Sterilizing Effect of Ozone in Water Cooling Circulation Treatment
摘 要
以硫酸盐还原菌、铁细菌以及异养菌数为指标,研究臭氧对石化厂循环冷却水的杀菌效果,考察了臭氧投加量、灭活时间、温度及pH等影响因素.结果表明,在投加量为100 mg/L,灭菌时间为16 min时,臭氧杀菌效率可达到99.9%以上,出水细菌数达到化工行业循环冷却水处理标准.温度和pH值的改变对杀菌效果影响不大.
Abstract
Using sulfate-reducing bacteria,iron bacteria and heterotrophic bacteria as paramaters,the sterilization effect of ozone on circulating cooling water of petrochemical plants was studied.The affecting factors of ozone dosage,disinfection time,temperature and pH were evaluated.When the ozone dosage was 100 mg / L and the sterilization time was 16 min,99.9% of the microbes could be sterilized,and the circulating cooling water quality standard of chemical enterprises could be satisfied.Temperature and pH of water almost had no effect on the treating.
中图分类号 X703.1 TG172.7
所属栏目 应用技术
基金项目
收稿日期 2008/7/25
修改稿日期 2008/8/12
网络出版日期
作者单位点击查看
引用该论文: LI Jing-ping,WANG Lei,CHEN Jing-run,ZHAO Zhong-liang,JIANG Lin-shi,ZHANG Hong-lin. Sterilizing Effect of Ozone in Water Cooling Circulation Treatment[J]. Corrosion & Protection, 2008, 29(12): 768~769
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李松田,邢朝晖,李长浩.循环冷却水中臭氧的杀菌作用[J].四川环境,2005,24(5):4-5,12.
【2】高南飞.臭氧技术在处理生活污水方面的研究[D].吉林:吉林大学,2004.
【3】光辉.臭氧杀菌在工业循环冷却水中的应用[J].石油化工腐蚀与防护,2000,17(2):45-46.
【4】HG/T 20690-2000,化工企业循环冷却水处理设计技术规定[S].
【2】高南飞.臭氧技术在处理生活污水方面的研究[D].吉林:吉林大学,2004.
【3】光辉.臭氧杀菌在工业循环冷却水中的应用[J].石油化工腐蚀与防护,2000,17(2):45-46.
【4】HG/T 20690-2000,化工企业循环冷却水处理设计技术规定[S].
相关信息