Progress in Research of Metal Melt Infiltration Composites
摘 要
金属熔体浸渗工艺已成为复合材料制备的主要手段之一,对近年来采用金属熔体浸渗工艺制备的新型石墨/铜、碳化硅/铝、碳化硼/铝和碳化钛/镍铝复合材料的制备工艺、材料性能和应用领域及其前景进行了论述.
Abstract
Metal melt infiltration (MMI) process is one of the main methods to synthesize composite materials.This paper introduces some new materials produced by this method,including copper impregnated-graphite,silicon carbide/aluminum,boron carbide/aluminum and titanium carbide/nickel aluminide composites,and especially focuses on the MMI process,mechanical properties and potential application of these new materials.
中图分类号 TB333
所属栏目
基金项目
收稿日期 2005/8/22
修改稿日期 2005/10/20
网络出版日期
作者单位点击查看
备注王铁军(1971-),男,四川攀枝花人,高级工程师,硕士.
引用该论文: WANG Tie-jun,XIONG Ning,ZHOU Wu-ping,QIN Si-gui. Progress in Research of Metal Melt Infiltration Composites[J]. Materials for mechancial engineering, 2006, 30(9): 1~3
王铁军,熊宁,周武平,秦思贵. 新型金属熔体浸渗复合材料的研究进展[J]. 机械工程材料, 2006, 30(9): 1~3
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】吴人洁.复合材料[M].天津:天津大学出版社,2000.
【2】苏君明.火箭喷管多晶石墨材料的应用研究[A].第18届炭、石墨材料学术会议论文集·炭学文集[C].西安:2000.
【3】刘建军,李桂林.影响炭/铜复合材料性能的因素分析[A].第18届炭、石墨材料学术会议论文集·炭学文集[C].西安:2002.
【4】苏君明,陈林泉.石墨渗铜喉衬材料的微观结构与抗热震性能[J].固体火箭技术,2003,26(3):58-61.
【5】王铁军,周武平.电子封装用粉末冶金材料[J].粉末冶金技术,2005,23(2):145-151.
【6】Carl Zweben.New,Ultrahigh-thermal-conductivity packaging materials[A].Packaging & Manufacturing Technology Society[C].2005.
【7】李戈扬,中江秀雄.铝液在Al2O3上润湿性的改善[J].材料工程,2000,(4):11-13.
【8】施忠良,刘俊友.碳化硅颗粒增强的铝基复合材料界面微观结构研究[J].电子显微学报,2002,21(1):52-55.
【9】董盼,汤涛.双连续相SiC/Al复合材料压渗工艺初探[J].合肥工业大学学报,2001,24(2):226-229.
【10】张少卿,崔岩.碳化硅颗粒增强铝基复合材料的无压浸渗反应机理探讨[J].材料工程,2001,(12):8-11.
【11】熊德赣,刘希从.铝碳化硅复合材料T/R组件封装外壳的研制[J].电子元件与材料,2003,22(2):17-19.
【12】孙志杰,吴燕.防弹陶瓷的研究现状与发展趋势[J].宇航材料工艺,2000,(5):10-14.
【13】Halverson,Aleksander J Pyzik,Ilhan A Aksay.Boron-carbide-aluminum and boron-carbide-reactive metal cermets[P].United States Patent:4605440,1986-08-12.
【14】Frage N,Levin L,Frumin N.Manufacturing B4C-(Al,Si) composite materials by metal alloy infiltration[J].J Mater Pro Tech,2003,143-144:486-490.
【15】Ramesh K T,Ravichandran G.Dynamic behavior of a boron carbide-aluminum cermet:Experiments and observations[J].Mech Mater,1990,(10):19-29.
【16】张佐光,钟伟红.武装直升机轻型复合防弹装甲技术[J].航空制造工程,1995,(11):33-36.
【17】张联盟,涂 溶.Ni3Al对TiC的润湿性及Mo添加的影响[J].复合材料学报,1995,12(4):22-29.
【18】Kevin P Plucknet,Paul F Becher.Flexure strength of melt-infiltration-processed titanium carbide/nickel aluminide composites[J].J Am Ceram Soc,1998,81(7):1839-1844.
【19】Yi Pan,Kewei Sun.Preparation of TiC/Ni3Al composites by upward melt infiltration[J].J Mater Technol,2000,16(4):387-392.
【20】Subramanian R,Schneibel J H.FeAl-TiC and FeAl-WC composite-melt infiltration processing,microstructure and mechanical properties[J].Mater Science and Eng,1998,244:103-112.
【2】苏君明.火箭喷管多晶石墨材料的应用研究[A].第18届炭、石墨材料学术会议论文集·炭学文集[C].西安:2000.
【3】刘建军,李桂林.影响炭/铜复合材料性能的因素分析[A].第18届炭、石墨材料学术会议论文集·炭学文集[C].西安:2002.
【4】苏君明,陈林泉.石墨渗铜喉衬材料的微观结构与抗热震性能[J].固体火箭技术,2003,26(3):58-61.
【5】王铁军,周武平.电子封装用粉末冶金材料[J].粉末冶金技术,2005,23(2):145-151.
【6】Carl Zweben.New,Ultrahigh-thermal-conductivity packaging materials[A].Packaging & Manufacturing Technology Society[C].2005.
【7】李戈扬,中江秀雄.铝液在Al2O3上润湿性的改善[J].材料工程,2000,(4):11-13.
【8】施忠良,刘俊友.碳化硅颗粒增强的铝基复合材料界面微观结构研究[J].电子显微学报,2002,21(1):52-55.
【9】董盼,汤涛.双连续相SiC/Al复合材料压渗工艺初探[J].合肥工业大学学报,2001,24(2):226-229.
【10】张少卿,崔岩.碳化硅颗粒增强铝基复合材料的无压浸渗反应机理探讨[J].材料工程,2001,(12):8-11.
【11】熊德赣,刘希从.铝碳化硅复合材料T/R组件封装外壳的研制[J].电子元件与材料,2003,22(2):17-19.
【12】孙志杰,吴燕.防弹陶瓷的研究现状与发展趋势[J].宇航材料工艺,2000,(5):10-14.
【13】Halverson,Aleksander J Pyzik,Ilhan A Aksay.Boron-carbide-aluminum and boron-carbide-reactive metal cermets[P].United States Patent:4605440,1986-08-12.
【14】Frage N,Levin L,Frumin N.Manufacturing B4C-(Al,Si) composite materials by metal alloy infiltration[J].J Mater Pro Tech,2003,143-144:486-490.
【15】Ramesh K T,Ravichandran G.Dynamic behavior of a boron carbide-aluminum cermet:Experiments and observations[J].Mech Mater,1990,(10):19-29.
【16】张佐光,钟伟红.武装直升机轻型复合防弹装甲技术[J].航空制造工程,1995,(11):33-36.
【17】张联盟,涂 溶.Ni3Al对TiC的润湿性及Mo添加的影响[J].复合材料学报,1995,12(4):22-29.
【18】Kevin P Plucknet,Paul F Becher.Flexure strength of melt-infiltration-processed titanium carbide/nickel aluminide composites[J].J Am Ceram Soc,1998,81(7):1839-1844.
【19】Yi Pan,Kewei Sun.Preparation of TiC/Ni3Al composites by upward melt infiltration[J].J Mater Technol,2000,16(4):387-392.
【20】Subramanian R,Schneibel J H.FeAl-TiC and FeAl-WC composite-melt infiltration processing,microstructure and mechanical properties[J].Mater Science and Eng,1998,244:103-112.
相关信息