SiC含量和热压烧结温度对AlN-SiC复相陶瓷材料导热性能的影响
Effect of SiC Content and Hot Press Sintering Temperature on Thermal Conductivity Property of AlN-SiC Composites
摘 要
采用热压烧结工艺制备了AlN-SiC复相陶瓷材料,用XRD、SEM和激光导热仪等研究了SiC加入量和烧结温度对复相陶瓷材料导热性能的影响.结果表明:当质量分数在20%~75%范围内,随着SiC含量的增加,复相陶瓷材料的热导率逐渐增大,最大热导率达到了88.92 W·m-1·K-1;进一步增加SiC的含量,复相材料的热导率又呈现下降趋势,当SiC质量分数为80%时,热导率降到了42.70 W·m-1·K-1;当SiC质量分数为20%时,随着烧结温度的升高(1800~1950℃),复相陶瓷材料的热导率逐渐上升,从42.15 W·m-1·K-1增加到68.41 W·m-1·K-1.
碳化硅
导热性能
热压烧结
AlN
SiC
thermal conductivity
hot press sintering
Abstract
AlN-SiC composites were prepared by hot press sintering.The effect of SiC content and sintering temperature on the thermal conductivity property of the composites were investigated by means of XRD,SEM and laser thermal conductivity apparatus.The results show that when the SiC content was in the range of 20%-75%,the thermal conductivity increased gradually with the increase of SiC content and the maximal thermal conductivity reached 88.92 W·m-1·K-1.When the SiC content continued increase,the thermal conductivity of the composite decreased.When the SiC content was 80%,the thermal conductivity decreased to 42.70 W·m-1·K-1.When the SiC content was 20%,the thermal conductivity increased from 42.15 W·m-1·K-1 to 68.41 W·m-1·K-1 gradually with the increase of sintering temperature (1 800-1 950 ℃).
中图分类号 TF124.5
所属栏目 材料性能及其应用
基金项目 江苏省高校自然科学研究计划资助项目(04KJB430040)
收稿日期 2008/5/23
修改稿日期 2008/11/7
网络出版日期
作者单位点击查看
备注程卫华(1981-),男,江苏东台人,硕士研究生.
引用该论文: CHENG Wei-hua,LI Xiao-yun,QIU Tai,JIA Miao-lei,GAO Yu-han. Effect of SiC Content and Hot Press Sintering Temperature on Thermal Conductivity Property of AlN-SiC Composites[J]. Materials for mechancial engineering, 2009, 33(6): 69～71
程卫华,李晓云,丘泰,贾杪蕾,郜玉含. SiC含量和热压烧结温度对AlN-SiC复相陶瓷材料导热性能的影响[J]. 机械工程材料, 2009, 33(6): 69～71
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张长瑞,郝元恺.陶瓷基复合材料——原理、工艺、性能和设计[M].北京:国防科技大学出版社,2001:10.
【2】HUANG J L,JIH J M.Investigation of SiC-AlN:Part II,Mechanical Properties[J].Journal of the American Ceramic Society,1996,79(5):1262-1264.
【3】KIM Y W,MAMORU M,TOSHIYUKI N.High-temperature strength of liquid-phase-sintered SiC with AlN and RE2O3 (RE=Y,Yb)[J].Journal of the American Ceramic Society,2002,85(4):1007-1009.
【4】DILETTA S,STEFANO G,CESARE M,et al.High-temperature resistant composites in the AlN-SiC-MoSi2 system[J].Journal of the American Ceramic Society,2003,86(10):1720-1726.
【5】高陇桥.大功率真空电子器件实用的高热导率陶瓷的进展[J].真空电子技术,1998,5(2):27-28.
【6】TANGEN I L,YU Ying-da,GRANDE T.Preparation and characterisation of aluminium nitride -silicon carbide composites[J].Ceramics International,2004,30(6):931-938.
【7】郑永挺,郝晓东,曲伟,等.Y2O3对氮化铝陶瓷燃烧合成致密化及其组织性能的影响[J].哈尔滨工业大学学报,2002,34(4):483-485.
【2】HUANG J L,JIH J M.Investigation of SiC-AlN:Part II,Mechanical Properties[J].Journal of the American Ceramic Society,1996,79(5):1262-1264.
【3】KIM Y W,MAMORU M,TOSHIYUKI N.High-temperature strength of liquid-phase-sintered SiC with AlN and RE2O3 (RE=Y,Yb)[J].Journal of the American Ceramic Society,2002,85(4):1007-1009.
【4】DILETTA S,STEFANO G,CESARE M,et al.High-temperature resistant composites in the AlN-SiC-MoSi2 system[J].Journal of the American Ceramic Society,2003,86(10):1720-1726.
【5】高陇桥.大功率真空电子器件实用的高热导率陶瓷的进展[J].真空电子技术,1998,5(2):27-28.
【6】TANGEN I L,YU Ying-da,GRANDE T.Preparation and characterisation of aluminium nitride -silicon carbide composites[J].Ceramics International,2004,30(6):931-938.
【7】郑永挺,郝晓东,曲伟,等.Y2O3对氮化铝陶瓷燃烧合成致密化及其组织性能的影响[J].哈尔滨工业大学学报,2002,34(4):483-485.
相关信息
