Cause Analyses on Fracture of Absorber Spline Outer Canister for Oil Drilling Stem
摘 要
为查明某油田断裂的石油钻柱减震器花键体外筒的断裂原因,对其断口进行了宏观和微观分析,对断裂的花键体外筒材质进行了分析,对钻柱减震器的受力状态和主要结构进行了分析.结果表明:花键体外筒断裂属于早期疲劳破坏;断裂的原因主要是材料韧性不足、结构不合理导致应力集中.建议提高花键体外筒材料韧性,对花键体外筒断裂部位的结构进行改进.
Abstract
Visual and microcosmic analyses on the fracture of absorber spline outer canister for oil drilling stem (spline outer canister for short) were performed.The material quality stress state and main configuration of the absorber were analyzed.It is indicated that the breakdown of the spline outer canister was fatigue fracture,and the cause of fracture was related to insufficient material toughness and inconsequential configuration with stress concentration.It is suggested that material toughness of spline outer canister should be enhanced,and the configuration at broken position should be improved.
中图分类号 TG115
所属栏目
基金项目
收稿日期 2007/4/18
修改稿日期 2007/6/10
网络出版日期
作者单位点击查看
备注吕拴录(1957-),男,陕西宝鸡人,教授级高级工程师.
引用该论文: Lv Shuan-lu,GAO Lin,CHI Jun,HAN Qi-ming,ZHANG Xin-cheng,GUO Hai-qing,LIU Peng. Cause Analyses on Fracture of Absorber Spline Outer Canister for Oil Drilling Stem[J]. Materials for mechancial engineering, 2008, 32(2): 71~73
吕拴录,高林,迟军,韩启明,张新成,郭海清,刘鹏. 石油钻柱减震器花键体外筒断裂原因分析[J]. 机械工程材料, 2008, 32(2): 71~73
被引情况:
【1】吕拴录,倪渊诠,杨成新,韩勇,薛继军,宋顺平,王举堂, "某油田钻具失效统计分析",理化检验-物理分册 48, 414-418(2012)
【2】滕学清,吕拴录,周理志,季晓红,饶文艺,李金凤,申昭熙,李磊,耿海龙,杨绍龙, "超级13Cr马氏体不锈钢油管表面缺陷原因分析",理化检验-物理分册 50, 67-70(2014)
【3】吕拴录,姬丙寅,骆发前,康延军,张琦,冯少波,李金凤, "139.7mm加重钻杆外螺纹接头断裂原因分析",机械工程材料 33, 99-102(2009)
【4】吕拴录,骆发前,周 杰,卢 强,苏建文,迟 军,杨成新,王中胜, "钻铤断裂原因分析",理化检验-物理分册 45, 309-311(2009)
【5】吕拴录,龚建文,卢强,迟军,许峰,张国正,张春婉, "提升短节外螺纹接头断裂原因分析",机械工程材料 35, 86-88(2011)
【6】聂采军,吕拴录,袁鹏斌,谢又新,邝现任,马红英,盛树彬, "S135钻杆管体断裂原因分析",腐蚀与防护 31, 820-822(2010)
【7】吕拴录,张宏,许峰,历建爱,乐法国,康相千, "石油钻铤断裂原因分析",机械工程材料 34, 80-82(2010)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】吕拴录,李鹤林.V150套管接箍破裂原因分析[J].理化检验,2005,41(增刊):285-290.
【2】吕拴录.随钻震击器冲管体断裂原因分析[J].石油钻采工艺,1991(10):44-47.
【2】吕拴录.随钻震击器冲管体断裂原因分析[J].石油钻采工艺,1991(10):44-47.
相关信息