Comparison and Selection of External Anti-corrosive Joint Coating Materials of Oil and Gas pipelines
摘 要
管道外防护补口关系到整条管线的的防腐蚀质量,是导致管道失效的薄弱环节.在众多补口材料当中,如何选择能满足防腐蚀性能、施工条件等多种要求的补口材料尤显重要.本文首先分析了埋地管道补口存在的问题,对常见的近十种防护补口材料的性能进行了评价:在此基础上,构建了防护补口材料比选的指标体系,依据材料对指标体系的符合程度进行评价,最后推荐3PE、2层FBE以及聚脲作为当前最佳的补口材料.
Abstract
The external anticorrosive joint coating of pipeline referred to the preservative quality of the whole pipeline is the weak links resulting in the pipeline failure.Among the numerous anti-corrosion materials,how to choose joint coating material to meet the many requirements such as the anti-corrosion properties and construction conditions is of the utmost importance.Many problems existing in the pipeline anticorrosion joint-coating were analyzed.The properties of about 10 types of anti-corrosion joint-coating materials were evaluated.On this basis,the compared research concept was used to construct comparison and selection index system of anticorrosion joint coating materials,and to evaluate material on the basis of the extent of various materials conforming to the index system.3 layers of PE,2 layers of FBE and polyurea are recommended as the current best anti-corrosion joint-coating materials.
中图分类号 TE988.2
所属栏目 应用技术
基金项目
收稿日期 2008/4/5
修改稿日期 2008/4/29
网络出版日期
作者单位点击查看
引用该论文: LUO Bin,HUO Ji-wei,LI Xin,ZHAO Zhong-gang. Comparison and Selection of External Anti-corrosive Joint Coating Materials of Oil and Gas pipelines[J]. Corrosion & Protection, 2009, 30(4): 258~260
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】陈守平,莫荣.开发喷涂补口新技术提高整体防腐新水平[J].石油科技论坛,2006(6):41-44.
【2】古小平,龙东,邱永波,等.油气管道补口技术综述[J].腐蚀与防护,2009,30(4):261-264.
【3】任立元,翁乐宁,孟庆丽.管道三层热缩套(带)现场补口应注意的问题[J].材料保护,2005(10):58-62.
【4】孙敬清.城市埋地燃气钢质管道外防腐层检测评价技术研究及检验软件开发[D].北京化工大学硕士论文,2004.
【5】米琪.管道防腐层补口与熔结环氧粉末涂层(FBE)补口材料的选择[J].城市煤气,2001(5):4-8.
【6】张韡程,郜玉新.聚脲防腐管道[J].油气田地面工程,2006(2).
【7】张松柏,王 丽.管道多层覆盖层系统的评价[J].油气储运,2001,20(6):23-25.
【8】李浩.西气东输工程支线管道现场补口材料的选用[J].天然气与石油,2003,21(2):39-40.
【9】董振丰,赵常英.埋地钢质管道熔结环氧粉末外防腐补口方法比较[J].管道技术与设备,2002(3):30-31.
【10】夏炜东.三种主要管道覆盖层的应用比较[J].油气储运,2000,19(2):32-36.
【11】李泉明(译).挤出聚乙烯覆盖层应用的新进展[J].油气储运,1997,16(4):53-56.
【12】刘文军,梁一彪.密封性试验方法在补口技术比选中的应用[J].油气储运,2003,22(5):38-42.
【13】陈航.埋地钢质管道补口材料的优化研究[J].管道技术与设备,2005(1):39-41.
【14】吴艳阳,郭生武,陈开勋.埋地钢质管道补口材料的选择[J].全面腐蚀控制,2003,17(3):31-34.
【15】Dennis Neal.Comparison of performance of field applied weld coatings[J].Coating & Linings,1997(1).
【2】古小平,龙东,邱永波,等.油气管道补口技术综述[J].腐蚀与防护,2009,30(4):261-264.
【3】任立元,翁乐宁,孟庆丽.管道三层热缩套(带)现场补口应注意的问题[J].材料保护,2005(10):58-62.
【4】孙敬清.城市埋地燃气钢质管道外防腐层检测评价技术研究及检验软件开发[D].北京化工大学硕士论文,2004.
【5】米琪.管道防腐层补口与熔结环氧粉末涂层(FBE)补口材料的选择[J].城市煤气,2001(5):4-8.
【6】张韡程,郜玉新.聚脲防腐管道[J].油气田地面工程,2006(2).
【7】张松柏,王 丽.管道多层覆盖层系统的评价[J].油气储运,2001,20(6):23-25.
【8】李浩.西气东输工程支线管道现场补口材料的选用[J].天然气与石油,2003,21(2):39-40.
【9】董振丰,赵常英.埋地钢质管道熔结环氧粉末外防腐补口方法比较[J].管道技术与设备,2002(3):30-31.
【10】夏炜东.三种主要管道覆盖层的应用比较[J].油气储运,2000,19(2):32-36.
【11】李泉明(译).挤出聚乙烯覆盖层应用的新进展[J].油气储运,1997,16(4):53-56.
【12】刘文军,梁一彪.密封性试验方法在补口技术比选中的应用[J].油气储运,2003,22(5):38-42.
【13】陈航.埋地钢质管道补口材料的优化研究[J].管道技术与设备,2005(1):39-41.
【14】吴艳阳,郭生武,陈开勋.埋地钢质管道补口材料的选择[J].全面腐蚀控制,2003,17(3):31-34.
【15】Dennis Neal.Comparison of performance of field applied weld coatings[J].Coating & Linings,1997(1).
相关信息