镀镍石墨粉表面球化及与铜合金基体界面结合的研究
Surface Globuling and Interfacial Combination with Copper Matrix of Graphite Coated with Nickel
摘 要
根据化学镀反应原理,在石墨粉表面镀上金属镍,并对其工艺进行了优化;通过对镀镍石墨粉的高温处理,初步讨论了镍镀层的球化及其对石墨与铜合金基体界面结合的影响.结果表明:在石墨颗粒表面获得连续均匀的镍镀层,提高了石墨粉与铜基体的润湿性,改善了铜基石墨复合材料的界面结合;高温处理时,表面金属镀层有熔融球化的趋势,影响材料的界面结合.
石墨
复合材料
润湿性
界面结合
electroless plating
graphite
composite material
wettability
interfacial combination
Abstract
Surface of graphite particles was plated with nickel according to the reaction theory of electroless plating,and the technology of electroless plating nickel was optimized.Globuling of nickel plating was performed through heat treatment of graphite coated with nickel,and interfacial combination between graphite and copper matrix was studied.The surface of graphite particles was plated with a flat,continuous and uniform nickel plating that increased the wettability and improved the interfacial combination between graphite and copper matrix.The trend of melt globuling of metal plating affected the interfacial combination during high temperature treatment.
中图分类号 TQ153.1 TH117.1
所属栏目
基金项目 合肥市科技局基金资助项目(051141)
收稿日期 2006/6/12
修改稿日期 2006/8/28
网络出版日期
作者单位点击查看
备注杜春宽(1977-),男,黑龙江龙江人,硕士研究生.
引用该论文: DU Chun-kuan,YIN Yan-guo,LIU Kun,ZHENG Zhi-xiang. Surface Globuling and Interfacial Combination with Copper Matrix of Graphite Coated with Nickel[J]. Materials for mechancial engineering, 2007, 31(4): 25～28
杜春宽,尹延国,刘焜,郑治祥. 镀镍石墨粉表面球化及与铜合金基体界面结合的研究[J]. 机械工程材料, 2007, 31(4): 25～28
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王文芳,许少凡,应美芳,等.用镀铜石墨粉制备铜-石墨复合材料[J].机械工程材料,1999,23(2):41-43.
【2】Moustafa S F,El-Badry S A,Sanad A M,et al.Friction and wear of copper-graphite composites made with Cu-coated and uncoated graphite powders[J].Wear,2002(253):699-710.
【3】韩绍昌,徐仲榆.碳/铜复合材料研究进展[J].机械工程材料,1999,23(6):6-8.
【4】黄鑫,王贵青,贺子恺.石墨粉表面镀铜工艺研究[J].机械工程材料,2002,26(11):33-35.
【5】沃尔夫冈·里德尔.化学镀镍[M].罗守福,译.上海:上海交通大学出版社,1996.
【6】翟金坤,黄子勋编译.化学镀镍[M].北京:北京航空学院出版社,1987.
【7】尹周澜,郭淑玲,周建.石墨粉上化学镀镍研究[J].新型碳材料,1998,13(4):46-49.
【8】李国军,黄校先,郭景坤.Al2O3基金属陶瓷界面润湿性的改善[J].材料导报,2001,15(4):33-34.
【9】沃丁柱.复合材料大全[M].北京:化学工业出版社,2000.
【10】Ambier J,Bourda C,Jeannot D,et al.Modification in the microstructure of materials with air break switching at high currents[J].IEEE Trans on CHMT,1991,14(1):153-161.
【11】宋正芳.碳石墨制品的性能及其应用[M].北京:机械工业出版社,1987.
【12】许育东,石敏,刘宁,等.(Ti,Me)(C,N)/Ni的润湿性及其价电子结构[J].复合材料学报,2005,22(4):75-80.
【2】Moustafa S F,El-Badry S A,Sanad A M,et al.Friction and wear of copper-graphite composites made with Cu-coated and uncoated graphite powders[J].Wear,2002(253):699-710.
【3】韩绍昌,徐仲榆.碳/铜复合材料研究进展[J].机械工程材料,1999,23(6):6-8.
【4】黄鑫,王贵青,贺子恺.石墨粉表面镀铜工艺研究[J].机械工程材料,2002,26(11):33-35.
【5】沃尔夫冈·里德尔.化学镀镍[M].罗守福,译.上海:上海交通大学出版社,1996.
【6】翟金坤,黄子勋编译.化学镀镍[M].北京:北京航空学院出版社,1987.
【7】尹周澜,郭淑玲,周建.石墨粉上化学镀镍研究[J].新型碳材料,1998,13(4):46-49.
【8】李国军,黄校先,郭景坤.Al2O3基金属陶瓷界面润湿性的改善[J].材料导报,2001,15(4):33-34.
【9】沃丁柱.复合材料大全[M].北京:化学工业出版社,2000.
【10】Ambier J,Bourda C,Jeannot D,et al.Modification in the microstructure of materials with air break switching at high currents[J].IEEE Trans on CHMT,1991,14(1):153-161.
【11】宋正芳.碳石墨制品的性能及其应用[M].北京:机械工业出版社,1987.
【12】许育东,石敏,刘宁,等.(Ti,Me)(C,N)/Ni的润湿性及其价电子结构[J].复合材料学报,2005,22(4):75-80.
相关信息
