Preparation and Thermal Properties of PA66/MMT Nanocomposites
摘 要
通过熔融插层法制备了尼龙66/蒙脱土(PA66/MMT)纳米复合材料,利用XRD、DSC、TGA和DMA对材料进行了表征.结果表明:复合材料中随着纳米MMT加入量的增多,结晶度降低,过冷度减少,同时晶粒尺寸变小;通过MMT的插层复合,提高了PA66的热分解温度,同时也提高了材料的储存模量及玻璃化转变温度.
Abstract
PA66/MMT nanocomposites were prepared by direct melt blending.XRD results proved that intercalation structure had been achieved.XRD and DSC analyses indicated that the crystallinity and supercooling of nanocomposites decreased and the size of the crystallites was also reduced.The intercalation of mortmorillonite into PA66 played a role as a nucleating agent for crystallization of PA66.The addition of MMT could improve the decomposition temperature,storage modulus and glass temperature of PA66 according to TGA and DMA analyses.
中图分类号 TB333
所属栏目
基金项目
收稿日期 2005/8/1
修改稿日期 2005/10/28
网络出版日期
作者单位点击查看
备注慕波(1981-),男,山东烟台人,硕士研究生.
引用该论文: MU Bo,WANG Qi-hua,JIAN Ling-qi,WANG Hong-gang. Preparation and Thermal Properties of PA66/MMT Nanocomposites[J]. Materials for mechancial engineering, 2006, 30(8): 66~68
慕波,王齐华,简令奇,王宏刚. 尼龙66/蒙脱土纳米复合材料的结构和热学性能[J]. 机械工程材料, 2006, 30(8): 66~68
被引情况:
【1】赵国璋, "用于X射线防护的天然橡胶/钨复合材料的制备及性能",机械工程材料 39, 48-53(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】马晓燕,鹿海军,梁国正.累托石/聚丙烯插层纳米复合材料的制备与性能[J].高分子学报,2004,(1):88-92.
【2】Zong Ruowen,Hu Yuan,Wang Shaofeng.Thermogravimetric evaluation of PC/ABS/montmorillonite nanocomposite[J].Polymer Degradation and Stability,2004,83:423-428.
【3】Lan T,Kaviratna P D,Pinnavaia T J.On the nature of polyimide-clay hybrid composites[J].Chem Mater,1994,6:573-575.
【4】Zhang Jinguo,Charles A.Wilkie.Preparation and flammability properties of polyethylene-clay nanocomposites[J].Polymer Degradation and Stability,2003,80:163-169.
【5】Michael Alexandre,Philippe Dubois.Polymer-layered silicate nanocomposites:preparation,properties and uses of a new class of materials[J].Materials Science and Engineering,R:Reports,2000,28(1-2):1-63.
【6】Shen Lu,In Yee Phang,Ling Chen,et al.Nanoindentation and morphological studies on nylon 66 nanocomposites,I:Effect of clay loading[J].Polymer,2004,45:3341-3349.
【7】Liu Xiaohui,Wu Qiuju.Polymorphism in polyamide 66/clay nanocomposites[J].Polymer,2002,43:4967-4972.
【8】Lu Yonglai,Zhang Ying,Zhang Guobao,et al.Influence of thermal processing on the perfection of crystals in polyamide66 and polyamide 66/clay nanocomposites[J].Polymer,2004,45:8999-9009.
【9】Tang Yong,Hu Yuan.Preparation and thermal stability of polypropylene/montmorillonite nanocomposites[J].Polymer Degradation and Stability,2003,82:127-131.
【10】Tony Mcnally,Murphy W Raymond.Polyamide-12 layered silicate nanocomposites by melt blending[J].Polymer,2003,44:2761-2772.
【2】Zong Ruowen,Hu Yuan,Wang Shaofeng.Thermogravimetric evaluation of PC/ABS/montmorillonite nanocomposite[J].Polymer Degradation and Stability,2004,83:423-428.
【3】Lan T,Kaviratna P D,Pinnavaia T J.On the nature of polyimide-clay hybrid composites[J].Chem Mater,1994,6:573-575.
【4】Zhang Jinguo,Charles A.Wilkie.Preparation and flammability properties of polyethylene-clay nanocomposites[J].Polymer Degradation and Stability,2003,80:163-169.
【5】Michael Alexandre,Philippe Dubois.Polymer-layered silicate nanocomposites:preparation,properties and uses of a new class of materials[J].Materials Science and Engineering,R:Reports,2000,28(1-2):1-63.
【6】Shen Lu,In Yee Phang,Ling Chen,et al.Nanoindentation and morphological studies on nylon 66 nanocomposites,I:Effect of clay loading[J].Polymer,2004,45:3341-3349.
【7】Liu Xiaohui,Wu Qiuju.Polymorphism in polyamide 66/clay nanocomposites[J].Polymer,2002,43:4967-4972.
【8】Lu Yonglai,Zhang Ying,Zhang Guobao,et al.Influence of thermal processing on the perfection of crystals in polyamide66 and polyamide 66/clay nanocomposites[J].Polymer,2004,45:8999-9009.
【9】Tang Yong,Hu Yuan.Preparation and thermal stability of polypropylene/montmorillonite nanocomposites[J].Polymer Degradation and Stability,2003,82:127-131.
【10】Tony Mcnally,Murphy W Raymond.Polyamide-12 layered silicate nanocomposites by melt blending[J].Polymer,2003,44:2761-2772.
相关信息