采用有向图法评价陶瓷材料的可加工性
Digraph Method for Machinability Evaluation of Ceramic Materials
摘 要
提出了一种陶瓷材料可加工性综合评价的新方法——有向图法,并制备出六种不同CePO4含量的Ce-ZrO2/CePO4复合陶瓷材料,进行了可加工性评价和钻削加工试验.结果表明:对材料的可加工性评价排序结果与试验结果吻合,该方法可用于陶瓷材料可加工性的评价.
可加工性
评价
有向图
machinable ceramic
machinability
evaluation
digraph
Abstract
A new method—digraph method was proposed for comprehensive evaluation of machinability of ceramic materials.Six composites consisting of CePO4 and zirconia were fabricated,Machinability of the six ceramics were evaluated and drilled testing was performed.The experimental results were in accordance with the rank of machinability evaluation of ceramics.This method can be used in machinability evaluation of ceramic materials.
中图分类号 TG580
所属栏目
基金项目 国家自然科学基金资助项目(50305023)
收稿日期 2004/11/29
修改稿日期 2005/3/28
网络出版日期
作者单位点击查看
备注钟利军(1969-),男,内蒙古赤峰人,硕士.
引用该论文: ZHONG Li-jun,YU Ai-bing,MA Lian-jie,LIU Ji-guang. Digraph Method for Machinability Evaluation of Ceramic Materials[J]. Materials for mechancial engineering, 2006, 30(2): 35～38
钟利军,于爱兵,马廉洁,刘继广. 采用有向图法评价陶瓷材料的可加工性[J]. 机械工程材料, 2006, 30(2): 35～38
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Yu A B,Zhong L J,Liu J C,et al.Machinability evaluation of Ce-ZrO2/CePO4 ceramics[J].Key Engineering Materials,2004,259-260:259-263.
【2】Yu A B,Zhong L J,Liu J C,et al.Cutability evaluation of oxide ceramics containing rare earth phosphates[J].Journal of Rare Earth,2003,21(suppl.):93-98.
【3】Inasaki I.Grinding of hard and brittle materials[J].Annals of the CIRP,1987,36(2):463-471.
【4】Jurkat W B,Ryser H J.Matrix factorizations of determinants and permanents[J].Journal of Algebra,1966,3:1-27.
【5】Nijenhuis A,Wilf H S.Combinatorial algorithms for computers and calculators[M].New York:Academic Press,1978.
【6】关振铎,张中太,焦金生.无机材料物理性能[M].北京:清华大学出版社,1992.
【7】Davis J B,Marshall D B,Housley R M,et al.Machinable ceramics containing rare-earth phosphates[J].Journal of the American Ceramic Society,1998,81:2169-2175.
【8】王瑞刚,潘 伟,蒋蒙宁,等.层片状LaP04陶瓷的力学性能与显微结构[J].无机材料学报,2003,18(1):109-114.
【9】Zhou Zhen-jun,Yang Zheng-fang,Yuan Qi-ming,et al.Preparation of machinable Y-TZP/LaPO4 composite ceramics by liquid precursor infiltration[J].Journal of Rare Earths,2002,20(3):197-203.
【2】Yu A B,Zhong L J,Liu J C,et al.Cutability evaluation of oxide ceramics containing rare earth phosphates[J].Journal of Rare Earth,2003,21(suppl.):93-98.
【3】Inasaki I.Grinding of hard and brittle materials[J].Annals of the CIRP,1987,36(2):463-471.
【4】Jurkat W B,Ryser H J.Matrix factorizations of determinants and permanents[J].Journal of Algebra,1966,3:1-27.
【5】Nijenhuis A,Wilf H S.Combinatorial algorithms for computers and calculators[M].New York:Academic Press,1978.
【6】关振铎,张中太,焦金生.无机材料物理性能[M].北京:清华大学出版社,1992.
【7】Davis J B,Marshall D B,Housley R M,et al.Machinable ceramics containing rare-earth phosphates[J].Journal of the American Ceramic Society,1998,81:2169-2175.
【8】王瑞刚,潘 伟,蒋蒙宁,等.层片状LaP04陶瓷的力学性能与显微结构[J].无机材料学报,2003,18(1):109-114.
【9】Zhou Zhen-jun,Yang Zheng-fang,Yuan Qi-ming,et al.Preparation of machinable Y-TZP/LaPO4 composite ceramics by liquid precursor infiltration[J].Journal of Rare Earths,2002,20(3):197-203.
相关信息
