搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
复配增稠剂对中性墨水流变性能的影响
          
Rheological Properties of Gel Ink with Composite Thickening Agents

摘    要
以黄原胶和碱溶胀丙烯酸复配为增稠剂,制备了颜料炭黑中性墨水,研究了增稠剂的复配比例和中性墨水的制备温度对中性墨水流变性能的影响.结果表明:制备的中性墨水具有剪切变稀的非牛顿流体特征,两种增稠剂的复配会产生协同效应;中性墨水的颜料粒径和书写性能易受制备温度的影响,较适宜的中性墨水制备温度为40 ℃;研制的中性墨水的性能指标与国外同类产品相当.
标    签 中性墨水   流变性能   黄原胶   碱溶胀丙烯酸   gel ink   rheological property   xanthan   acrylic emulsion  
 
Abstract
The concoction of xanthan and acrylic emulsion was selected as thickening agents to prepare the gel ink with carbon black as pigment.The effects of the dosage of thickening agents and preparing temperature on the rheological properties of the gel ink were investigated.The results show that such composite thickening agents had a synergistic effect on the rheological properties of the ink.The gel ink prepared by composite thickening agents exhibited as non-Newtonian shear thinning fluids behavior.The particle size and writing performance of the gel ink were influenced by the preparing temperature.The optimization temperature for the gel ink preparation was 40 ℃.The properties of the prepared gel ink were matched to those of the imported ink products.

中图分类号 TQ630.6

 
  中国光学期刊网论文下载说明


所属栏目 材料性能及其应用

基金项目

收稿日期 2008/3/12

修改稿日期 2008/3/4

网络出版日期

作者单位点击查看

备注浦玉(1983-),女,上海人,硕士研究生.

引用该论文: PU Yu,CHEN Ai-ping,QIAN Ji-jun,LIU Zhong-xin,FENG Zheng-yu. Rheological Properties of Gel Ink with Composite Thickening Agents[J]. Materials for mechancial engineering, 2009, 33(3): 72~75
浦玉,陈爱平,钱纪军,刘众鑫,冯征宇. 复配增稠剂对中性墨水流变性能的影响[J]. 机械工程材料, 2009, 33(3): 72~75


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】包友根,冯征宇,浦玉,等.用系统工程的方法研制中性笔墨水[J].中国制笔,2006(4):13-14.
 
【2】冯征宇,陈爱平,钱军,等.中性墨水用碳黑色浆的分散稳定性研究[J].过程工程学报,2007,7(4):796-801.
 
【3】李国兴,邹玲玲,张学俊.中性墨水研制的技术趋向[J].中国制笔,2005(2):15-17.
 
【4】刘宝珠.浅谈中性笔用墨水的研究与发展[J].中国制笔,2003(3):43-46.
 
【5】MARTíNEZ L P,TECANTE A.Steady and oscillatory shear behavior of fluid gels formed by binary mixtures of xanthan and gellan[J].Food Hydrocolloids,2004,18(3):471-481.
 
【6】MANDALA I G,SAVVAS T P,KOSTAROPOULOS A E.Xanthan and locust bean gum influence on the rheology and structure of a white model-sauce[J].Journal of Food Engineering,2004,64(3):335-342.
 
【7】周煜竣,张黎明.海藻酸钠/明胶混合水溶液的流变性能[J].胶体与聚合物,2005,23(4):12-13,17.
 
【8】贺丹,邬应龙.魔芋-黄原胶复合凝胶溶胀性能的研究[J].现代食品科技,2006,22(3):79-81.
 
【9】宮本勝.水性インキ組成物:日本,JP2004346134A[P].2004-12-09.
 
【10】上田聡,阿部伸哉.水性ボ-ルペン用黒色インキ組成物及び水性ボ-ルペン:日本,JP2006160793A[P].2006-06-22.
 
【11】浦玉,陈爱平,冯征宇,等.一种颜料碳黑中性笔墨水及其制备方法:中国,CN1865364A[P].2006-11-22.
 
【12】QB/T 2625-2003.中性墨水笔和笔芯[S].
 
【13】刘金刚.涂料流变学性能--实用化的流变学[J].上海造纸,2004(3):36-40.
 
【14】李里特.食品物性学[M].北京:中国农业出版社,1998:24-25.
 
【15】何东保,黎丽华.阳离子瓜尔胶与黄原胶的凝胶化性能研究[J].武汉大学学报,2003,49(2):197-200.
 
【16】赵向阳,张洁,尤源.钻井液黄原胶胶液的流变特性研究[J].天然气工业,2003,27(3):72-74.
 
相关信息
   标题 相关频次
 高纯球形硅微粉及气相白炭黑含量对剪切增稠液流变性能的影响
 2
 核壳微粒型磁性液体的制备及其流变性能
 2
 凝胶注模成型和机械发泡工艺制备多孔硅酸锆陶瓷的显微结构和抗压性能
 2
 TiH2粉注射成形用新型粘结剂的研制及其性能
 1
 氨水挥发法制备氮掺杂TiO2纳米管及表征
 1
 硅油基磁流变液的制备及其特性
 1
 赛隆陶瓷注射成型喂料的流变性能
 1
 微波密闭增压浸提柑桔园土壤中水溶态硼
 1
 中密度钨-镍-铁粉末注射成形喂料的流变性能与流动本构模型
 1