Effect of Vanadium-niobium Microalloying on Properties of Cr-Ni-Mo Heavy-duty Gear Steel
摘 要
对铬-镍-钼系重载齿轮钢进行钒-铌微合金化处理,并对比了微合金化处理前后的淬火与渗碳组织及其性能.结果表明:经过钒-铌微合金化处理后,该钢的奥氏体晶粒得到显著细化:伴随着晶粒的细化,其冲击吸收功得到较大幅度的提高:在渗碳温度范围内长时间保温时不会发生奥氏体晶粒的异常长大:晶粒细化也使其渗碳层的组织和性能得到改善.
Abstract
Cr-Ni-Mo heavy-duty gear steel was microalloyed with vanadium and niobium,and the microstructure after quenching and carburizing as well as mechanical properties before and after microalloying were compared.The austenite grains of the test steel are significantly refined after the microalloying process.The impact energy is also increased with the decrease of the austenite grain size.The vanadium/niobium microalloyed steel do not show abnormal coarsening of austenite grains when it was austenitized in the temperature range of carburization for a long time,and the mechanical properties of the carburizing phase are also improved.
中图分类号 TG142.1
所属栏目
基金项目
收稿日期 2006/7/3
修改稿日期 2006/10/31
网络出版日期
作者单位点击查看
备注张文汉(1977-),男,湖北天门人,硕士研究生.
引用该论文: ZHANG Wen-han,WANG Mao-qiu,SHI Jie,HUI Wei-jun,DONG Han,WU Run. Effect of Vanadium-niobium Microalloying on Properties of Cr-Ni-Mo Heavy-duty Gear Steel[J]. Materials for mechancial engineering, 2007, 31(6): 30~33
张文汉,王毛球,时捷,惠卫军,董瀚,吴润. 钒-铌微合金化对铬-镍-钼系重载齿轮钢性能的影响[J]. 机械工程材料, 2007, 31(6): 30~33
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】杨林,邵亮,乔兵,等.含Nb齿轮钢晶粒度研究[J].汽车工艺与材料,2004(7):5-6.
【2】吴正锡.高强度渗碳齿轮钢17CrNiMo6的研究[J].四川冶金,1993(3):36-39.
【3】Pacheco J L,Krauss G.Microstructure and high bending fatigue strength in carburized steel[J].Journal of Heat Treating,1989,7(2):77-86.
【4】Wise J P,Matlock D K.Bending fatigue of carburized steels:A stastical analysis of process and microstructural parameters[J].SAE Transactions:Journal of Materials & Manufacturing,2000,109:182-191.
【5】Stasko R,Adrian H,Adrian A.Effect of nitrogen and vanadium on austenite grain growth of a low alloy steel[J].Materials Characterization,2006,56(4/5):340-347.
【6】Leap M J,Brown E L.Effect of composition and processing on development of grain coarsening resistance in cold forged and carburized steel[J].Materials Science and Technology,2002,18(9):945-958.
【7】王毛球,董瀚,王琪,等.奥氏体化对3Cr-3Mo-Nb二次硬化钢的组织和力学性能的影响[J].兵器材料科学与工程,2002,25(5):9-13.
【8】项程云.合金结构钢[M].北京:冶金工业出版社,1999:384.
【9】王毛球,董瀚,王琪,等.高强度炮钢的组织和力学性能[J].兵器材料科学与工程,2003,26(2):7-10.
【10】张银花.CrNb低合金热轧轨组织和性能研究[J].铁道学报,2002,24(3):27-31.
【11】Wang M Q,Zhang W H,Shi J,et al.Microstructure and mechanical properties of V-Nb microalloyed steel for heavy duty gear[C]//The 3rd International Conference on Advanced Structural Steels.Korea:Gyeongiu,2006:411-415.
【12】董瀚.超细晶粒钢及其力学性能特征[J].中国冶金,2003(10):26-34.
【2】吴正锡.高强度渗碳齿轮钢17CrNiMo6的研究[J].四川冶金,1993(3):36-39.
【3】Pacheco J L,Krauss G.Microstructure and high bending fatigue strength in carburized steel[J].Journal of Heat Treating,1989,7(2):77-86.
【4】Wise J P,Matlock D K.Bending fatigue of carburized steels:A stastical analysis of process and microstructural parameters[J].SAE Transactions:Journal of Materials & Manufacturing,2000,109:182-191.
【5】Stasko R,Adrian H,Adrian A.Effect of nitrogen and vanadium on austenite grain growth of a low alloy steel[J].Materials Characterization,2006,56(4/5):340-347.
【6】Leap M J,Brown E L.Effect of composition and processing on development of grain coarsening resistance in cold forged and carburized steel[J].Materials Science and Technology,2002,18(9):945-958.
【7】王毛球,董瀚,王琪,等.奥氏体化对3Cr-3Mo-Nb二次硬化钢的组织和力学性能的影响[J].兵器材料科学与工程,2002,25(5):9-13.
【8】项程云.合金结构钢[M].北京:冶金工业出版社,1999:384.
【9】王毛球,董瀚,王琪,等.高强度炮钢的组织和力学性能[J].兵器材料科学与工程,2003,26(2):7-10.
【10】张银花.CrNb低合金热轧轨组织和性能研究[J].铁道学报,2002,24(3):27-31.
【11】Wang M Q,Zhang W H,Shi J,et al.Microstructure and mechanical properties of V-Nb microalloyed steel for heavy duty gear[C]//The 3rd International Conference on Advanced Structural Steels.Korea:Gyeongiu,2006:411-415.
【12】董瀚.超细晶粒钢及其力学性能特征[J].中国冶金,2003(10):26-34.
相关信息