Observation of Carbon Distribution in Pearlite-Austenite Dissimilar Steel Welded Joints
摘 要
利用场发射枪超高分辨扫描电镜(FESEM)和能谱仪(EDS),跟踪研究了珠光体-奥氏体异种钢焊接接头中熔合区的碳迁移现象.结果表明:接头在焊后热处理过程中,熔合区附近发生明显的碳迁移现象.随着热处理时间的延长,类马氏体层的宽度并无明显的变化;但在不同宽度的类马氏体层中,碳迁移呈现不同的行为,相比窄类马氏体层,碳在宽类马氏体层中的迁移速度更快.
Abstract
Carbon migration process around the fusion boundary in the pearlite-austenite dissimilar steel welded joints was studied with “in-situ” mode by using FESEM and EDS.The carbon migration occurred obviously in the fusion boundary during post-weld heat treatment.The width of the martensite-like layer kept invariable during heat treatment period.However,carbon migration played different actions in various widths of martensite-like layers,i.e.,the migration rate in a wide martensite-like layer was faster than that in a narrow martensite-like layer.
中图分类号 TG441.8
所属栏目
基金项目 石油科技中青年创新基金资助项目(2002CX05);教育部全国优秀博士学位论文作者专项资金资助项目(200233)
收稿日期 2005/1/22
修改稿日期 2005/2/1
网络出版日期
作者单位点击查看
备注黄文长(1975-),男,福建上杭人,工程师,硕士研究生.
引用该论文: HUANG Wen-zhang,PAN Chun-xu,FU Qiang. Observation of Carbon Distribution in Pearlite-Austenite Dissimilar Steel Welded Joints[J]. Materials for mechancial engineering, 2006, 30(4): 17~19
黄文长,潘春旭,付强. 珠光体-奥氏体异种钢焊接接头中碳迁移的跟踪观测[J]. 机械工程材料, 2006, 30(4): 17~19
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】潘春旭.异种金属焊接——显微结构特征及其转变机理[M].北京:人民交通出版社,2000.
【2】周宣,张志高,等.Cr5Mo钢管异种接头中碳迁移的研究[J].华中理工大学学报,1995,1995,23(1):30-34.
【3】李萌盛.异质焊接接头加热过程中的碳迁移现象研究[J].材料科学与工艺,1997,5(3):17-21.
【4】Pavlovsky J,Million B.Carbon redistribution between an austenitic cladding and a ferritic steel for pressure vessels of a nuclear reactor[J].Materials Science and Engineering,1991,A149:105-110.
【2】周宣,张志高,等.Cr5Mo钢管异种接头中碳迁移的研究[J].华中理工大学学报,1995,1995,23(1):30-34.
【3】李萌盛.异质焊接接头加热过程中的碳迁移现象研究[J].材料科学与工艺,1997,5(3):17-21.
【4】Pavlovsky J,Million B.Carbon redistribution between an austenitic cladding and a ferritic steel for pressure vessels of a nuclear reactor[J].Materials Science and Engineering,1991,A149:105-110.
相关信息