Microstructure and Properties of Stainless Steels Processed by Accumulative Roll-bonding
摘 要
采用累积叠轧焊工艺制备了超细晶组织不锈钢薄板,并对其微观结构、力学性能及断裂方式进行了分析.结果表明:累积叠轧后材料中晶粒呈扁平状,抗拉强度显著提高,经过两道叠轧后抗拉强度可达1 060 MPa;拉伸断口有一定的颈缩现象,整个断面呈韧窝状,为韧性断裂.
Abstract
Accumulative roll-bonding(ARB) was employed to produce ultra-fine grain microstructures in stainless steels.Microstructure,mechanical properties and fracture surface were examined.The ARB processed materials had lamellar ultra-fine grains,and the tensile strength was improved remarkably.The tensile strength of the stainless steel could reach 1 060 MPa.Slight necking was found near the fracture tip and there were dimples on the whole fracture surface,indicating that the fracture was ductile.
中图分类号 TG142.1 TG335.5
所属栏目
基金项目 上海市教委科技基金资助项目(04OB14)
收稿日期 2005/7/11
修改稿日期 2005/9/4
网络出版日期
作者单位点击查看
备注方建敏(1981-),男,安徽宁国人,硕士研究生.
引用该论文: FANG Jian-min,ZHANG Xin-yao,SHAN Ai-dang,WU Jian-sheng. Microstructure and Properties of Stainless Steels Processed by Accumulative Roll-bonding[J]. Materials for mechancial engineering, 2006, 30(8): 16~18
方建敏,张杏耀,单爱党,吴建生. 累积叠轧焊不锈钢的组织和性能[J]. 机械工程材料, 2006, 30(8): 16~18
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Saito Y,Utsunomiya H,Tsuji N,et al.Novel ultra-high straining process for bulk materials-development of the accumulative roll-bonding(ARB) process[J].Scripta Materialia,1998,47:579-583.
【2】Saito Y,Tsuji N,Utsuna miya H,et al.Ultra-fine grained bulk aluminum produced by accumulative roll-bonding(ARB) process[J].Scripta Materialia,1998,39(9):1221-1227.
【3】Lee S H,Saito Y,Tsuji N H,et al.Role of shear in ultragrain refinement by accumulative roll-bonding(ARB) process[J].Scripta Materialia,2002,46:281-285.
【4】Tsuji N,Ueji R,Minamino Y.Nanoscale crystallographic analysis of ultra-fine grained IF steel fabricated by ARB process[J].Scripta Materialia,2002,47:69-76.
【5】赵新奇,张俊宝,徐政,等.累积叠轧焊制备超精细IF钢微观组织与力学性能[J].上海有色金属,2002,23(3):107-110.
【6】Stolyarov V V,Zhu Y T,Lowe T C,et al.Microstructure and properties of pure Ti processed by ECAP and cold extrusion[J].Mater Sci Eng,2001,A303:82-89.
【7】Stolyarov V V,Zhu Y T,Alexandrov I V,et al.Influence of ECAP routes on the microstructure and properties of pure Ti[J].Mater Sci Eng,2001,A299:59-67.
【8】Howe A A.Ultra-fine grained steels:industrial prospects[J].Mater Sci Technol,2000,16:1264-1266.
【9】Lee S H,Saito Y,Sakai T,et al.Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll-bonding[J].Materials Science and Engineering A,2002,325:228-235.
【10】Kamikawa N,Tsuji N,Minamino Y.Microstructure and texture through thickness of ultra-low carbon IF steel sheet severely deformation by accumulative roll-bonding[J].Science and Technology of Advanced Materials,2004,5:163-172.
【11】李亚江,王 娟,尹衍升,等.Fe3Al/18-8不锈钢扩散焊界面附近的元素扩散[J].金属学报,2005,41(2):150-156.
【12】严慕容,陈美贞.退火对304不锈钢拉伸坯料力学性能的影响[J].农机化研究,2002,(4):151-153.
【13】崔约贤,王长利.金属断口分析[M].哈尔滨:哈尔滨工业大学出版社,1998.
【2】Saito Y,Tsuji N,Utsuna miya H,et al.Ultra-fine grained bulk aluminum produced by accumulative roll-bonding(ARB) process[J].Scripta Materialia,1998,39(9):1221-1227.
【3】Lee S H,Saito Y,Tsuji N H,et al.Role of shear in ultragrain refinement by accumulative roll-bonding(ARB) process[J].Scripta Materialia,2002,46:281-285.
【4】Tsuji N,Ueji R,Minamino Y.Nanoscale crystallographic analysis of ultra-fine grained IF steel fabricated by ARB process[J].Scripta Materialia,2002,47:69-76.
【5】赵新奇,张俊宝,徐政,等.累积叠轧焊制备超精细IF钢微观组织与力学性能[J].上海有色金属,2002,23(3):107-110.
【6】Stolyarov V V,Zhu Y T,Lowe T C,et al.Microstructure and properties of pure Ti processed by ECAP and cold extrusion[J].Mater Sci Eng,2001,A303:82-89.
【7】Stolyarov V V,Zhu Y T,Alexandrov I V,et al.Influence of ECAP routes on the microstructure and properties of pure Ti[J].Mater Sci Eng,2001,A299:59-67.
【8】Howe A A.Ultra-fine grained steels:industrial prospects[J].Mater Sci Technol,2000,16:1264-1266.
【9】Lee S H,Saito Y,Sakai T,et al.Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll-bonding[J].Materials Science and Engineering A,2002,325:228-235.
【10】Kamikawa N,Tsuji N,Minamino Y.Microstructure and texture through thickness of ultra-low carbon IF steel sheet severely deformation by accumulative roll-bonding[J].Science and Technology of Advanced Materials,2004,5:163-172.
【11】李亚江,王 娟,尹衍升,等.Fe3Al/18-8不锈钢扩散焊界面附近的元素扩散[J].金属学报,2005,41(2):150-156.
【12】严慕容,陈美贞.退火对304不锈钢拉伸坯料力学性能的影响[J].农机化研究,2002,(4):151-153.
【13】崔约贤,王长利.金属断口分析[M].哈尔滨:哈尔滨工业大学出版社,1998.
相关信息