搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
阳极氧化法制备高度有序TiO2纳米管阵列材料的研究进展
          
Recent Progress of Highly Ordered TiO2 Nanotube Array Materials Prepared by Anodic Oxidation Method

摘    要
综述了阳极氧化法制备TiO2纳米管阵列(TNTs)的研究进展。主要介绍了TNTs由恒电压合成到变电压阳极氧化制备的发展历程, 还介绍了电压、电流、电解液组成等因素对TNTs形貌的影响, 并比较了不同电解液中TNTs的形成机理。
标    签 TiO2纳米管   阳极氧化   变电压   合成机理   TiO2 nanotube   anodic oxidation method   alternating voltage   formation mechanism  
 
Abstract
The recent progresses on TiO2 nanotubes arrays (TNTs) prepared by anodic oxidation progress are reviewed. The evolution of TNTs anodic oxidation preparation from constant voltage to alternating voltage is introduced. The effects of some factors such as voltage, current, electrolyte composition on morphology of TNTs are also introduced. The formation mechanisms of TNTs prepared in various electrolytes are compared.

中图分类号 O614.3   DOI 10.11973/jxgccl201509001

 
  购买该论文  中国光学期刊网论文下载说明


所属栏目 综述

基金项目 上海市自然科学基金资助项目(14ZR1429300)

收稿日期 2014/7/3

修改稿日期 2015/7/17

网络出版日期

作者单位点击查看

备注张丽娜(1988-), 女, 河北沧州人, 硕士研究生。

引用该论文: ZHANG Li-na,JI Ya-jun,WU Da-hui,JIA Yan-chen,ZHOU Shi-lin. Recent Progress of Highly Ordered TiO2 Nanotube Array Materials Prepared by Anodic Oxidation Method[J]. Materials for mechancial engineering, 2015, 39(9): 1~5
张丽娜,计亚军,吴大辉,贾延臣,周仕林. 阳极氧化法制备高度有序TiO2纳米管阵列材料的研究进展[J]. 机械工程材料, 2015, 39(9): 1~5


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】薛寒松, 李华基, 易于, 等. 铈掺杂二氧化钛纳米管的光催化性能[J]. 机械工程材料, 2008, 32(6): 36-40.
 
【2】WEIR A, WESTERHOFF P, FABRICIUS L, et al. Titanium dioxide nanoparticles in food and personal care products[J]. Environmental Science & Technology, 2012, 46(4): 2242-2250.
 
【3】TEKIN D, SAYGI B. Photoelectrocatalytic decomposition of acid black 1 dye using TiO2 nanotubes[J]. Journal of Environmental Chemical Engineering, 2013, 1(4): 1057-1061.
 
【4】李晓红, 张校刚, 力虎林. TiO2纳米管的模板法制备及表征[J]. 高等学校化学学报, 2001, 22(1): 130-132.
 
【5】李纲, 刘中清, 张昭, 等. 水热法制备TiO2纳米管阵列[J]. 催化学报, 2009, 30(1): 37-42.
 
【6】朱伟庆, 王树林, 高乾. 阳极氧化法制备有序TiO2纳米管阵列[J]. 上海理工大学学报, 2010, 32(3): 256-258.
 
【7】田甜, 王凡, 袁永健, 等. TiO2 纳米管阵列阳极氧化制备的研究进展[J]. 材料导报, 2013(7): 11-15.
 
【8】LI Yin-chang, MA Qun, HAN Jun, et al.Controllable preparation, growth mechanism and the properties research of TiO2 nanotube arrays[J]. Applied Surface Science, 2014, 297: 103-108.
 
【9】KIM D, GHICOV A, ALBU S P, et al. Bamboo-type TiO2 nanotubes: improved conversion efficiency in dye-sensitized solar cells[J]. Journal of the American Chemical Society, 2008, 130(49): 16454-16455.
 
【10】LUAN Xin-ning, GUAN Dong-sheng, WANG Ying. Facile synthesis and morphology control of bamboo-type TiO2 nanotube arrays for high-efficiency dye-sensitized solar cells[J]. The Journal of Physical Chemistry: C, 2012, 116(27): 14257-14263.
 
【11】ALBU S P, GHICOV A, ALDABERGENOVA S, et al. Formation of double-walled TiO2 nanotubes and robust anatase membranes[J]. Advanced Materials, 2008, 20(21): 4135-4139.
 
【12】JI Ya-jun, LIN Keng-chu, ZHENG He-gen, et al. Fabrication of double-walled TiO2 nanotubes with bamboo morphology via one-step alternating voltage anodization[J]. Electrochemistry Communications, 2011, 13(9): 1013-1015.
 
【13】JI Ya-jun, ZHANG Ming-dao, CUI Jie-hu, et al. Highly-ordered TiO2 nanotube arrays with double-walled and bamboo-type structures in dye-sensitized solar cells[J]. Nano Energy, 2012, 1(6): 796-804.
 
【14】LIN J, LIU K, CHEN X. Synthesis of periodically structured titania nanotube films and their potential for photonic applications[J]. Small, 2011, 7(13): 1784-1789.
 
【15】XIE Yu-long, LI Zi-xia, XU Hua, et al. Fabrication of TiO2 nanotubes with extended periodical morphology by alternating-current anodization[J]. Electrochemistry Communications, 2012, 17: 34-37.
 
【16】GUI Qun-fang, YU Dong-liang, ZHANG Shao-yu, et al. Influence of anodizing voltage mode on the nanostructure of TiO2 nanotubes[J]. Journal of Solid State Electrochemistry, 2014, 18(1): 141-148.
 
【17】GONG D, GRIMES C A, VARGHESE O K, et al. Titanium oxide nanotube arrays prepared by anodic oxidation[J]. Journal of Materials Research, 2001, 16(12): 3331-3334.
 
【18】MOR G K, VARGHESE O K, PAULOSE M, et al. Fabrication of tapered, conical-shaped titania nanotubes[J]. Journal of Materials Research, 2003, 18(11): 2588-2593.
 
【19】MACAK J M, SIROTNA K, SCHMUKI P. Self-organized porous titanium oxide prepared in Na2SO4/NaF electrolytes[J]. Electrochimica Acta, 2005, 50(18): 3679-3684.
 
【20】JAROENWORALUCK A, REGONINI D, BOWEN C R, et al. Macro, micro and nanostructure of TiO2 anodised films prepared in a fluorine-containing electrolyte[J]. Journal of Materials Science, 2007, 42(16): 6729-6734.
 
【21】REGONINI D, BOWEN C R, JAROENWORALUCK A, et al. A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes[J]. Materials Science and Engineering: R: Reports, 2013, 74(12): 377-406.
 
【22】SHANKAR K, MOR G K, PRAKASAM H E, et al. Highly-ordered TiO2 nanotube arrays up to 220 μm in length: use in water photoelectrolysis and dye-sensitized solar cells[J/OL]. Nanotechnology, 2007, 18(6): 065707[2014-07-03].http://iopscience.iop.org/0957-4484/18/6/065707.DOI:10.1088/0957-4484/18/6/065707.
 
【23】PAULOSE M, PRAKASAM H E, VARGHESE O K, et al. TiO2 nanotube arrays of 1000 μm length by anodization of titanium foil: phenol red diffusion[J]. The Journal of Physical Chemistry: C, 2007, 111(41): 14992-14997.
 
【24】BERGER S, KUNZE J, SCHMUKI P, et al. A lithographic approach to determine volume expansion factors during anodization: using the example of initiation and growth of TiO2 nanotubes[J]. Electrochimica Acta, 2009, 54(24): 5942-5948.
 
【25】MACA K J M, TSUCHIYA H, GHICOV A, et al. Dye-sensitized anodic TiO2 nanotubes[J]. Electrochemistry Communications, 2005, 7(11): 1133-1137.
 
【26】PAULOSE M, SHANKAR K, VARGHESE O K, et al. Backside illuminated dye-sensitized solar cells based on titania nanotube array electrodes[J]. Nanotechnology, 2006, 17(5): 1446-1448.
 
【27】LEI Bing-xin, LUO Qiu-ping, SUN Zhen-fan, et al. Fabrication of partially crystalline TiO2 nanotube arrays using 1, 2-propanediol electrolytes and application in dye-sensitized solar cells[J]. Advanced Powder Technology, 2013, 24(1): 175-182.
 
【28】PAULOSE M, SHANKAR K, YORIYA S, et al. Anodic growth of highly ordered TiO2 nanotube arrays to 134 μm in length[J]. The Journal of Physical Chemistry: B, 2006, 110(33): 16179-16184.
 
【29】FAHIM N F, SEKINO T. A novel method for synthesis of titania nanotube powders using rapid breakdown anodization[J]. Chemistry of Materials, 2009, 21(9): 1967-1979.
 
【30】WEI W, KIRCHGEORG R, LEE K, et al. Nitrates: a new class of electrolytes for the rapid anodic growth of self-ordered oxide nanopore layers on Ti and Ta[J]. Physica Status Solidi (RRL)-Rapid Research Letters, 2011, 5(10/11): 394-396.
 
【31】WENDER H, FEIL A F, DIAZ L B, et al. Self-organized TiO2 nanotube arrays: Synthesis by anodization in an ionic liquid and assessment of photocatalytic properties[J]. ACS Applied Materials & Interfaces, 2011, 3(4): 1359-1365.
 
【32】SO S, LEE K, SCHMUKI P. Ultrafast growth of highly ordered anodic TiO2 nanotubes in lactic acid electrolytes[J]. Journal of the American Chemical Society, 2012, 134(28): 11316-11318.
 
【33】SREEKANTAN S, WEI L C, LOCKMAN Z. Extremely fast growth rate of TiO2 nanotube arrays in electrochemical bath containing H2O2[J]. Journal of the Electrochemical Society, 2011, 158(12): C397-C402.
 
【34】WANG Yan, WU Yu-cheng, QIN Yong-qiang, et al. Rapid anodic oxidation of highly ordered TiO2 nanotube arrays[J]. Journal of Alloys and Compounds, 2011, 509(14): L157-L160.
 
【35】KOJIMA R, KIMURA Y, NIWANO M. Influence of the electrolyte composition on formation process and morphology of anodic titanium oxide nanotubes[C]//ECS Meeting Abstracts.[S.l]:The Electrochemical Society, 2013 (2): 109-109.
 
【36】SANCHEZ-TOVAR R, LEE K, GARCA-ANTN J, et al. Formation of anodic TiO2 nanotube or nanosponge morphology determined by the electrolyte hydrodynamic conditions[J]. Electrochemistry Communications, 2013, 26: 1-4.
 
相关信息
   标题 相关频次
 Eu(dbm)3phen/SiO2@KH570-NH2核壳结构微球的制备及其性能表征
 6
 白光LED用红色荧光粉的最新研究进展
 6
 静电纺丝制备铁(Ⅱ)/聚丙烯腈复合纳米纤维及其应用于吸附铬(Ⅵ)
 6
 3-(4′-氯基苯基)-5-(2′-羧基偶氮)若丹宁催化动力学荧光光度法测定痕量锰
 2
 氨基酸-乙酰丙酮分光光度法测定水样中甲醛
 2
 氨水挥发法制备氮掺杂TiO2纳米管及表征
 2
 铂基非酶葡萄糖传感器的研究进展
 2
 弛豫时间对X100管线钢组织和力学性能的影响
 2
 固体超强酸NiO-ZrO2/SO42-的合成及其对葡萄糖电催化氧化的研究
 2
 金属离子为探针分光光度法测定半胱氨酸
 2
 裂解-气相色谱法同时测定卷烟烟丝中3种芳香烃的释放量
 2
 生物传感器在环境监测中的应用
 2
 温度对2CrMo转子钢低周疲劳性能的影响
 2
 稀土元素测定方法的研究进展
 2
 氧化铝模板法制备掺杂稀土镧的TiO2纳米管及其表征
 2
 乙二醇电解液阳极氧化法制备TiO2纳米管
 2
 周仕林
 2
 09CuPCrNi耐候钢干湿交替加速腐蚀的锈层结构与形成机理
 1
 30 μm高比表面积TiO2纳米管的制备工艺
 1
 40Cr钢磨削淬火层组织及其形成机理
 1
 6063铝合金阳极氧化过程中麻点问题分析
 1
 9S75铝合金的电化学腐蚀行为及阳极氧化工艺
 1
 AZ31镁合金的阳极氧化新工艺
 1
 TiO2纳米管阵列薄膜的水热晶化
 1
 TP347H耐热钢管在超临界条件下的氧化膜结构及形成机理
 1
 不同膜胞尺寸铝多孔氧化膜的制备
 1
 大电流密度下活塞顶面的阳极氧化
 1
 点焊试样X射线底片白斑影像产生机理分析
 1
 电化学法研究铝阳极氧化膜的抗腐蚀性
 1
 电化学抛光和阳极氧化处理后TC4钛合金表面的生物活性
 1