颗粒增强镁基复合材料的研究进展
Review on Particulates Reinforced Magnesium Matrix Composites
摘 要
镁基复合材料具有很高的比强度、比刚度以及优良的阻尼减震性能,是汽车制造、航空航天等领域的理想材料之一.综述了颗粒增强镁基复合材料的研究概况,着重介绍了其制备方法、力学以及阻尼性能,并展望了它的发展趋势.
颗粒增强
制备方法
性能
magnesium matrix composite
particulate reinforcement
fabrication method
property
Abstract
Particulates reinforced magnesium matrix composites (PRMMCs) have a great potential to be applied in automobile and aerospace industries because of their high specific strength and stiffness,as well as their good damping capacities.The studies on PRMMCs,especially on their fabrication methods,mechanical and damping properties are reviewed.The studying trend is approached from different aspects.
中图分类号 TG146.2 TB333
所属栏目
基金项目 国家863计划资助项目(2002AA334010)
收稿日期 2005/6/8
修改稿日期 2005/8/20
网络出版日期
作者单位点击查看
备注赵常利(1977-),男,河北衡水人,硕士研究生.
引用该论文: ZHAO Chang-li,ZHANG Xiao-nong. Review on Particulates Reinforced Magnesium Matrix Composites[J]. Materials for mechancial engineering, 2006, 30(7): 1～3
赵常利,张小农. 颗粒增强镁基复合材料的研究进展[J]. 机械工程材料, 2006, 30(7): 1～3
被引情况:
【1】阮爱杰,马立群,卞亚娟,潘安霞,丁毅, "SiCp增强镁-锌-锆合金基复合材料的阻尼性能",机械工程材料 34, 62-65(2010)
【2】韩田田,王砚军,杨丽颖, "低孔隙度高温自润滑微孔预制体孔径计算方程的建立及验证",机械工程材料 39, 63-66(2015)
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Saravanan R A,Surappa M K.Fabrication and characterization of pure magnesium-30vol.% SiCp particle composite[J].Mater Sci Eng,2000,A276:108-116.
【2】郗雨林,张文兴.粉末冶金法制备SiC颗粒增强镁基复合材料工艺及性能的研究[J].热加工工艺,2001,(5):24-26.
【3】李荣华,黄继华,殷声.镁基复合材料研究现状与展望[J].材料导报,2002,16(8):17-18.
【4】Perez P,Garces G.Mechanical properties of a Mg-10vol%Ti composite[J].Comp Sci Tech,2004,64:145-151.
【5】Lu L,Lai M O,Froyen L.Effect of mechanical milling on the properties of Mg-10.3%Ti and Mg-5%Al-10.3%Ti metal-metal composite[J].Journal of Alloy and Compounds,2005,387:260-264.
【6】Hassan S F,Gupta M.Development of a novel magnesium/nickel composite with improved mechanical properties[J].Journal of Alloys and Compounds,2002,35:L10-L15.
【7】Ho K F,Gupta M,Srivatsan T S.The mechanical behavior of magnesium alloy AZ91 reinforced with fine copper particulates[J].Mater Sci Eng,2004,A369:302-308.
【2】郗雨林,张文兴.粉末冶金法制备SiC颗粒增强镁基复合材料工艺及性能的研究[J].热加工工艺,2001,(5):24-26.
【3】李荣华,黄继华,殷声.镁基复合材料研究现状与展望[J].材料导报,2002,16(8):17-18.
【4】Perez P,Garces G.Mechanical properties of a Mg-10vol%Ti composite[J].Comp Sci Tech,2004,64:145-151.
【5】Lu L,Lai M O,Froyen L.Effect of mechanical milling on the properties of Mg-10.3%Ti and Mg-5%Al-10.3%Ti metal-metal composite[J].Journal of Alloy and Compounds,2005,387:260-264.
【6】Hassan S F,Gupta M.Development of a novel magnesium/nickel composite with improved mechanical properties[J].Journal of Alloys and Compounds,2002,35:L10-L15.
【7】Ho K F,Gupta M,Srivatsan T S.The mechanical behavior of magnesium alloy AZ91 reinforced with fine copper particulates[J].Mater Sci Eng,2004,A369:302-308.
相关信息
