Application of Second Development based on ANSYS Software on Simulation of Detection Defect in Curved Pipes Using Ultrasonic Guided Waves
摘 要
为提高利用ANSYS进行弯管缺陷超声导波数值模拟的分析效率,简化操作程序,在ANSYS平台上,利用其固有的参数化设计语言APDL 进行二次开发,编制了一套参数化弯管缺陷导波检测模块。利用此套模块可以方便快捷地进行基于ANSYS的弯管缺陷导波检测的数值模拟。整个过程完全实现了参数化建模、加载和后处理,从而减少了前后处理时间,提高了分析效率,并通过试验证明了此套模块的有效性。
Abstract
For improving the analysis efficiency of simulation of detection defect in curved pipes using ultrasonic guided waves based on ANSYS software, a set of modules are designed with ANSYS parameter design language(APDL). The detection defect in curved pipes using guided waves can be simulated with the modules. Modeling, loading, and post-analysis can be performed by inputing concerned parameters, so the analysis efficiency can be greatly improved. The modules are verified by the consistency of the results between experiments and simulations.
中图分类号 TG115.28
所属栏目 科研成果与学术交流
基金项目 北京市教委资助项目(KZ200510005004,KM200410005003);国家自然科学基金项目(10372009);北京市自然科学基金项目(4052008)
收稿日期 2005/11/10
修改稿日期
网络出版日期
作者单位点击查看
备注王秀彦(1966~),女,副教授,博士,主要从事试验固体力学、超声无损检测新技术及传感器测试技术等方面的研究。
引用该论文: WANG Xiu-yan,SUN Ya-xin,LIU Zeng-hua,WU Bin,HE Cun-fu,LI Long-tao. Application of Second Development based on ANSYS Software on Simulation of Detection Defect in Curved Pipes Using Ultrasonic Guided Waves[J]. Nondestructive Testing, 2006, 28(8): 413~415
王秀彦,孙雅欣,刘增华,吴 斌,何存富,李隆涛. ANSYS二次开发技术在弯管缺陷超声导波检测数值模拟中的应用[J]. 无损检测, 2006, 28(8): 413~415
被引情况:
【1】吴斌,周伟,郑阳,何存富, "基于波结构的Lamb波单一模态激励仿真",无损检测 33, 1-4(2011)
【2】吴 斌,张 青,孙雅欣,何存富,王秀彦, "一种基于导波技术检测锚杆长度及缺陷的新方法",无损检测 29, 237-240(2007)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】焦敬品,何存富,吴 斌,等.管道超声导波检测技术研究进展\[J\].实验力学,2002,17(1):1-9.
【2】何存富,于海群,吴 斌.管道超声导波检测专用探头的研制\[J\].实验力学,2003,18(4):500-505.
【3】Demma A, Cawley P, Lowe MJS. Mode conbersion of longitudinal and torsional guided modes due to pipe bends\[J\]. Review of Progress in Quantitative Nondestructive Evaluation, Edited by Thompson DO, Chimenti DE,2001,20:172-179.
【4】Aristégui C, Lowe MJS, Cawley P. Reflection and mode conversion of guided waves at bends in pipes[J]. Review of Progress in Quantitative NDE,2000,19:209-216.
【5】博嘉科技公司.有限元分析软件——ANSYS融会与贯通\[M\].北京:中国水利水电出版社,2002.369-370.
【6】王秀彦,王 智,焦敬品,等.超声导波在管中传播的理论分析与试验研究\[J\].机械工程学报,2004,40(1):11-16.
【7】何存富,李隆涛,吴 斌.超声导波在管道中的数值模拟\[J\].北京工业大学学报,2004,30(2):129-133.
【8】吴 斌,郑璟瑜,何存富,等.采用PZT传感器激励和接收超声导波\[J\].北京工业大学学报,2003,29(1):1-4.
【2】何存富,于海群,吴 斌.管道超声导波检测专用探头的研制\[J\].实验力学,2003,18(4):500-505.
【3】Demma A, Cawley P, Lowe MJS. Mode conbersion of longitudinal and torsional guided modes due to pipe bends\[J\]. Review of Progress in Quantitative Nondestructive Evaluation, Edited by Thompson DO, Chimenti DE,2001,20:172-179.
【4】Aristégui C, Lowe MJS, Cawley P. Reflection and mode conversion of guided waves at bends in pipes[J]. Review of Progress in Quantitative NDE,2000,19:209-216.
【5】博嘉科技公司.有限元分析软件——ANSYS融会与贯通\[M\].北京:中国水利水电出版社,2002.369-370.
【6】王秀彦,王 智,焦敬品,等.超声导波在管中传播的理论分析与试验研究\[J\].机械工程学报,2004,40(1):11-16.
【7】何存富,李隆涛,吴 斌.超声导波在管道中的数值模拟\[J\].北京工业大学学报,2004,30(2):129-133.
【8】吴 斌,郑璟瑜,何存富,等.采用PZT传感器激励和接收超声导波\[J\].北京工业大学学报,2003,29(1):1-4.
相关信息