CORROSION PROPERTIES OF ALUMINUM-STEEL EXPLOSIVE CLADDING PLATES
摘 要
采用爆炸焊接方法获得了三种不同的铝-钢爆炸复合板,通过测试其在人造海水中的腐蚀速率,对其腐蚀性能及特征进行了讨论.结果表明:铝-钢爆炸复合板在人造海水中主要发生电偶腐蚀,钢基板腐蚀较轻,铝复板加速腐蚀并且表面形成许多点蚀坑.以不锈钢为基板的铝-钢复合板的腐蚀速率最大.随着时间的延长,三种复合板的腐蚀速率逐渐变小并趋于稳定.
Abstract
Aluminum-steel cladding plates were manufactured by explosive welding.Their corrosion rates were measured in artificial seawater and their corrosion properties were discussed.Galvanic corrosion occurred when the samples were immersed in seawater.The corrosion rate of the flyer plate was accelerated and many pits appeared on the aluminum alloy surface.However,the base plate of steel showed a low corrosion rate due to the protection by the aluminum alloy.The corrosion rate of the cladding plate was the largest when the base plate was stainless steel.And the corrosion rates of the cladding plates became less and stable as the immersing time was prolonged.
中图分类号 TG456.6 TG172
所属栏目 试验研究
基金项目
收稿日期 2007/1/25
修改稿日期 2007/4/5
网络出版日期
作者单位点击查看
引用该论文: WANG Jian-min,ZHU Xi,LIU Run-quan. CORROSION PROPERTIES OF ALUMINUM-STEEL EXPLOSIVE CLADDING PLATES[J]. Corrosion & Protection, 2007, 28(12): 616~618
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】郑远谋.爆炸焊接和金属复合材料及其工程应用[M].长沙:中南大学出版社,2002.
【2】Bernard Crossland.Explosive welding of metals and its applications[M].New York:United States by Oxford University Press,1982.
【3】黄维学,赵路遇.铝-钢爆炸焊接过渡接头的制造和应用[J].材料开发与应用,2000,15(4):35-39.
【4】刘玲霞.钢-铝爆炸复合接头材料的腐蚀与防护[J].兵器材料科学与工程,2003,26(1):36-39.
【5】魏宝明.金属腐蚀理论及应用[M].北京:化学工业出版社,2004.
【2】Bernard Crossland.Explosive welding of metals and its applications[M].New York:United States by Oxford University Press,1982.
【3】黄维学,赵路遇.铝-钢爆炸焊接过渡接头的制造和应用[J].材料开发与应用,2000,15(4):35-39.
【4】刘玲霞.钢-铝爆炸复合接头材料的腐蚀与防护[J].兵器材料科学与工程,2003,26(1):36-39.
【5】魏宝明.金属腐蚀理论及应用[M].北京:化学工业出版社,2004.
相关信息