搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
用相对衰减系数无损表征30Mn2SiV钢的显微组织
          
Nondestructive Characterization of Mixed Microstructure of 30Mn2SiV Steel by Ultrasonic Parameter

摘    要
采用超声波检测技术无损区分材料不同组织状态的研究近年来已成为热点,以经控轧控冷工艺生产的30Mn2SiV非调质D级抽油杆用钢为对象,采用水浸线聚焦检测技术,借助超声波频谱分析方法,以相对衰减系数为无损表征参量,研究了棒材多相混合组织状态与相对衰减系数之间的关系.结果表明:该钢相对衰减系数值分布规律从大到小排列为含大量上贝氏体组织、片状珠光体+铁素体组织、珠光体球化组织.
标    签 超声波检测   相对衰减系数   30Mn2SiV钢   显微组织   nondestructive ultrasonic method   relative attenuation   microstructure   30Mn2SiV steel  
 
Abstract
From both academic and practical points of view,the investigation of different microstructures by nondestructive ultrasonic methods had been a topic of interest recently.In the present work,an experimental immersion beam focus technique had been developed to measure relative attenuation of ultrasonic waves through non-quenched and tempered 30Mn2SiV steel for sucker rod with different mixed microstructures.A relationship between relative attenuation and mixed microstructure of 30Mn2SiV steel for sucker rod was investigated.And the results indicate that the order of ultrasonic relative attenuation in specimens is as follows:upper bainite>lamellar pearlite + ferrite>globular pearlite.

中图分类号 TG115.2

 
  中国光学期刊网论文下载说明


所属栏目

基金项目

收稿日期 2006/3/18

修改稿日期 2006/6/2

网络出版日期

作者单位点击查看

备注杨冰(1979-),女,吉林四平人,硕士研究生.

引用该论文: YANG Bing,LIN Li,ZHAO Jian-qiang,LI Xi-meng. Nondestructive Characterization of Mixed Microstructure of 30Mn2SiV Steel by Ultrasonic Parameter[J]. Materials for mechancial engineering, 2007, 31(3): 40~43
杨冰,林莉,赵建强,李喜孟. 用相对衰减系数无损表征30Mn2SiV钢的显微组织[J]. 机械工程材料, 2007, 31(3): 40~43


被引情况:


【1】李萍,程向梅,李安娜,唐子乔, "304不锈钢敏化程度的超声无损表征",机械工程材料 37, 53-57(2013)



论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】Hakan Gür C,Orkun Tuncer B.Characterization of microstructural phases of steels by sound velocity measurement[J].Materials Characterization,2005,55:160-166.
 
【2】YANG Rui-cheng.Aging behavior descriptions for main steam pipe steels 12Cr1MoV and 12Cr1MoV by Larson-Miller parameter[J].Material Science & Technology,2002,10(4):395-398.
 
【3】Papadakis E P.Ultrasonic attenuation and velocity in AISI/SAE 52100 steel quenched from various temperatures[J].Metal Trans,1970,1:1053-1057.
 
【4】Smith R L,Reynolds W N,Wadley H N G.Ultrasonic attenuation and microstructure in low alloy steels[J].Met Sci,1981,15:554-558.
 
【5】Berger H.Nondestructive characterization of materials[J].Mater Eval,1992,50:299-305.
 
【6】Ahn Bongyoung,Lee Seung Seok.Effect of microstructure of low carbon steels on ultrasonic attenuation[J].IEEE Transaction on Ultrasonics,Ferroelectrics,and Frequency Control,2000,41:620-628.
 
【7】李家伟,陈积懋.无损检测手册[M].北京:机械工业出版社,2002:224-237.
 
【8】苏勇,林维正.用信号分析技术检测材料的声速和衰减[J].建筑材料学报,2001(4):65-69.
 
【9】Weimin Gao,Christ Glorieux,Silvio Elton Kruger.Investigation of the microstructrue of cast iron by laser ultrasonic surface wave spectroscopy[J].Materials Science and Engineering A,2001,313:170-179.
 
【10】罗斯J L.固体中的超声波[M].何存富,吴斌,王秀彦,译.北京:科学出版社,2004.
 
【11】Haines N F,Bell J C,Mclntyre P J.The application of broadband ultrasonic spectroscopy to the study of layered media[J].J Acoust Soc Am,1978,64(6):1645-1651.
 
【12】邹龙江,杨冰,高路斯,等.抽油杆用钢30Mn2SiV拉伸脆断的原因分析[J].机械工程材料,2006,30(9):70-72.
 
相关信息
   标题 相关频次
 抽油杆用钢30Mn2SiV拉伸脆断原因分析
 6
 CFRP复合材料孔隙形貌特征的统计分析
 4
 纵波脉冲回波法和兰姆波法在表征薄层结构中的应用比较
 4
 HIPIB辐照前后Cr2O3陶瓷涂层超声衰减特性研究
 3
 不锈钢管材中弯曲模态导波试验
 3
 超声功率谱特征参数在复合材料孔隙率检测中的应用
 3
 基于超声声速法的陶瓷涂层特性表征
 3
 基于超声声压反射系数相位谱法的热障涂层非均匀性表征
 3
 兰姆波频散曲线的绘制与试验验证
 3
 神经网络在20钢时效组织状态无损识别中的应用
 3
 06Cr19Ni10不锈钢/A283低碳钢扩散焊接接头的显微组织和力学性能
 2
 06Cr20Ni11钢埋弧焊焊缝的显微组织和性能
 2
 1000-3738(2007)02-0009-04
 2
 102钢的显微组织形态与室温力学性能的关系
 2
 10Ni5CrMoV钢MAG焊接接头的显微组织与力学性能
 2
 12Cr13钢预热处理工艺参数优化
 2
 12Cr1MoV钢管在长时服役后组织及拉伸性能的退化
 2
 12Cr1MoV钢过热器爆管的显微组织和力学性能
 2
 13MnNiMoNbR与00Cr19Ni10异种钢焊接接头的组织与性能
 2
 15CrMo钢和12Cr1MoV钢的快速金相制样方法
 2
 16MND5/309L/308L/Z2CND18-12N异种金属焊接件的组织和性能
 2
 16Mn钢链板断裂分析
 2
 16Mo3钢大直径大变形量试制中频弯管的组织与性能
 2
 1Cr17不锈钢表面TIG冷焊重熔和丝材熔敷工艺及改性层的组织和性能
 2
 1Cr18Ni9Ti不锈钢脉冲超窄间隙焊接头的组织及耐腐蚀性能
 2
 2024铝合金电子束焊接接头的显微组织与力学性能
 2
 20Cr1Mo1VTiB钢的连续冷却转变行为
 2
 20CrMnTi齿轮钢棒材控轧控冷工艺的优化
 2
 20MnCr5钢齿轮表面渗碳层的显微组织
 2
 220 kV断路器用弹簧异常开裂失效分析
 2