Overview of Computer Simulation of Radiographic Testing
摘 要
分析了射线检测仿真的原理,对一些射线检测仿真软件系统进行了介绍。将射线检测仿真技术分为两个层次,介绍了仿真技术的进展及在射线检测中应用,并对未来的发展趋势进行了展望。
Abstract
The principle of computer simulation of radiographic testing is analyzed, and some software systems are listed. The development of simulation is classified as two stages and each of them is described separately. In the end, the trend of simulation of radiographic testing is predicted.
中图分类号 TG115.28 TP391.9
所属栏目 综 述
基金项目
收稿日期 2005/6/28
修改稿日期
网络出版日期
作者单位点击查看
备注孙朝明(1977~),男,工程师,硕士,主要研究无损检测中的信号分析与图像处理技术应用。
引用该论文: SUN Chao-ming,WANG Zeng-yong. Overview of Computer Simulation of Radiographic Testing[J]. Nondestructive Testing, 2006, 28(9): 475~477
孙朝明,王增勇. 射线检测中的仿真技术发展[J]. 无损检测, 2006, 28(9): 475~477
被引情况:
【1】王倩妮,马海全,苏宇航, "射线检测计算机仿真技术及其应用",无损检测 37, 13-17(2015)
【2】李宁,李娜,王战军,刘旭升,张松军,王平, "射线检测建模及仿真",无损检测 31, 634-638(2009)
【3】孙朝明,李 强,王增勇,李建文, "CMOS探测器在射线检测中的应用",无损检测 30, 226-228(2008)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张俊哲,游开兴,马振译,等.无损检测技术及其应用\[M\].北京:科学出版社,1993.
【2】屠耀元,郑世才,李 衍.射线检测技术\[M\].上海:世界图书出版社,1997.
【3】Nicolas Freud, Philippe Duvaucheue, Daniel Babot, et al. Simulation of X-ray NDT imaging techniques\[A\]. 15th World Conference on Non-Destructive Testing\[C\]. Rome:2000.
【4】汪 鹏.面向装配体的ICT计算机仿真及相关技术研究\[D\].西安:西北工业大学,2003.
【5】Mathy F, Guillemaud R, Picone M, et al. Experimental validation of a couple photon Monte Carlo and CAD software\[J\]. Nuclear Instruments and Methods in Physics Research,2003,504A:317-320.
【6】Bonin A, Chalmond B, Lavayssiere B, et al. Monte-Carlo simulation of industrial radiography images and experimental designs\[J\]. NDT&E International,2002,35:503-510.
【7】Bonin A, Lavayssiere B. New advances in the development of MODERATO\[A\]. 15th World Conference on Non-Destructive Testing\[C\]. Rome:2000.
【8】Tillack GR, Nockemann C, Bellon C, et al. X-ray modeling for industrial applications\[J\]. NDT&E International,2000,33:481-488.
【9】Inanc F, Gray J. New developments in the computer simulation of X-ray nondestructive evaluation process\[J\]. Review of Progress in Quantitative Nondestructive Evaluation,1991,10A:355-361.
【10】Tillack GR, Bellon C, Nockemann C, et al. Computer simulation of radiographic process——a study of complex component and defect geometry\[J\]. Review of Progress in Quantitative Nondestructive Evaluation,1995,14:665-672.
【11】Carsten Bellon, Tillack GR, Nockemann C, et al. Computer simulation of X-ray NDE process coupled with CAD interface\[J\]. Review of Progress in Quantitative Nondestructive Evaluation,1997,16:325-330.
【12】Koenig A, Gliere A, Rizo P, et al. Object pose estimation using a set of local radiographs of a part and its CAD model\[J\]. Review of Progress in Quantitative Nondestructive Evaluation,1997,16:829-836.
【2】屠耀元,郑世才,李 衍.射线检测技术\[M\].上海:世界图书出版社,1997.
【3】Nicolas Freud, Philippe Duvaucheue, Daniel Babot, et al. Simulation of X-ray NDT imaging techniques\[A\]. 15th World Conference on Non-Destructive Testing\[C\]. Rome:2000.
【4】汪 鹏.面向装配体的ICT计算机仿真及相关技术研究\[D\].西安:西北工业大学,2003.
【5】Mathy F, Guillemaud R, Picone M, et al. Experimental validation of a couple photon Monte Carlo and CAD software\[J\]. Nuclear Instruments and Methods in Physics Research,2003,504A:317-320.
【6】Bonin A, Chalmond B, Lavayssiere B, et al. Monte-Carlo simulation of industrial radiography images and experimental designs\[J\]. NDT&E International,2002,35:503-510.
【7】Bonin A, Lavayssiere B. New advances in the development of MODERATO\[A\]. 15th World Conference on Non-Destructive Testing\[C\]. Rome:2000.
【8】Tillack GR, Nockemann C, Bellon C, et al. X-ray modeling for industrial applications\[J\]. NDT&E International,2000,33:481-488.
【9】Inanc F, Gray J. New developments in the computer simulation of X-ray nondestructive evaluation process\[J\]. Review of Progress in Quantitative Nondestructive Evaluation,1991,10A:355-361.
【10】Tillack GR, Bellon C, Nockemann C, et al. Computer simulation of radiographic process——a study of complex component and defect geometry\[J\]. Review of Progress in Quantitative Nondestructive Evaluation,1995,14:665-672.
【11】Carsten Bellon, Tillack GR, Nockemann C, et al. Computer simulation of X-ray NDE process coupled with CAD interface\[J\]. Review of Progress in Quantitative Nondestructive Evaluation,1997,16:325-330.
【12】Koenig A, Gliere A, Rizo P, et al. Object pose estimation using a set of local radiographs of a part and its CAD model\[J\]. Review of Progress in Quantitative Nondestructive Evaluation,1997,16:829-836.
相关信息