搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
缓蚀水溶性聚苯胺的性能及聚合工艺的研究
          
PROPERTIES AND SYNTHESIS OF INHIBITIVE WATER-SOLUBLE POLYANILINE

摘    要
采用苯胺及其衍生物进行共聚制备缓蚀水溶性聚苯胺,用腐蚀浸泡失重法研究了苯胺衍生物比例、单体浓度、氧化剂浓度、酸度、反应温度及时间对其缓蚀性能的影响.研究结果表明,苯胺衍生物比例、单体浓度、氧化剂浓度、酸度、反应温度对缓蚀水溶性聚苯胺的缓蚀性能都具有较大的影响,而反应时间对聚合产物的缓蚀性能没有显著影响.
标    签 聚苯胺   聚合   水溶性   缓蚀性能   Polyaniline   Synthesis   Water-soluble   Inhibitive performance  
 
Abstract
Polyaniline was synthesized by aniline and derivative aniline.The weight lost of immersion corrosion was used to investigate the effects of the ratio of aniline to its derivative,concentration of aniline,oxidant,acidity,reaction temperature and time on the inhition of synthesized products.The ratio of aniline to its derivative,concentration of aniline,oxidant,acidity,reaction temperature showed remarkable effects on inhibition,but the reaction time had little effect.

中图分类号 TG174.41

 
  中国光学期刊网论文下载说明


所属栏目 试验研究

基金项目

收稿日期 2005/11/30

修改稿日期

网络出版日期

作者单位点击查看

引用该论文: LIN Wei-li,DU Mei-li,DENG Yu-qiang,LIU Deng-feng,WU Jian. PROPERTIES AND SYNTHESIS OF INHIBITIVE WATER-SOLUBLE POLYANILINE[J]. Corrosion & Protection, 2006, 27(9): 443~446


被引情况:


【1】程雨,吴广峰,夏刚,张会轩, "水溶性聚苯胺对铸铁的缓蚀作用",腐蚀与防护 33, 1072-1075(2012)



论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】DeBerry W.Modification of the electrochemical and corrosion behavior of stainless steels with an electroactive coating[J].Electrochemical Society,1985,132:102.
 
【2】王光国.国外聚苯胺防腐涂料工业研发概况[J].全面腐蚀控制,2002,16(2):23-24.
 
【3】张金勇,李季,王献红,等.聚苯胺在防腐领域的应用[J].功能高分子学报,1999,12(3):350-356.
 
【4】苏慈生.导电聚苯胺在防腐涂料中的应用[J].现代涂料与涂装,2001,(1):1-4.
 
【5】Talo A,Passiniemi P,Forsen O,et et al.Polyaniline epoxy coating with good anticorrosion properties[J].Synthetic Metal,1997,85:1333-1334.
 
【6】Wessling B.Passivation of metals by coating with polyaniline:corrosion potential shift and morphological changes[J].Advanced Materials,1994,(6):226-228.
 
【7】Yen Wei,Jianguo Wang,Xinru Jia,et al.Polyaniline as corrosion protection coatings on cold rolled steel[J].Polymer,1995,36:4535-4537.
 
【8】Lu WK,Elsenbaumer RL,Wessling B.Corrosion protection of mild steel by coatings containing polyaniline[J].Synthetic Metal,1995,71:2163-2166.
 
【9】张其锦,翟 焱.聚苯胺的电化学合成实验[J].大学化学,1998,13(4):41-43.
 
【10】Osterholm S E,Cao Y,Klaveter F,et al.Emulsion polymerization of aniline[J].Synthetic Metals,1993,55-57:1034-1038.
 
【11】Angelopoulos M,Maric,Gelorme,et al.Water-soluble electrically conduction polymer,their synthesis and use[P].USE:5370825,1994.
 
【12】Samudson L A,Anaynostopoulos A,Alva K S,et al.Biologically derived conducting and water soluble polyaniline[J].Macromolecules,1998,31:4376.
 
【13】Anton J,Dominis,Geoffreg,et al.A de-doping/re-doping study of organic soluble polyaniline[J].Synthetic Metals,2002,129:165-172.
 
【14】Kwan Sik Jang,Hoosung Lee,Bonyjin Moon,et al.Synthesis and characterization of water soluble polypyrrole doped with functional dopants[J].Synthetic Metals,2004,143:289-294.
 
【15】Shoji Ito,Kazuhiko,Seiichi Jeshima,et al.Simple synthesis of water-soluble conducting polyaniline[J].Synthetic Metals,1998,96:161-163.
 
相关信息
   标题 相关频次
 水溶性聚苯胺对碳钢的缓蚀作用研究
 10
 掺杂态聚苯胺的合成及其在碳钢/HCl体系中的复合缓蚀行为
 4
 过热器化学清洗中金属材料的腐蚀
 4
 火力发电厂高压加热器换热管腐蚀泄漏原因
 4
 火力发电厂空冷凝汽器的腐蚀与防护
 4
 火力发电厂凝汽器铜管冲刷腐蚀原因
 4
 火力发电厂烟气脱硫后烟囱的腐蚀与防护
 4
 FBE与聚苯胺粉末共混涂层的防腐蚀性能
 2
 不同质子酸二次掺杂聚苯胺的导电性能
 2
 采用乙醇胺抑制直接空冷凝汽器运行腐蚀的研究
 2
 掺杂态和本征态聚苯胺对不锈钢的保护作用
 2
 磁化水对金属耐蚀性能的影响
 2
 电化学法合成壳聚糖-聚苯胺复合涂层的耐蚀性
 2
 电化学修饰固相微萃取涂层用于气相色谱-质谱法测定纺织品中的芳香胺
 2
 二次掺杂聚苯胺的防腐蚀性能
 2
 二价铬或锰取代的硅钨杂多酸异构体的聚苯胺掺杂材料的制备及其热稳定性和荧光性能的表征
 2
 二氧化碳对发电机内冷水防腐蚀控制的影响
 2
 高耐蚀GO/PANI涂层的防腐蚀性能及机理
 2
 海洋环境蒙脱土改性聚苯胺环氧涂层的防腐蚀性能
 2
 火力发电厂烟囱涂料防腐蚀工程质量检验方法
 2
 聚苯胺丙烯酸涂层的防腐蚀性能
 2
 聚苯胺对环氧涂层防腐蚀性能的影响
 2
 聚苯胺防腐蚀涂料的研究现状
 2
 聚苯胺纳米纤维超声合成及其防腐蚀性能
 2
 抗坏血酸在β-环糊精/聚苯胺修饰玻碳电极上的电化学行为
 2
 双咪唑啉缓蚀剂的缓蚀性能评价
 2
 水溶性聚苯胺对铸铁的缓蚀作用
 2
 一种咪唑啉缓蚀剂的合成及缓蚀性能评价
 2
 一种咪唑啉缓蚀剂的制备方法及其性能评价
 2
 一种新型聚苯胺涂层的防腐蚀性能
 2