搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
超细TiC粉末制备技术的研究进展
          
Progress in Study of Preparation of Ultrafine TiC Powders

摘    要
对国内外超细TiC粉末的制备技术进行了综述,主要介绍了自蔓延高温合成法、机械合金化法、微波法和低温化学法等的特点及其存在问题,并指出了超细TiC粉末制备技术的发展方向.
标    签 超细TiC粉末   自蔓延高温合成法   机械合金化法   ultrafine TiC powder   self-propagating high-temperature synthesis   mechanical alloying  
 
Abstract
A review on the developing progress of ultrafine TiC powders is presented.The relevant techniques such as self-propagating high-temperature synthesis,mechanical alloying,microwave method and low temperature chemical method,characteristics and existing problems in preparation are summarized.The development trends of preparation of ultrafine TiC powders are pointed out.

中图分类号 TF123.7

 
  中国光学期刊网论文下载说明


所属栏目

基金项目 国家自然科学基金资助项目(50674057)

收稿日期 2006/10/20

修改稿日期 2007/4/5

网络出版日期

作者单位点击查看

备注严永林(1980-),男,安徽潜山人,硕士研究生.

引用该论文: YAN Yong-lin,ZHENG Yong,YU Hai-jun,BU Hai-jian. Progress in Study of Preparation of Ultrafine TiC Powders[J]. Materials for mechancial engineering, 2007, 31(8): 8~3
严永林,郑勇,于海军,卜海建. 超细TiC粉末制备技术的研究进展[J]. 机械工程材料, 2007, 31(8): 8~3


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】El-Eskandarany M S.Synthesis of nanocrystalline titanium carbide alloy powders by mechanical solid state reaction[J].Metallurgical and Materials Transactions,1996,27A(8):2374-2382.
 
【2】Licko T,Figusch V,Puchyova J.Carbothermal reduction and nitriding of TiO2[J].Journal of the European Ceramic Society,1989,5(4):257-265.
 
【3】Koc R,Folmer J S.Carbothermal synthesis of titanium carbide using ultrafine titania powders[J].Journal of Materials Science,1997,32(12):3101-3111.
 
【4】王金淑,周美玲,张久兴,等.自蔓延法制备TiC粉末的研究[J].北京工业大学学报,1998,24(3):29-33.
 
【5】李奎,潘复生,汤爱涛.TiC、TiN、Ti(C、N)粉末制备技术的现状及发展[J].重庆大学学报,2002,25(6):135-138.
 
【6】王为民,傅正义,袁瑞章.TiC纳米晶粉的制备及其特性[J].陶瓷学报,1998,19(2):73-75.
 
【7】张亚萍,鲁玉祥,郭进.球磨环境对机械合金化合成纳米TiC的影响[J].石油大学学报,2005,29(2):136-140.
 
【8】Choi C J.Preparation of ultrafine TiC-Ni cermet powders by mechanical alloying[J].Journal of Materials Processing Technology,2000,104(1):127-132.
 
【9】Zhu Xinkun,Zhao Kunyu,Cheng Baochang,et al.Synthesis of nanocrystalline TiC powder by mechanical alloying[J].Materials Science and Engineering C,2001,C16(1/2):103-105.
 
【10】朱心昆,赵昆渝,程抱昌,等.在不同球磨机上合成TiC粉末的研究[J].昆明理工大学学报,2000,25(6):57-59.
 
【11】Lohse B H,Calka A,Wexler D.Effect of starting composition on the synthesis of nanocrystalline TiC during milling of titanium and carbon[J].Journal of Alloys and Compounds,2005,394(1/2):148-151.
 
【12】Hassine N A,Binner J G P,Cross T E.Synthesis of refractory metal carbide powders via microwave carbothermal Reduction[J].Int J of Refractory Metals & Hard Materials,1995,13(6):353-358.
 
【13】胡晓力,刘 阳,尹 虹,等.微波合成TiC的研究[J].中国陶瓷工业,2002,9(1):12-15.
 
【14】Alexandrescu R,Borsella E,Botti S,et al.Synthesis of TiC and SiC/TiC nanocrystalline powder by gas-phase laser-induced reaction[J].Journal of Materials Science,1997,32(21):5629-5635.
 
【15】Tong L,Reddy R G.Synthesis of titanium carbide nano-powders by thermal plasma[J].Scripta Materialia,2005,52(12):1253-1258.
 
【16】贾丽改,熊代余.冲击波方法合成TiC机理的研究[J].有色金属,2001,53(4):1-3.
 
【17】Feng Xin,Bai Yujun,Lu Bo,et al.Easy synthesis of TiC nanocrystallite[J].Journal of Crystal Growth,2004,264(1/3):316-319.
 
【18】Lu Qingyi,Hu Junqing,Tang Kaibin,et al.The co-reduction route to TiC nanocrystallites at low temperature[J].Chemical Physics Letters,1999,314(1/2):37-39.
 
【19】Hu Junqing,Lu Qingyi,Tang Kaibin,et al.A new reduction-carburization route to nanocrystalline TiC[J]. Chem Lett,2000(5):474-475.
 
【20】Gu Yunle,Chen Luyang,Li Zhefeng,et al.A simple protocol for bulk synthesis of TiC hollow spheres from carbon nanotubes[J].Carbon,2004,42(1):235-238.
 
【21】Lee D W,Alexandrovskii S V,Kim B K.Novel synthesis of substoichiometric ultrafine titanium carbide[J].Materials Letters,2004,58(9):1471-1474.
 
【22】Hsu M S,Meyers M A,Berkowitz A.Synthesis of nanocrystalline titanium carbide by spark erosion[J].Scripta Metallurgical of Materialia,1995,32(6):805-808.
 
相关信息
   标题 相关频次
 功能梯度硬质合金与金属陶瓷制备技术的研究进展
 4
 烧结工艺和碳加入量对Mo2FeB2基金属陶瓷显微组织和力学性能的影响
 4
 低活化铁素体/马氏体钢原奥氏体晶界显示技术探讨
 2
 钒添加量对Mo2FeB2基金属陶瓷显微组织和力学性能的影响
 2
 粉末冶金工艺制备不锈钢的研究进展
 2
 热压烧结制备高密度钨铜合金
 2
 预烧温度对纳米复合Ti(C,N)基金属陶瓷组织和性能的影响
 2
 CoCrFeNiWx高熵合金黏结剂对WC硬质合金显微组织和力学性能的影响
 1
 TiAl基合金的制备及其摩擦磨损性能
 1
 超细晶高氮奥氏体不锈钢的制备及其性能
 1
 高能球磨制备铜/碳复合粉末及其静压固化
 1
 机械合金化法制备57.6Ag-22.4Cu-10.5In-9.5Sn合金粉末及其性能
 1
 机械合金化法制备Fe0.95Co0.05Si2材料及其热电性能
 1
 机械合金化法制备Mg55Ni35Si10非晶合金粉体
 1
 机械合金化合成TiB2/Fe3Al纳米复合粉体
 1
 机械合金化结合冷压烧结工艺制备Al-20%Sn合金
 1
 机械合金化结合冷压烧结制备铜-锆合金的组织与性能
 1
 机械合金化钛、锡、碳混合粉体中锡晶须的形成机理
 1
 机械合金化-退火法制备两相区铝钌合金粉
 1
 机械合金化制备Al-12%Sn合金的显微组织与耐磨性能
 1
 机械合金化制备CoCrFeNiTiCuMoxVx高熵合金粉末的显微组织
 1
 机械合金化制备FeNbVB纳米晶粉末的研究
 1
 机械合金化制备非晶态Ti2Ni合金及其储氢性能
 1
 机械合金化制备纳米晶铁-铜合金粉体
 1
 锰粉在水溶液中球磨生成相的研究
 1
 内窥涡流一体化综合检测仪研制及在某航空发动机上的应用
 1
 纳米晶Cu-Si合金的抗氧化性能
 1
 镍在机械合金化制备WC粉体中的加速作用
 1
 球磨时间和烧结温度对烧结制备钼-铜合金性能的影响
 1
 三元层状化合物Ti2SC的制备及其力学性能
 1