搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
Ag/YBa2Cu3O7-δ自润滑复合材料的力学及摩擦性能
          
Mechanical and Tribological Properties of Ag/YBa2Cu3O7-δ Self-lubricating Composites

摘    要
利用粉末冶金法制备了组织均匀的Ag/YBa2Cu3O7-δ(YBCO)自润滑复合材料,采用XRD和SEM对其物相组成和显微结构进行了表征,分析了银含量对复合材料显微组织、力学性能和摩擦性能的影响.结果表明:常温常压下,当银质量分数为10%时,复合材料的摩擦性能最好,随银含量增加复合材料硬度减小,断裂韧度增大;真空条件下,复合材料的摩擦因数随银含量的增加而降低,且基本不随滑动速度的变化而变化;当温度降低到超导体的超导转变温度时,YBCO的摩擦因数急剧降低.
标    签 自润滑材料   断裂韧度   摩擦   超导转变   self-lubricating composite   fracture toughness   friction   superconducting transition  
 
Abstract
Ag/YBa2Cu3O7-δ (YBCO) self-lubricating composites with uniform and compact structure were prepared by powder metallurgy method.The phase composition and microstructure was studied by XRD and SEM.The effects of Ag content on the microstructure evolution and related mechanical and tribological properties of the composites were studied.The results showed that at normal temperature and pressure,when Ag content was 10wt.%,the composite had the best tribological properties.With the increase of Ag content,hardness of the composties decreased and fracture toughness increased.Under vacuum condition,the friction coefficient of the composites reduced with the increase of Ag content,and didnt change with the sliding velocity.When the temperature was lowered to below superconducting transition temperature of the superconductor,the friction coefficient decreased sharply.

中图分类号 TB33

 
  中国光学期刊网论文下载说明


所属栏目 材料性能及其应用

基金项目

收稿日期 2007/10/12

修改稿日期 2008/1/21

网络出版日期

作者单位点击查看

备注丁巧党(1982-),女,江苏姜堰人,硕士研究生.

引用该论文: DING Qiao-dang,LI Chang-sheng,DONG Li-rong. Mechanical and Tribological Properties of Ag/YBa2Cu3O7-δ Self-lubricating Composites[J]. Materials for mechancial engineering, 2008, 32(10): 60~62
丁巧党,李长生,董丽荣. Ag/YBa2Cu3O7-δ自润滑复合材料的力学及摩擦性能[J]. 机械工程材料, 2008, 32(10): 60~62


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】孙荣禄,孙树文,郭立新,等.固体润滑技术在空间机械中的应用[J].宇航材料工艺,1999,29(1):17-22.
 
【2】Dayo A,Alnasrallah,Krim J.Superconductivity-dependent sliding friction[J].Physical Review Letters,1998,80(8):1690-1693.
 
【3】Mason B L,Winder S M,Krim J.On the current status of quartz crystal microbalance studies of superconductivity-dependent sliding friction[J].Tribology Letters,2001,10(1/2):59-65.
 
【4】Kuleba V I,Ostrovskaya Ye L,Pustovalov V V.Effect of superconducting transition on tribological properties of materials[J].Tribology International,2001,34:237-246.
 
【5】梅田一徳.セラミックスの高温润滑と自己润滑性セラミックスの開発に関する基礎的研究[D].豊橋:豊橋技術科学大学,1998.
 
【6】Joo J,Kim J.-G,Nah W.Improvement of mechanical properties of YBCO-Ag composite superconductors made by mixing with metallic Ag powder and AgNO3 solution[J].Superconductor Science & Technology,1998,11(7):645-649.
 
【7】Jinho Joo,Seung-Boo Jung,Wansoo Nah,et al.Effects of silver additions on the mechanical properties and resistance to thermal shock of YBa2Cu3O7-δ superconductors[J].Cryogenics,1999,39:107-113.
 
相关信息
   标题 相关频次
 磁控溅射MoS2/Ni复合膜的制备及其摩擦性能
 4
 镍-铬基自润滑复合材料的制备及性能
 4
 20CrNi2Mo钢制齿轮表面点坑状缺陷产生原因分析
 2
 4333M4超高压反应管的断裂韧度
 2
 Fe-1.6%Si无取向硅钢的热变形与相变规律
 2
 MoS2/Ni复合膜的微结构与摩擦学性能
 2
 MoSe2纳米片的制备及其摩擦性能
 2
 NbSe2纳米颗粒的合成及减摩性能
 2
 Ni-34%Cu-3.5%C合金的组织及性能
 2
 Ni-Mo黏结剂含量对放电等离子烧结TiC0.7N0.3基金属陶瓷力学性能的影响
 2
 泵头体高强钢材料的力学性能
 2
 常用压力容器钢断裂行为研究
 2
 冲击功与断裂韧度经验关系式对Q345R钢的适用性
 2
 低碳合金钢及焊接接头断裂韧度的温度效应
 2
 断裂韧度合成标准不确定度评定及影响因素探讨
 2
 发电机定子线棒空心水冷导线断裂原因分析
 2
 反应堆压力容器用钢断裂韧度的表征方法及其统计模型
 2
 高强度X140套管钢断裂韧度与试样厚度的关系
 2
 锆合金中氢化物的微观力学性能
 2
 固相烧结合成WSe2纳米棒的微观形貌及摩擦学性能
 2
 海管焊接接头全壁厚裂纹尖端张开位移试验
 2
 回火温度对35CrMo钢显微组织和力学性能的影响
 2
 基于数字图像相关技术的裂纹扩展测量
 2
 激光熔覆制备纳米陶瓷涂层的研究进展
 2
 金属材料断裂韧度测量不确定度的评定
 2
 金属塑性成型过程中摩擦声发射信号特征
 2
 离子束辅助磁控溅射沉积铬-铜-氮薄膜的结构与性能
 2
 利用铝合金疲劳裂纹扩展速率预测其断裂韧度
 2
 模板法合成CuS超长微米线及其表征
 2
 某车辆差速器行星齿轮早期断裂原因
 2