Current Carrying Friction and Wear Behaviors of Copper-10% Graphite Alloy
摘 要
为提高铜基合金的载流摩擦磨损性能,采用粉末冶金方法制备了含10%石墨的铜基合金,并在自制的销盘式载流摩擦磨损试验机上进行了不同电流和滑动速度下的摩擦磨损试验.结果表明:与不含石墨的铜合金相比较,在不同电流和滑动速度下,加入10%石墨铜合金的摩擦因数和磨损率均降低,耐磨性能明显提高,摩擦因数稳定.
Abstract
In order to improve the current carrying tribological properties of copper based alloys,copper based alloy with 10% graphite was prepared by powder metallurgy method. By using a self-made pin-disk tester,the tribological behaviors of the copper alloys were investigated under different current and electrical sliding condition. The results indicate that the friction coefficient and wear rates of the Cu-10% graphite alloy were decreased at different sliding speeds and currents compared with copper base alloy without graphite,and the wear resistance increased obviously. The friction coefficient was steady.
中图分类号 TH117.3
所属栏目 试验研究
基金项目 国家自然科学基金资助项目(50775066);国家“973”计划资助项目(2007CB607603)
收稿日期 2008/4/9
修改稿日期 2008/10/20
网络出版日期
作者单位点击查看
备注上官宝(1963-),男,河南南阳人,博士研究生.
引用该论文: SHANGGUAN Bao,ZHANG Yong-zhen,XING Jian-dong,SUN Le-min,QIU Ming,NIU Yong-ping. Current Carrying Friction and Wear Behaviors of Copper-10% Graphite Alloy[J]. Materials for mechancial engineering, 2009, 33(4): 43~45
上官宝,张永振,邢建东,孙乐民,邱明,牛永平. 铜-10%石墨合金的载流摩擦磨损性能[J]. 机械工程材料, 2009, 33(4): 43~45
被引情况:
【1】丁涛,王鑫,陈光雄,杨红娟,朱旻昊, "不同弹簧刚度下不锈钢/浸金属碳摩擦副的受流质量与磨损性能的关系",机械工程材料 35, 33-35(2011)
【2】李杨绪,朱德贵,彭 旭,周加敏, "20%C/Cu复合材料的载流摩擦磨损性能",机械工程材料 40, 81-87(2016)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】HE D H,MANORY R. A novel electrical contact material with improved self-lubrication for railway current collectors[J].Wear,2001,249:626-636.
【2】KUBO S,KATO K. Effect of arc discharge on wear rate of Cu-impregnated carbon strip in unlubricated sliding against Cu trolley under electric current[J].Wear,1998,216:172-178.
【3】NAGASAWA H,KATO K. Wear mechanism of copper alloy wire sliding against iron-base strip under electric current[J].Wear,1998,216:179-183.
【4】TU J P,QI W X,YANG Y Z. Effect of aging treatment on the electrical sliding wear behavior of Cu-Cr-Zr alloy[J].Wear,2002,249:1021-1027.
【5】JIA S G,LIU P. Wear behavior of Cu-Ag-Cr alloy wire under electrical sliding[J].Materials Science and Engineering A,2005,398:262-267.
【6】浩宏奇,丁华东,李雅文.工艺因素对铜石墨烧结材料性能的影响[J].西安交通大学学报,1997,31(3):120-122.
【7】陈军,姚萍屏,盛洪超.碳对铜基粉末冶金摩擦材料性能的影响[J].热加工工艺,2006,35(14):13-16.
【8】陈忠华,郭凤仪,董讷.新型受电弓滑板的设计与实现[J].煤炭科学技术,2005,33(3):30-33.
【9】郭斌,金永平,于斌.粉末冶金受电弓滑板材料的设计及其性能研究[J].机械工程材料,2004,28(3):31-34.
【2】KUBO S,KATO K. Effect of arc discharge on wear rate of Cu-impregnated carbon strip in unlubricated sliding against Cu trolley under electric current[J].Wear,1998,216:172-178.
【3】NAGASAWA H,KATO K. Wear mechanism of copper alloy wire sliding against iron-base strip under electric current[J].Wear,1998,216:179-183.
【4】TU J P,QI W X,YANG Y Z. Effect of aging treatment on the electrical sliding wear behavior of Cu-Cr-Zr alloy[J].Wear,2002,249:1021-1027.
【5】JIA S G,LIU P. Wear behavior of Cu-Ag-Cr alloy wire under electrical sliding[J].Materials Science and Engineering A,2005,398:262-267.
【6】浩宏奇,丁华东,李雅文.工艺因素对铜石墨烧结材料性能的影响[J].西安交通大学学报,1997,31(3):120-122.
【7】陈军,姚萍屏,盛洪超.碳对铜基粉末冶金摩擦材料性能的影响[J].热加工工艺,2006,35(14):13-16.
【8】陈忠华,郭凤仪,董讷.新型受电弓滑板的设计与实现[J].煤炭科学技术,2005,33(3):30-33.
【9】郭斌,金永平,于斌.粉末冶金受电弓滑板材料的设计及其性能研究[J].机械工程材料,2004,28(3):31-34.
相关信息