Application and Properties of Slab Sizing Press Module with Surfacing Welding
摘 要
采用表面堆焊的方法提高侧压机模块的使用寿命,对侧压机模块堆焊层的力学性能、高温硬度和抗高温氧化性能进行了测试,对堆焊层的显微组织进行了分析,并对侧压机模块进行了现场使用试验.结果表明:表面堆焊提高了侧压机模块的塑性、高温硬度和抗高温氧化能力;堆焊层的显微组织是回火索氏体+少许铁素体;堆焊侧压机模块的使用寿命较国产模块有明显延长,并且可以取代进口模块,降低生产成本.
Abstract
Surfacing welding was used to improve the lifetime of the module in the slab sizing press.The mechanical properties,high temperature hardness,anti-oxidation performance and microstructure of the surfacing welding layer were investigated.The results show that the mechanical properties,high temperature hardness and anti-oxidation performance at high temperature of the module were improved by surfacing welding.In the surfacing welding layer,tempered sorbite and ferrites had been observed.The application results illuminated that using surfacing welding,the lifetime of the experimental module was superior to that of the domestic module without surfacing welding,and it could replace the imported one with lower cost.
中图分类号 TG455
所属栏目 材料性能及其应用
基金项目
收稿日期 2008/5/6
修改稿日期 2008/12/24
网络出版日期
作者单位点击查看
备注王光寰(1984-),男,陕西宝鸡人,硕士研究生.
引用该论文: WANG Guang-huan,LIN Tao,JIANG Guang-biao,LI Xiao-bing. Application and Properties of Slab Sizing Press Module with Surfacing Welding[J]. Materials for mechancial engineering, 2009, 33(5): 59~61
王光寰,林涛,江光彪,李小兵. 表面堆焊制备侧压机模块的性能及应用[J]. 机械工程材料, 2009, 33(5): 59~61
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】刘政军,李永奎,陈宏,等.铁基高温耐磨堆焊焊条的设计[J].沈阳工业大学学报,2004,26(4):382-384.
【2】高灵清.论船体钢的高温回火组织[J].理化检验-物理分册,2002,38(12):553-555.
【3】鲍进.1Cr13马氏体不锈钢热处理工艺探讨[J].特钢技术,2006,6(2):20-22.
【4】王红涛.热强马氏体不锈钢1Cr12Ni3Mo2VA钢最佳热处理工艺的优化研究[J].材料工程,1994(4):14-17.
【5】周世锋,王昱成,李向阳,等.ZG0Cr13Ni5Mo马氏体不锈钢模拟焊接HAZ组织与性能[J].焊接学报,2005,25(4):63-66.
【2】高灵清.论船体钢的高温回火组织[J].理化检验-物理分册,2002,38(12):553-555.
【3】鲍进.1Cr13马氏体不锈钢热处理工艺探讨[J].特钢技术,2006,6(2):20-22.
【4】王红涛.热强马氏体不锈钢1Cr12Ni3Mo2VA钢最佳热处理工艺的优化研究[J].材料工程,1994(4):14-17.
【5】周世锋,王昱成,李向阳,等.ZG0Cr13Ni5Mo马氏体不锈钢模拟焊接HAZ组织与性能[J].焊接学报,2005,25(4):63-66.
相关信息