Influence of Ni and Cr on Anti-corrosion Performance of Tungsten Carbide Base Hard Alloy
摘 要
以WC-(7~10)Ni-(1~2)Cr合金为研究对象,采用失重法、电化学测试、力学性能测试和显微形貌分析等方法,研究了合金在体积比为10%稀硫酸、10%稀盐酸和10%稀硝酸溶液中的腐蚀行为,并与传统的WC-8Co和WC-13Co硬质合金进行比较.结果表明,WC-(7~10)Ni-(1~2)Cr的抗弯强度、硬度略低于WC-8Co和WC-13Co;在浸泡腐蚀试验和电化学试验中,WC-Ni-Cr合金的耐腐蚀能力明显优于传统的WC-Co类合金,具有较强的抗腐蚀能力,适合石油化工、环保、食品领域的耐磨、耐腐蚀材料.
Abstract
By using the methods of weight loss,electrochemical testing,mechanical property testing and morphology analysis,the corrosion behavior of WC-(7~10) Ni-(1~2) Cr alloys was studied in 10% (volume ratio) dilute sulphuric acid,10% dilute hydrochloric acid and 10% dilute HNO3 solution respectively,and compared with that of traditional WC-8Co and WC-13Co hard alloys.The results indicated that the bending strength and hardness of WC-(7~10) Ni-(1~2) Cr were lower than those of WC-8Co and WC-13Co hard alloys slightly.In the immersion corrosion testing and electrochemical experiment,those of WC-Ni-Cr the anti-corrosion ability alloy surpassed those of traditional WC-Co alloys obviously,indicating that the WC-Ni-Cr alloy had stronger corrosion resistance.good application prospect in petro-chemical industry,environmental protection and food industry as wear resistant and anti-corrosive material.
中图分类号 TG135 TG174.2
所属栏目 试验研究
基金项目 上海市科学技术委员会应用技术开发专项资金项目(09-101)
收稿日期 2010/6/18
修改稿日期 2010/7/8
网络出版日期
作者单位点击查看
备注林春芳,工程师.
引用该论文: LIN Chun-fang,DU Yu-guo,SUN dan,CHEN Bei-jin,LIU Ying-hua. Influence of Ni and Cr on Anti-corrosion Performance of Tungsten Carbide Base Hard Alloy[J]. Corrosion & Protection, 2010, 31(9): 678~681
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】姜媛媛,易丹青,李存,等.WC-9Ni-0.57Cr硬质合金在模拟海水中的腐蚀特性[J].材料科学与工程学报,2008,115(5):785-789.
【2】陈得勇,罗在清.WC-Ni硬质合金的特性、发展及其应用[J].硬质合金,2007,24(1):40-44.
【3】陈康华,邹 丹,李詠侠.硬质合金钝化与伪钝化行为的研究进展[J].硬质合金,2007,24(3):181-187.
【4】胡道平,何宝山,孔德会.Cr含量对WC基硬质合金耐腐蚀性能的影响[J].腐蚀与防护,2006,27(8):382-386.
【5】李宝生.碳化钨基硬质合金的抗蚀性[J].粉末冶金技术,1984,4(2):8-14.
【6】梁平,苏华,田兴才.添加Cr3C2对WC-Ni硬质合金性能的影响[J].稀有金属与硬质合金,1988(12):15-19.
【2】陈得勇,罗在清.WC-Ni硬质合金的特性、发展及其应用[J].硬质合金,2007,24(1):40-44.
【3】陈康华,邹 丹,李詠侠.硬质合金钝化与伪钝化行为的研究进展[J].硬质合金,2007,24(3):181-187.
【4】胡道平,何宝山,孔德会.Cr含量对WC基硬质合金耐腐蚀性能的影响[J].腐蚀与防护,2006,27(8):382-386.
【5】李宝生.碳化钨基硬质合金的抗蚀性[J].粉末冶金技术,1984,4(2):8-14.
【6】梁平,苏华,田兴才.添加Cr3C2对WC-Ni硬质合金性能的影响[J].稀有金属与硬质合金,1988(12):15-19.
相关信息