Preparation of Ultra-high Molecular Weight Polyethylene Coating on Metal
摘 要
通过铸造方法在金属表面形成“拉钩”结构,再采用模压成型,在金属表面制备了超高分子量聚乙烯涂层,对涂层性能进行了研究.结果表明:“拉钩”结构提高了基体与涂层的结合力;预压(6MPa)→烧结(200~210℃×3.5h)→加压(8MPa)→保压→冷却→出模的模压成型工艺可在金属表面制备出超高分子量聚乙烯涂层,且涂层具有良好的耐磨性及导热性.
Abstract
Ultra-high molecular weight polyethylene (UHMWPE) coating was prepared on the hooked surface of metal by casting and molding.The result showed that hooked structure improved the binding force between matrix and coating.The molding technology,including prepressing (6MPa)→sintering(200~210℃×3.5h)→pressurization(8MPa)→pressure holded→cooling→mold unloading,could prepare UHMWPE coating on the hooked surface of metal matrix,and prepared specimen had good wearability and thermal conductivity.
中图分类号 TG174.464
所属栏目
基金项目 湖北省教育厅科学研究基金资助项目(2000D04003)
收稿日期 2005/2/2
修改稿日期 2005/4/26
网络出版日期
作者单位点击查看
备注夏露(1971-),女,湖北武穴人,讲师,硕士.
引用该论文: XIA Lu,ZHANG You-shou,HUANG Jin. Preparation of Ultra-high Molecular Weight Polyethylene Coating on Metal[J]. Materials for mechancial engineering, 2006, 30(4): 41~43
夏露,张友寿,黄晋. 金属表面超高分子量聚乙烯涂层的制备[J]. 机械工程材料, 2006, 30(4): 41~43
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】梁淑君,贾润礼.超高分子量聚乙烯的研究现状[J].山西化工,2002,22(2):20-22.
【2】刘广建.填料对超高分子量聚乙烯的改性及其在矿山的应用[J].现代塑料加工应用,2000,10(4):12-14.
【3】Barett T S,Stachowiak G W,Batchelor A W.Effect of roughness and sliding speed on the wear and friction of ultra-high molecular weight polyethylene[J].Wear,1992,153:331-350.
【4】Kemick M,Allen C.The sliding wear of UHMWPE against zirconia in saline containing proteins[J].Wear,1997,158:537-543.
【5】蒋启柏,薛平,何亚东,等.超高分子量聚乙烯复合材料的发展[J].工程塑料应用,2000,28(3):36-38.
【6】雷华,胡平,周明波,等.超高分子量聚乙烯流动改性剂研究进展[J].现代材料加工应用,1999,11(4):50-53.
【7】何春霞,顾红艳.不同材料填充超高摩尔量聚乙烯复合材料的力学性能[J].塑料工业,2002,30(5):29-31.
【8】刘朝宗,任霞泉,蒋曼,等.填料改性UHMWPE基复合材料拉伸磨损性能的研究[J].吉林工业大学学报,1996,26(3):42-45.
【9】赵德仁,张慰.高聚物合成工艺学(第二版)[M].上海:华工理工大学出版社,1997.
【10】刘广建.超高分子量聚乙烯在轴套、轴承上的应用[J].工程塑料应用,1995,23(5):22-24.
【2】刘广建.填料对超高分子量聚乙烯的改性及其在矿山的应用[J].现代塑料加工应用,2000,10(4):12-14.
【3】Barett T S,Stachowiak G W,Batchelor A W.Effect of roughness and sliding speed on the wear and friction of ultra-high molecular weight polyethylene[J].Wear,1992,153:331-350.
【4】Kemick M,Allen C.The sliding wear of UHMWPE against zirconia in saline containing proteins[J].Wear,1997,158:537-543.
【5】蒋启柏,薛平,何亚东,等.超高分子量聚乙烯复合材料的发展[J].工程塑料应用,2000,28(3):36-38.
【6】雷华,胡平,周明波,等.超高分子量聚乙烯流动改性剂研究进展[J].现代材料加工应用,1999,11(4):50-53.
【7】何春霞,顾红艳.不同材料填充超高摩尔量聚乙烯复合材料的力学性能[J].塑料工业,2002,30(5):29-31.
【8】刘朝宗,任霞泉,蒋曼,等.填料改性UHMWPE基复合材料拉伸磨损性能的研究[J].吉林工业大学学报,1996,26(3):42-45.
【9】赵德仁,张慰.高聚物合成工艺学(第二版)[M].上海:华工理工大学出版社,1997.
【10】刘广建.超高分子量聚乙烯在轴套、轴承上的应用[J].工程塑料应用,1995,23(5):22-24.
相关信息