Analysis of Pore Structure for Ultra-light Porous Metals by X-ray Tomography
摘 要
利用X射线断层扫描技术获得了超轻多孔铝试样的任意截面重构图像,通过对该图像的分析实现了对多孔铝试样孔结构的描述,并得到了重构横截面的面孔隙率.结果表明:超轻多孔铝试样孔结构描述新方法与传统剖开试样分析方法相比,可以获得相同的孔结构分析结果,并具有非接触、非破坏和提高效率的特点.
Abstract
X-ray tomography has been used to obtain the arbitrary shape images of ultra-light porous Al alloy.By analyzing the images,the pore structure of ultra-light porous Al alloy can be described,and porosity ratio of the reconstructed section plane can be calculated.Experiments indicate that,compared with the traditional analysis methods by cutting the test sample,the new analysis methods are able to get the same analysis result as the traditional one without any contact and damage of the test sample and with increased efficiency.
中图分类号 TG115.22
所属栏目
基金项目 国家重点基础研究资助项目(2006CB601201);国家自然科学基金重点资助项目(50231010)
收稿日期 2007/5/17
修改稿日期 2007/7/6
网络出版日期
作者单位点击查看
备注施国栋(1980-),男,江苏东台人,硕士研究生.
引用该论文: SHI Guo-dong,HE De-ping,ZHANG Yong-ming,HE Si-yuan. Analysis of Pore Structure for Ultra-light Porous Metals by X-ray Tomography[J]. Materials for mechancial engineering, 2008, 32(3): 13~15
施国栋,何德坪,张勇明,何思渊. 超轻多孔金属孔结构的X射线断层扫描分析[J]. 机械工程材料, 2008, 32(3): 13~15
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Ashby M F,Lu T J.Metal foams:a survey[J].Science in China,Series B,2003,46(6):521-532.
【2】Ashby M F,Evans A G.Metal foams:a design guide[M].Boston:B-H press,2000:1-5.
【3】吴照金,何德坪.泡沫铝凝固过程中孔隙率的变化[J].科学通报,2000,45(8):829-835.
【4】吴照金,何德坪.泡沫Al孔结构的影响因素[J].材料研究学报,2000,14(3):277-282.
【5】宋振伦.铝熔体泡沫化过程中孔结构的控制[J].铸造,1997(4):9-11.
【6】何德坪,郑明军.闭孔泡沫铝合金的制备方法:中国,1381606[P].2002-11-27.
【2】Ashby M F,Evans A G.Metal foams:a design guide[M].Boston:B-H press,2000:1-5.
【3】吴照金,何德坪.泡沫铝凝固过程中孔隙率的变化[J].科学通报,2000,45(8):829-835.
【4】吴照金,何德坪.泡沫Al孔结构的影响因素[J].材料研究学报,2000,14(3):277-282.
【5】宋振伦.铝熔体泡沫化过程中孔结构的控制[J].铸造,1997(4):9-11.
【6】何德坪,郑明军.闭孔泡沫铝合金的制备方法:中国,1381606[P].2002-11-27.
相关信息