热喷涂纳米结构涂层研究现状与展望
Research Progress and Prospect of Nanostructure Coatings Prepared by Thermal Spraying
摘 要
综述了国内外在利用热喷涂技术制备纳米结构涂层方面的研究进展.介绍了热喷涂用纳米结构喂料的制备、热喷涂纳米结构涂层的制备方法及涂层性能.与传统材料的热喷涂涂层相比,纳米结构涂层在力学、摩擦学以及耐磨防腐蚀性能方面均有较大提高.
喂料
纳米结构涂层
涂层性能
展望
thermal spraying
feedstock
nano-structured coating
coating property
prospect
Abstract
The research progress and prospect of nano-structured coatings prepared by thermal spraying are reviewed.The preparation of nano-structured feedstock,nano-structured fabrication methods and properties of nanostructured coatings are introduced.Compared with the thermal spray coatings of traditional materials,the mechanical,tribological,anti-wear and anti-corrosion properties of the nano-structured coatings have been enhanced.
中图分类号 TG174.44
所属栏目 专论
基金项目
收稿日期 2007/7/2
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: YANG Jian-qiao,YANG Bao-xing. Research Progress and Prospect of Nanostructure Coatings Prepared by Thermal Spraying[J]. Corrosion & Protection, 2008, 29(5): 290～293
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】吴子健.热喷涂技术与应用[M].北京:机械工业出版社,2006.
【2】徐滨士,刘世参,王海斗.二十一世纪的纳米表面工程[J].机械制造与自动化,2005,34(3):1-8.
【3】Xu Binshi, Ou Zhongwen,Ma Shining,et al.Nano-surface engineering [J].China Mechanical Engineering,2000,11(6):707.
【4】李长青,邓智昌,叶雄林.热喷涂用纳米结构喂料的制备研究[J].新技术新工艺,2003,11:37-38.
【5】Jianhong He,Enrique J Lavernia.Precipitation phenomenon in nanostructured Cr3C2-NiCr coatings[J].Materials Science and Engineer A,2001,301(1):69-79.
【6】李春福 ,王戎 ,刘大红 ,等.掺杂纳米材料对等离子喷涂涂层组织性能的影响[J].材料保护,2003,36(5):21-23.
【7】邸英浩,阎殿然,张建新,等.离子喷涂纳米结构Al2O3/TiO2涂层的组织与性能研究[J].热加工工艺,2005(2):10-15.
【8】G Bolelli,L.,Lusvarghi,T Manfredini,et al.Comparison between plasma and HVOF sprayed ceramic coatings[J].Surface Science and Engineering,2007,1(1):38-61.
【9】牛二武,阎殿然,何继宁,等.SHS等离子喷涂制备FeAl2O4-Al2O3～Fe纳米复合涂层的研究[J].物理学报,2006,55(10):5535-5538.
【10】王铀,田伟,刘刚.热喷涂纳米结构Al2O3/TiO2涂层及其应用[J].材料科学与工艺,2006,14(3):254-257.
【11】张冠忠,毛志强,伍建华.等离子喷涂纳米与非纳米氧化锆的性能比较[J].材料保护,2006,39(9):1-3.
【12】林锋,于月光,蒋显亮,等.等离子体喷涂纳米结构热障涂层微观组织及性能[J].中国有色金属学报,2006,16(3):482-487.
【13】张云乾,丁彰雄,范毅.HVOF喷涂纳米WC-12Co涂层的性能研究[J].中国表面工程,2005,18(6):25-29.
【14】R S Lima,J Karthikeyan,C M Kay,et al.Berndt.Microstructural characteristics of cold-sprayed nanostructured WC-Co Coatings[J].Thin Solid Films,416 (2002) 129-135.
【15】Hyung-Jun Kim,Chang-Hee Lee,Soon-Young Hwang.Superhard nano WC-12%Co coating by cold spray deposition[J].Materials Science and Engineering A,2005,391(25): 243-248.
【16】王瑞雪,刘阳,李曙.爆炸喷涂WC-12%Co涂层的滑动磨损性能[J].中国有色金属学报,2005,15(11):1687-1691.
【17】Picas J A,From A,lgartua A,et al.Mechanical and tribological properties of high velocity oxy-fuel thermal sprayed nanocrystal-line CrC-NiCr coatings.Surface and Coatings Technology,2003,174-175:1095-1100.
【18】Yang Xu,Yaohui Guan,Zhongyu Zheng,et al.Microstructure and tribological properties of plasma-sprayed nanostructured sulfide coating[J].Materials Science and technology,2006,22(5):589-593.
【19】嵇罡,T Grosdidier,郝胜智,等.HVOF喷涂成形纳米晶FeAl厚涂层的结构和热稳定性[J].金属学报,2005,41(6):561-567.
【20】李建国,陈永亮,杜茂华,等.添加纳米CeO2的Ni基合金喷涂层组织和耐磨性研究[J].热加工工艺,2006,35(19):41-42.
【21】P Georgieva,R Thorpe,A Yanski.An Innovative turnover for the wire arc spraying technology[J].International Thermal Spray & Surface Engineering,2006,1(2):68-69.
【2】徐滨士,刘世参,王海斗.二十一世纪的纳米表面工程[J].机械制造与自动化,2005,34(3):1-8.
【3】Xu Binshi, Ou Zhongwen,Ma Shining,et al.Nano-surface engineering [J].China Mechanical Engineering,2000,11(6):707.
【4】李长青,邓智昌,叶雄林.热喷涂用纳米结构喂料的制备研究[J].新技术新工艺,2003,11:37-38.
【5】Jianhong He,Enrique J Lavernia.Precipitation phenomenon in nanostructured Cr3C2-NiCr coatings[J].Materials Science and Engineer A,2001,301(1):69-79.
【6】李春福 ,王戎 ,刘大红 ,等.掺杂纳米材料对等离子喷涂涂层组织性能的影响[J].材料保护,2003,36(5):21-23.
【7】邸英浩,阎殿然,张建新,等.离子喷涂纳米结构Al2O3/TiO2涂层的组织与性能研究[J].热加工工艺,2005(2):10-15.
【8】G Bolelli,L.,Lusvarghi,T Manfredini,et al.Comparison between plasma and HVOF sprayed ceramic coatings[J].Surface Science and Engineering,2007,1(1):38-61.
【9】牛二武,阎殿然,何继宁,等.SHS等离子喷涂制备FeAl2O4-Al2O3～Fe纳米复合涂层的研究[J].物理学报,2006,55(10):5535-5538.
【10】王铀,田伟,刘刚.热喷涂纳米结构Al2O3/TiO2涂层及其应用[J].材料科学与工艺,2006,14(3):254-257.
【11】张冠忠,毛志强,伍建华.等离子喷涂纳米与非纳米氧化锆的性能比较[J].材料保护,2006,39(9):1-3.
【12】林锋,于月光,蒋显亮,等.等离子体喷涂纳米结构热障涂层微观组织及性能[J].中国有色金属学报,2006,16(3):482-487.
【13】张云乾,丁彰雄,范毅.HVOF喷涂纳米WC-12Co涂层的性能研究[J].中国表面工程,2005,18(6):25-29.
【14】R S Lima,J Karthikeyan,C M Kay,et al.Berndt.Microstructural characteristics of cold-sprayed nanostructured WC-Co Coatings[J].Thin Solid Films,416 (2002) 129-135.
【15】Hyung-Jun Kim,Chang-Hee Lee,Soon-Young Hwang.Superhard nano WC-12%Co coating by cold spray deposition[J].Materials Science and Engineering A,2005,391(25): 243-248.
【16】王瑞雪,刘阳,李曙.爆炸喷涂WC-12%Co涂层的滑动磨损性能[J].中国有色金属学报,2005,15(11):1687-1691.
【17】Picas J A,From A,lgartua A,et al.Mechanical and tribological properties of high velocity oxy-fuel thermal sprayed nanocrystal-line CrC-NiCr coatings.Surface and Coatings Technology,2003,174-175:1095-1100.
【18】Yang Xu,Yaohui Guan,Zhongyu Zheng,et al.Microstructure and tribological properties of plasma-sprayed nanostructured sulfide coating[J].Materials Science and technology,2006,22(5):589-593.
【19】嵇罡,T Grosdidier,郝胜智,等.HVOF喷涂成形纳米晶FeAl厚涂层的结构和热稳定性[J].金属学报,2005,41(6):561-567.
【20】李建国,陈永亮,杜茂华,等.添加纳米CeO2的Ni基合金喷涂层组织和耐磨性研究[J].热加工工艺,2006,35(19):41-42.
【21】P Georgieva,R Thorpe,A Yanski.An Innovative turnover for the wire arc spraying technology[J].International Thermal Spray & Surface Engineering,2006,1(2):68-69.
相关信息
