Influence of Flame Chemical Reaction Thermal Spraying Technology on Ceramic Coating Peformance
摘 要
通过在配制粉料中添加SiO2和TiO2粉末,提高热喷涂的反应温度,由此改进了氧乙炔火焰反应热喷涂工艺.分析了喷涂后涂层的结合强度和耐磨性能,以及各加入成分的含量对涂层性能的影响,通过正交试验得出涂覆粉末的最佳配比.
Abstract
Through the addition of SiO2 and TiO2 powders,the reaction temperature of thermal spraying increased,and the oxyacetylene flame chemical reaction thermal spraying technology was improved.The bond strength and abrasion-resistance of the coating,and the effect of addition content on coating performance were analyzed.The optimum ratio of coating powders was obtained through orthogonal experiments.
中图分类号 T174.45
所属栏目 应用技术
基金项目
收稿日期 2007/6/16
修改稿日期 2007/8/4
网络出版日期
作者单位点击查看
引用该论文: ZHANG Xin,YANG Jian-qiao,JIANG Xiang-jun. Influence of Flame Chemical Reaction Thermal Spraying Technology on Ceramic Coating Peformance[J]. Corrosion & Protection, 2008, 29(5): 287~288
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】孙驱云,宋东阳,孙大毅.氧乙炔焰粉末喷涂工艺[J].水利电力机械,2006,2(28):47-48.
【2】杨建桥,何迎春,杨军,等.氧乙炔反应热喷涂Al2O3 陶瓷涂层性能的研究[J].西北轻工业学院学报,2002,2(20):11-14.
【3】邓世均.高性能陶瓷涂层[M].北京:化学工业出版社,2004.
【2】杨建桥,何迎春,杨军,等.氧乙炔反应热喷涂Al2O3 陶瓷涂层性能的研究[J].西北轻工业学院学报,2002,2(20):11-14.
【3】邓世均.高性能陶瓷涂层[M].北京:化学工业出版社,2004.
相关信息