliability for in-service inspection of blade and other irregular shape of products.
中图分类号 TG115.28 DOI 10.11973/wsjc201508020
所属栏目 实验经验
基金项目
收稿日期 2015/1/14
修改稿日期
网络出版日期
作者单位点击查看
备注付千发(1982-),男,硕士研究生,主要从事核设备无损检测工作.
引用该论文: FU Qian-fa,LI Peng,LI Qiu-da,GE Liang,ZHANG Ming. Fluorescent Magnetic Particle Inspection for Nuclear Power Plant Turbine Rotor Blades[J]. Nondestructive Testing, 2015, 37(8): 80~82
付千发,李朋,李邱达,葛亮,张明. 核电厂汽轮机转子叶片的荧光磁粉检测[J]. 无损检测, 2015, 37(8): 80~82
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】罗建斌,谭士森,袁立平.大型汽轮机叶片事故原因分析[J].电力安全技术,2002(8):11-12.
【2】牟立颇.压气机转子叶片的磁粉检测[J].无损检测,2014,36(8):57-59.
【3】宋地哲.磁粉检测[M].北京:中国劳动社会保障出版社,2007.
【2】牟立颇.压气机转子叶片的磁粉检测[J].无损检测,2014,36(8):57-59.
【3】宋地哲.磁粉检测[M].北京:中国劳动社会保障出版社,2007.
相关信息