采用叠层模板电沉积工艺制备金属零件
Metal Parts Manufactured by Laminated Template Electrodeposition
摘 要
采用叠层模板电沉积工艺分别沉积制备了不同形状的铜零件;研究了模板材料、模板形状、电流方式及电流密度等工艺参数对零件表面质量和尺寸精度等的影响.结果表明:采用该工艺可制备各种几何形状的金属铜零件;沉积面几何形状的复杂性引起了电场的非均匀分布并导致了边缘效应的产生,这是沉积表面质量恶化的主要原因;脉冲电流可以比直流电流获得表面质量更好的零件,但沉积效率相对较低.
电沉积
金属零件
铜
laminated template
electrodeposition
metal part
copper
Abstract
Copper parts with different profiles were produced by using laminated template electrodeposition. The effects of template materials,template geometry,current type and current density on the surface quality,dimensional precision of the deposited metal parts were studied. The results show that laminated template electrodeposition could produce copper parts with different shapes. Complexity of the deposition surface geometry resulted in the non-uniform distribution of the electric field and the emergence of edge effect,which was the main reason for the deterioration of deposition surface quality. Metal parts with better surface quality could be gained by using a pulse current than a direct current,but the deposition effect of the former was lower than the latter.
中图分类号 TG249.9
所属栏目 新材料 新工艺
基金项目 南京航空航天大学创新基金项目(Y0605-052)
收稿日期 2008/4/15
修改稿日期 2008/11/18
网络出版日期
作者单位点击查看
备注范晖(1978-),男,江苏徐州人,博士研究生.
引用该论文: FAN Hui,TIAN Zong-jun,HUANG Yin-hui,LIU Zhi-dong,WANG Xin-chun. Metal Parts Manufactured by Laminated Template Electrodeposition[J]. Materials for mechancial engineering, 2009, 33(4): 46～49
范晖,田宗军,黄因慧,刘志东,王新春. 采用叠层模板电沉积工艺制备金属零件[J]. 机械工程材料, 2009, 33(4): 46～49
被引情况:
【1】马胜军,沈理达,田宗军,刘志东,黄因慧,王桂峰, "电流密度对摩擦喷射电沉积制备镍沉积层微观形貌及性能的影响",机械工程材料 36, 17-20(2012)
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】颜永年,张伟.基于离散/堆积成型概念的RPM原理和发展[J].中国机械工程,1994,5(3):64-66.
【2】杨伟东,颜永年,张人佶.基于RP直接制造金属型方法[J].新技术新工艺,2002(12):29-31.
【3】靳晓曙,杨洗陈.金属零件的直接快速制造和再制造[J].机械设计与制造,2006(6):96-98.
【4】LI Ling-chun,YANG Jun-bing,RICHARD V,et al. Multicomponent micropatterns or carbon nanotubes[J].Synthetic Metals,2005,154(1/3):225-228.
【5】KOVTYUKHOVA N I,MARTIN B R,MBINDYO J K N,et al. Layer-by-layer self-assembly strategy for template synthesis of nanoscale devices[J].Materials Science and Engineering C,2002,19:255-262.
【6】KONISHI Y,MOTOYAMA M,MATSUSHIMA H,et al. Electrodeposition of Cu nanowire arrays with a template[J].Journal of Electroanalytical Chemistry,2003(15):149-153.
【7】安茂忠.电镀理论与技术[M].哈尔滨:哈尔滨工业大学出版社,2004.
【8】赵阳培,黄因慧,刘志东,等.基于快速成型技术的射流电铸试验研究[J].机械科学与技术,2004,23(12):1447-1449.
【2】杨伟东,颜永年,张人佶.基于RP直接制造金属型方法[J].新技术新工艺,2002(12):29-31.
【3】靳晓曙,杨洗陈.金属零件的直接快速制造和再制造[J].机械设计与制造,2006(6):96-98.
【4】LI Ling-chun,YANG Jun-bing,RICHARD V,et al. Multicomponent micropatterns or carbon nanotubes[J].Synthetic Metals,2005,154(1/3):225-228.
【5】KOVTYUKHOVA N I,MARTIN B R,MBINDYO J K N,et al. Layer-by-layer self-assembly strategy for template synthesis of nanoscale devices[J].Materials Science and Engineering C,2002,19:255-262.
【6】KONISHI Y,MOTOYAMA M,MATSUSHIMA H,et al. Electrodeposition of Cu nanowire arrays with a template[J].Journal of Electroanalytical Chemistry,2003(15):149-153.
【7】安茂忠.电镀理论与技术[M].哈尔滨:哈尔滨工业大学出版社,2004.
【8】赵阳培,黄因慧,刘志东,等.基于快速成型技术的射流电铸试验研究[J].机械科学与技术,2004,23(12):1447-1449.
相关信息
