Failure Analysis of 2Cr13 Stainless Steel Blade in a Low Pressure Steam Turbine
摘 要
通过断口宏观形态分析、扫描电镜(SEM)微观观察、能谱(EDS)分析和显微组织分析以及常规力学性能测试,对电站汽轮机低压转子2Cr13不锈钢叶片断裂失效模式和失效原因进行了全面的分析,并对开裂机制进行了深入探讨.结果表明:该汽轮机低压转子2Cr13不锈钢叶片的失效模式为腐蚀疲劳破坏,叶片材质较差的内部因素和腐蚀疲劳的工况条件共同作用造成了叶片的断裂失效.
Abstract
The failure mode and causes of low-pressure rotor 2Cr13 stainless steel blades in a power plant steam turbine were analyzed using SEM,EDS,metallographic techniques and mechanical property tests.The fracture characteristics and mechanism of the blades were discussed.The results show that the failure mode is corrosion fatigue which was caused by the synergistic influence of off quality of the raw material and work condition of corrosion fatigue.
中图分类号 TK263.3 TG115.2
所属栏目
基金项目 国家自然科学基金资助项目(50671085)
收稿日期 2006/9/20
修改稿日期 2006/12/22
网络出版日期
作者单位点击查看
备注韩栋(1981- ),男,山东潍坊人,硕士研究生.
引用该论文: HAN Dong,LIU Dao-xin,LIU Shu-tao. Failure Analysis of 2Cr13 Stainless Steel Blade in a Low Pressure Steam Turbine[J]. Materials for mechancial engineering, 2007, 31(7): 45~48
韩栋,刘道新,刘树涛. 汽轮机低压转子2Cr13不锈钢叶片断裂分析[J]. 机械工程材料, 2007, 31(7): 45~48
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】沈宁福.新编金属材料手册[M].北京:科学出版社,2003:161.
【2】孙智,江利,应鹏展.失效分析-基础与应用[M].北京:机械工业出版社,2005:183.
【3】中国机械工程学会热处理学会编.热处理手册(第2卷)[M].北京:机械工业出版社,2005:584.
【4】全国热处理标准化委员会编.金属热处理标准应用手册[M].北京:机械工业出版社,2005:330.
【5】Metals Handbook[M].vol.13,9th ed.Corrosion in fossil fuel power.Nwe York:ASTM International,1987:999.
【6】Goutam Das.Turbine blade failure in a thermal power plant[J].Engineering Failure Analysis,2003,10:85-87.
【7】王仕勤,梅建平.2Cr13汽轮机叶片断裂分析[J].理化检验-物理分册,1997,33(1):36-37.
【8】刘道新.材料的腐蚀与防护[M].西安:西北工业大学出版社,2006:546.
【9】Suresh S.材料的疲劳第2版[M].北京:国防工业出版社,1999:409.
【2】孙智,江利,应鹏展.失效分析-基础与应用[M].北京:机械工业出版社,2005:183.
【3】中国机械工程学会热处理学会编.热处理手册(第2卷)[M].北京:机械工业出版社,2005:584.
【4】全国热处理标准化委员会编.金属热处理标准应用手册[M].北京:机械工业出版社,2005:330.
【5】Metals Handbook[M].vol.13,9th ed.Corrosion in fossil fuel power.Nwe York:ASTM International,1987:999.
【6】Goutam Das.Turbine blade failure in a thermal power plant[J].Engineering Failure Analysis,2003,10:85-87.
【7】王仕勤,梅建平.2Cr13汽轮机叶片断裂分析[J].理化检验-物理分册,1997,33(1):36-37.
【8】刘道新.材料的腐蚀与防护[M].西安:西北工业大学出版社,2006:546.
【9】Suresh S.材料的疲劳第2版[M].北京:国防工业出版社,1999:409.
相关信息