Tribological Properties of Carbon Nanotubes/Pb-Sn Alloy Composite Coatings
摘 要
在镀液中加入不同含量的碳纳米管,用复合电沉积工艺制备了碳纳米管/铅锡合金复合镀层,测试了其在不同载荷下的摩擦因数和磨损量,并对其磨损形貌和磨损机理进行了分析.结果表明:在相同条件下,碳纳米管/铅锡合金复合镀层的摩擦因数和磨损量均低于普通铅锡合金镀层的;当镀液中的碳纳米管含量为2 g·L-1时,复合镀层的摩擦因数和磨损量最小;复合镀层的磨损机理为磨粒磨损,而不含碳纳米管的铅锡合金镀层的为粘着磨损.
Abstract
Carbon nanotubes(CNTs)/Pb-Sn alloy composite coatings were fabricated by electrodepositing in the plating solutions with different CNTs contents.Friction coefficient and weight loss of the composite coatings were measured under different loads.The worn morphology and wear mechanism were analyzed.The results indicate that the CNTs/Pb-Sn alloy composite coatings had smaller friction coefficient and weight loss than these of ordinary Pb-Sn alloy coating under the same condition.The coating had the smallest friction coefficient and weight loss as the concentration of CNTs was 2 g·L-1.The wear mechanism of the composite coating was abrasive wear,and the wear mechanism of the Pb-Sn alloy coating without CNTs was adhesive wear.
中图分类号 TG115.5
所属栏目 纳米材料
基金项目 国家自然科学基金资助项目(50775041);广东省自然科学基金资助项目(05001804);广东省科技计划资助项目(2008B010400029)
收稿日期 2009/6/23
修改稿日期 2010/2/1
网络出版日期
作者单位点击查看
备注胡正西(1976-),男,湖南永州人,博士研究生.
引用该论文: HU Zheng-xi,JIE Xiao-hua,CHEN Yu-ming,LU Guo-hui. Tribological Properties of Carbon Nanotubes/Pb-Sn Alloy Composite Coatings[J]. Materials for mechancial engineering, 2010, 34(7): 84~87
胡正西,揭晓华,陈玉明,卢国辉. 碳纳米管/铅锡合金复合镀层的摩擦磨损性能[J]. 机械工程材料, 2010, 34(7): 84~87
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】贺林,朱均.短碳纤维增强锡基巴氏合金摩擦学特性[J].中国有色金属学报,1998,8(2):225-228.
【2】TREATY M M J,EBBES T W,GIBSON J M,et al.Exceptionally high young′s modulus observed for individual carbon nanotubes[J].Nature,1996,381:678-680.
【3】ZHANG Hai-yan,YU Ding,WU Chun-yan,et al.The effect of laser power on the formation of carbon nanotubes prepared in CO2 continuous wave laser ablation at room temperature[J].Physica B:Condensed Matter,2003,325:224-229.
【4】AN Bai-gang,LI Li-xiang,LI Hong-xi.Electrodeposition in the Ni-plating bath containing multi-walled carbon nanotubes[J].Materials Chemistry and Physics,2008,110:481-485.
【5】SUSUMU A,AKIHIRO F,MASAMI M,et al.Excellent solid lubrication of electrodeposited nickel-multiwalled carbon nanotube composite films[J].Mat Let,2008,62:3545-3548.
【6】CHEN X H,CHEN C S,XIAO H N,et al.Dry friction and wear characteristics of nickel/carbon nanotube electroless composite deposits[J].Tribol Int,2006,39:22-28.
【7】韩贵,陈卫祥,夏军宝,等.化学镀耐磨自润滑Ni-P复合镀层的摩擦磨损性能[J].摩擦学学报,2004,24(3):216-218.
【8】陈卫祥,甘海洋,涂江平,等.Ni-P-纳米碳管化学复合镀层的摩擦磨损特性[J].摩擦学学报,2002,22(4):241-244.
【9】姜金龙,戴剑锋,袁晓明,等.纳米碳管/铝基复合材料的摩擦磨损性能研究[J].摩擦学学报,2007,27(3):119-222.
【10】涂江平,邹同征,王浪云,等.镍基纳米碳管复合镀层的摩擦磨损性能[J].浙江大学学报,2004,38(7):931-934.
【11】孙莉,钟明强,徐斌碳.纳米管增强聚合物复合材料力学性能及摩擦磨损性能研究进展[J].化工新型材料,2004,34(4)17-19.
【12】孙建林.材料成型摩擦与润滑[M].北京:国防工业出版社,2007.
【13】SAVASKAN T,PURCEK G,MURPHY S.Sliding wear of cast zinc-based alloy bearing under static and dynamic loading conditions[J].Wear,2002,252:693-703.
【2】TREATY M M J,EBBES T W,GIBSON J M,et al.Exceptionally high young′s modulus observed for individual carbon nanotubes[J].Nature,1996,381:678-680.
【3】ZHANG Hai-yan,YU Ding,WU Chun-yan,et al.The effect of laser power on the formation of carbon nanotubes prepared in CO2 continuous wave laser ablation at room temperature[J].Physica B:Condensed Matter,2003,325:224-229.
【4】AN Bai-gang,LI Li-xiang,LI Hong-xi.Electrodeposition in the Ni-plating bath containing multi-walled carbon nanotubes[J].Materials Chemistry and Physics,2008,110:481-485.
【5】SUSUMU A,AKIHIRO F,MASAMI M,et al.Excellent solid lubrication of electrodeposited nickel-multiwalled carbon nanotube composite films[J].Mat Let,2008,62:3545-3548.
【6】CHEN X H,CHEN C S,XIAO H N,et al.Dry friction and wear characteristics of nickel/carbon nanotube electroless composite deposits[J].Tribol Int,2006,39:22-28.
【7】韩贵,陈卫祥,夏军宝,等.化学镀耐磨自润滑Ni-P复合镀层的摩擦磨损性能[J].摩擦学学报,2004,24(3):216-218.
【8】陈卫祥,甘海洋,涂江平,等.Ni-P-纳米碳管化学复合镀层的摩擦磨损特性[J].摩擦学学报,2002,22(4):241-244.
【9】姜金龙,戴剑锋,袁晓明,等.纳米碳管/铝基复合材料的摩擦磨损性能研究[J].摩擦学学报,2007,27(3):119-222.
【10】涂江平,邹同征,王浪云,等.镍基纳米碳管复合镀层的摩擦磨损性能[J].浙江大学学报,2004,38(7):931-934.
【11】孙莉,钟明强,徐斌碳.纳米管增强聚合物复合材料力学性能及摩擦磨损性能研究进展[J].化工新型材料,2004,34(4)17-19.
【12】孙建林.材料成型摩擦与润滑[M].北京:国防工业出版社,2007.
【13】SAVASKAN T,PURCEK G,MURPHY S.Sliding wear of cast zinc-based alloy bearing under static and dynamic loading conditions[J].Wear,2002,252:693-703.
相关信息