搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
一种短切碳纤维增强塑料强度的预测方法
          
A Method of Strength Forecast on the Plastic Reinforced by Short Carbon Fibers

摘    要
高性能纤维增强的先进复合材料中,短切碳纤维增强塑料因在性能上的多面性及较低的制作成本而极具吸引力.综合前人的研究成果推导了短纤维增强复合材料的强度混合法则公式,并用纤维长度效应来修正短纤维复合材料中的轴向应力分布的不均匀性,建立模型来正确估计各种参数对强度的影响规律.以短切碳纤维增强PTFE复合材料为例说明强度预测的正确性,为新材料的应用及新型结构的设计提供了依据.
标    签 复合材料   短纤维   强度预测   composite   short fiber   strength forecast  
 
Abstract
Among the advanced composites reinforced by high-performance fibers,the plastic reinforced by short carbon fibers is remarkable by its variety of performance and lower cost.By synthesizing the preceding productions,the strength rule of mixture of short fiber reinforced composite is educed,and the modified formula is obtained by using the length coefficient to correct the asymmetry of stress distribution in material.The math model is established to estimate the influence disciplinarian on strength of parameters.By taking carbon fiber reinforced PTFE composite as the example,the strength forecast method is explained,and it will provide the reference to new material usage and new structure design.

中图分类号 TQ325.2

 
  中国光学期刊网论文下载说明


所属栏目

基金项目 河南省06年杰出人才创新基金资助项目(0621001600)

收稿日期 2006/12/13

修改稿日期 2007/8/9

网络出版日期

作者单位点击查看

备注孙爱芳(1966-),女,河南淇县人,副教授,博士.

引用该论文: SUN Ai-fang,LI Hong-de,LIU Min-shan,DONG Qi-wu. A Method of Strength Forecast on the Plastic Reinforced by Short Carbon Fibers[J]. Materials for mechancial engineering, 2007, 31(9): 7~10
孙爱芳,李宏德,刘敏珊,董其伍. 一种短切碳纤维增强塑料强度的预测方法[J]. 机械工程材料, 2007, 31(9): 7~10


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】杨桂,敖大新.编织结构复合材料制作、工艺及工业实践[M].北京:科学出版社,1999.
 
【2】Shelestova V A,Serafimovich V V,Grakovich P N.The effect of the size of carbon fibers on the physicomechanical properties of fluvis composites[J].Mechanics of Composite Materials,2002,38(2):125-131.
 
【3】Halpin J S,Tsai S W.Effects of environmental factors on composite materials[J].AFML-TR,1969(67):423-426.
 
【4】殷勇.聚四氟乙烯复合材料及其接头的设计理论及应用研究[D].南京工业大学,2002.
 
【5】宋焕成,赵时熙.聚合物基复合材料[M].北京:国防工业出版社,1986.
 
【6】曾庆敦.复合材料的细观破坏机制与强度[M].北京:科学出版社,2002.
 
【7】Bowyer W H,Bader M G.On the reinforcement of thermoplastics by imperfectly aligned discontinuous fibers[J].J Mater Sci,1972(7):1315-1318.
 
【8】Curtis P T,Bader M G,Bailey J E.The stiffness and strength of a polyamide thermoplastic reinforced with glass and carbon fibers[J].J Mater Sci,1978,13:377-380.
 
【9】Zhu Y T,Zong G,Manthiram A,et al.Strength analysis of random short-fibre-reinforced metal matrix composite materials[J].J Mater Sci,1994(29):6281-6286.
 
【10】肖翠蓉,唐羽章.复合材料工艺学[M].北京:国防科技大学出版社,1991.
 
【11】贺福,王贸章.碳纤维及其复合材料[M].北京:科学出版社,1995.
 
【12】Grakovich P N,Shelestova V A.Plasma-chemical modification of carbon fibers as an efficient method of regulating properties of PTFE-based composite materials[J].Science China,Ser.A,2001,44:292-296.
 
【13】Shelestova V A,Serafimovich V V,Grakovich P N.The effect of the size of carbon fibers on the physicomechanical properties of fluvis composites[J].Mechanics of Composite Materials,2002,38(2):125-131.
 
相关信息
   标题 相关频次
 耐腐蚀换热器用聚四氟乙烯的改性与应用现状
 8
 基于分量磁通的表面缺陷无损检测技术研究
 4
 C/SiC复合材料拉伸过程的声发射研究
 2
 Ca-α/β-Sialon结合刚玉复合材料的力学性能
 2
 MGF/PLA复合材料的制备及性能
 2
 MoS2、CdO及聚全氟乙丙烯填充改性聚四氟乙烯
 2
 PP-g-MAH改性SGF+POE/FPP复合材料的制备及性能
 2
 Si3N4p-SiCw/MoSi2复合材料的强韧化效果与机制
 2
 SiCf/Ti-6Al-4V复合材料的界面反应及其影响
 2
 SiCP/6061Al复合材料高温单轴拉伸时相关棘轮行为的细观本构模型
 2
 SiC颗粒增强铝基复合材料的摩擦磨损性能
 2
 T300/648复合材料的湿热老化行为
 2
 T700和T300碳纤维增强环氧树脂基复合材料耐湿热老化性能的对比
 2
 TiB2/Al复合材料喷丸后微区残余应力的有限元模拟
 2
 YANG XiaoLin,LV BoPing,XIAN MingLe
 2
 ZrO2与HA复合粉体的烧结行为
 2
 包覆镍CNTs/AM60复合材料铸态显微组织与力学性能
 2
 包覆镍的碳纳米管增强AZ91镁基复合材料的显微组织与力学性能
 2
 变厚度复合材料结构超声反射法成像的缺陷识别与定量表征
 2
 表面处理方法对剑麻纤维/酚醛树脂复合材料性能的影响
 2
 波音737飞机发动机反推装置内侧壁板复合材料的无损检测
 2
 玻璃纤维增强环氧树脂基复合材料在温湿和紫外辐照环境中的老化行为
 2
 残余热应力对复合材料双面胶接含裂纹铝合金板修复结构疲劳寿命的影响
 2
 层压结构复合材料的激光剪切散斑检测
 2
 长脉冲红外无损检测的图像增强技术
 2
 电化学阻抗法研究土壤模拟溶液中CFRP/碳钢体系的腐蚀行为
 2
 多伦多大学研究人员在SLA 3D打印中测试短纤维复合材料
 2
 芳纶纤维增强尼龙6复合材料的制备与性能
 2
 芳纶毡体/阻尼弹性薄膜复合材料的吸声隔声性能
 2
 放电等离子烧结制备M42/45钢双金属复合材料及界面形成机理
 2