搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
氢对热变形TC4钛合金显微组织的影响
          
Effect of Hydrogen on the Microstructure of Ti-6Al-4V Alloy by Hot Defromation

摘    要
研究了渗氢TC4钛合金热变形后及除氢处理后的显微组织.结果表明:渗氢TC4钛合金组织中的氢化物随氢含量增加逐渐长大:应变速率增加时,亚晶变形增加:除氢后由于动态回复亚晶界变得清晰光滑,亚晶内位错密度降低.
标    签 TC4钛合金   渗氢   热变形   显微组织   TC4 titanium alloy   hydrogenation   hot deformation   microstructure  
 
Abstract
The both microstructures of hot deformation and dehydrogenation of TC4 alloy was researched in this paper.The result shows the hydrides content grows up with the increasing of hydrogen.The deformation of subgrain is increased with the increasing of deformation rate.The subgrain boundary become smoothly and the density of dislocation is decrease in subgrain because of dynamic-recover after dehydrogenation.

中图分类号 N34

 
  中国光学期刊网论文下载说明


所属栏目

基金项目 国家自然科学基金资助项目(50371021)

收稿日期 2006/7/27

修改稿日期 2007/3/26

网络出版日期

作者单位点击查看

备注龚沛(1965-),男,内蒙古呼和浩特人,讲师,硕士.

引用该论文: GONG Pei,SUN Dong-li. Effect of Hydrogen on the Microstructure of Ti-6Al-4V Alloy by Hot Defromation[J]. Materials for mechancial engineering, 2007, 31(6): 69~72
龚沛,孙东立. 氢对热变形TC4钛合金显微组织的影响[J]. 机械工程材料, 2007, 31(6): 69~72


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】杨宝付,张治民,王强,等.TC4合金等温挤压过程的有限元数值模拟[J].热加工工艺,2004(1):44-46.
 
【2】Senkov O N,Froes F H.Thermohydrogen processing of titanium alloys[J].International Journal of Hydrogen Energy,1999,24(6):565-576.
 
【3】Hirofumi Yoshimura,Kin’ichi Kimura,Masayuki Hayashi,et al.Ultra-fine equiaxed grain refinement and improvement of mechanical properties of (α+β) type titanium alloys by hydrogenation[J].Hot Working,Heat Treatment Materials Transactions,JIM,1994,35(4):266-272.
 
【4】Murzinova M A,Mazurski M I,Salishchev A,et al.Application of reversible hydrogen alloying for formation of submicrocrystalline structure in (α+β) titanium alloys[J].International Journal of Hydrogen Energy,1997,22(2/3):201-204.
 
【5】Zhang Y,Zhang S Q.Hydrogenation characteristics of Ti-6Al-4V cast alloy and its microsoftructural modification by hydrogen treatment[J].International Journal of Hydrogen Energy,1997,22(2/3):161-168.
 
【6】Fang Tun-Ying,Wang Wen-Hsiung.Microstructural features of thermochemical processing in a Ti-6Al-4V alloy[J].Materials Chemistry Physics,1988,56:35-47.
 
【7】Kohn D H,Ducheyne P.Microstructural refinement of β-sintered and Ti-6Al-4V porous-coated by temporary alloying with hydrogen[J].Journal of Materials Science,1991(26):534-544.
 
【8】Senkov O N,Jonas J J,Froes F H.Recent advances in the thermohydrogen processing of titanium alloys[J].JOM,1996,21(6):42-47.
 
【9】Shaoqin Zhang,Linruo Zhao.Efect of hydrogen on the superplasticity and microstructure of Ti-6Al-4V alloy[J].Journal of Alloys and Compounds,1995,218:233-236.
 
【10】任大鹏,邹觉生.不锈钢充氚后的微观组织研究[J].机械工程材料,2002,26(8):15-17.
 
【11】Wang Wei E.Thermodynamic evaluation of the titanium-hydrogen system[J].Journal of Alloys and Compounds,1996,238:6-12.
 
【12】丁伟,魏澎,赵国,等.TiHx中H的热释放行为研究[J].核技术,1998,21(10):586-589.
 
相关信息
   标题 相关频次
 2E12铝合金热变形过程中的动态软化机制
 4
 Al-1.04Mg-0.85Si-0.01Cu铝合金的热压缩变形行为
 4
 TC4钛合金表面低压渗氮层的显微组织与耐磨性能
 4
 TC4钛合金厚板潜弧焊接头的显微组织
 4
 电子束选区熔化成形TC4合金的显微组织及硬度
 4
 热变形量对低铬白口铸铁显微组织和冲击性能的影响
 4
 热处理温度对选择性激光熔化TC4钛合金板不同成形面组织和性能的影响
 4
 热挤压对粉末冶金PM-0002镍基高温合金组织及热变形行为的影响
 4
 试样直径对TC4钛合金拉伸性能的影响
 4
 TC4钛合金线性摩擦焊接头的组织与硬度分析
 3
 高效碲化铋基热电材料中热变形诱导的多尺度微结构效应
 3
 激光功率和扫描速度对选区激光熔化成形TC4钛合金组织和性能的影响
 3
 06Cr19Ni10不锈钢/A283低碳钢扩散焊接接头的显微组织和力学性能
 2
 06Cr20Ni11钢埋弧焊焊缝的显微组织和性能
 2
 1000-3738(2007)02-0009-04
 2
 102钢的显微组织形态与室温力学性能的关系
 2
 10Ni5CrMoV钢MAG焊接接头的显微组织与力学性能
 2
 12Cr13钢预热处理工艺参数优化
 2
 12Cr1MoV钢管在长时服役后组织及拉伸性能的退化
 2
 12Cr1MoV钢过热器爆管的显微组织和力学性能
 2
 13MnNiMoNbR与00Cr19Ni10异种钢焊接接头的组织与性能
 2
 15CrMo钢和12Cr1MoV钢的快速金相制样方法
 2
 16MND5/309L/308L/Z2CND18-12N异种金属焊接件的组织和性能
 2
 16Mn钢链板断裂分析
 2
 16Mo3钢大直径大变形量试制中频弯管的组织与性能
 2
 1Cr17不锈钢表面TIG冷焊重熔和丝材熔敷工艺及改性层的组织和性能
 2
 1Cr18Ni9Ti不锈钢脉冲超窄间隙焊接头的组织及耐腐蚀性能
 2
 2024铝合金电子束焊接接头的显微组织与力学性能
 2
 20Cr1Mo1VTiB钢的连续冷却转变行为
 2
 20Cr2Ni4A钢的高温热变形行为及热加工图
 2