Build-up Welding on T91 Steel Rotor of Ultra-supercritical Steam Turbine
摘 要
针对汽轮机转子在运行过程中发生的不正常磨损,采用2CrMo焊丝在选定的工艺参数下对汽轮机转子材料T91钢进行埋弧堆焊试验,研究了堆焊层化学成分对堆焊层组织和性能的影响.结果表明:对T91钢采用埋弧堆焊进行修复,其堆焊层综合力学性能均优于母材性能;同时发现当堆焊层铬含量在2%左右时,其抗磨损性能大大提高.
Abstract
Submerged arc welding tests on T91 steel being used in the turbine rotor have been done to solve the problem of abnormal wear of the turbine rotor during operation.T91 steel was welded by the method of submerged arc build-up welding using 2CrMo wire and certain welding parameters.The effects of chemical composition on microstructure and performance of the overlay were studied through a series of mechanical performance tests.The results show that the mechanical properties of the overlay were superior to those of the base material by using the submerged arc build-up welding.And the wear resistance of the cladding layer was greatly improved when the component of Cr in the overlay was around 2%.
中图分类号 TG142.73 TG445
所属栏目
基金项目
收稿日期 2007/5/29
修改稿日期 2007/8/28
网络出版日期
作者单位点击查看
备注张振宇(1983-),男,辽宁抚顺人,硕士研究生.
引用该论文: ZHANG Zhen-yu,LU Feng-gui,LU Bin-feng,YAO Shun. Build-up Welding on T91 Steel Rotor of Ultra-supercritical Steam Turbine[J]. Materials for mechancial engineering, 2008, 32(4): 10~13
张振宇,芦凤桂,陆斌锋,姚舜. 超-超临界汽轮机转子材料T91钢的堆焊修复[J]. 机械工程材料, 2008, 32(4): 10~13
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】黄瓯,阳虹,彭泽瑛.我国超超临界汽轮机的发展方向[J].热力透平,2004,33(1):1-7.
【2】王则灵.T91/P91钢的焊接工艺[J].焊接,2005(12):29-33.
【3】任岚明,张志刚.T91/P91钢焊接性能分析[J].吉林电力,2002(8):54-56.
【2】王则灵.T91/P91钢的焊接工艺[J].焊接,2005(12):29-33.
【3】任岚明,张志刚.T91/P91钢焊接性能分析[J].吉林电力,2002(8):54-56.
相关信息