Measurement of Strain Based on Electronic Shearing Speckle Pattern Interferometry
摘 要
介绍了基于电子错位散斑理论的应变检测技术,并采用统计光学的方法对散斑现象进行了分析,与传统光学的分析方法相比,该方法可以对电子散斑干涉行为有更深入的理解。最后提出应变检测所需要的主要数学计算方法。
Abstract
A review of strain measurement based on electronic shearing speckle pattern interferometry(ESSPI) was presented. Some concepts on speckle pattern were addressed on the basis of speckle statistic optics, which was superior to traditional optics in understanding speckle interfering behavior. Finally, strain measurement formula was derived.
中图分类号 TG115.28
所属栏目 科研成果与学术交流
基金项目
收稿日期 2005/11/23
修改稿日期
网络出版日期
作者单位点击查看
备注刘战捷(1961-),男,研究员级高工,主要从事无损检测工作。
引用该论文: LIU Zhan-jie. Measurement of Strain Based on Electronic Shearing Speckle Pattern Interferometry[J]. Nondestructive Testing, 2007, 29(3): 121~124
刘战捷. 基于电子错位散斑理论的应变检测技术[J]. 无损检测, 2007, 29(3): 121~124
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】徐宏文.应力分析[M].北京:科学出版社,1962.
【2】王 峰,曹光宇.简明实验力学[M].北京:科学出版社,1993.
【3】严承蔼.光弹性贴片技术及工程应用[M].北京:国防工业出版社,2003.
【4】黄 毅,李守新.一种新的压力容器红外应力评价技术[C].热弹性红外图像安全检测技术论文集.北京:[出版者不详],2002:3-11.
【5】丹蒂 J C.激光斑纹及其有关现象[M].北京:科学出版社,1981.
【6】刘培森.散斑统计光学基础[M].北京:科学出版社,1987.
【7】秦玉文.电子错位散斑研究[J].力学学报,1990,22(6):725-731.
【8】Hung Y Y. Shearography: a new optical method for strain measurement and nondestructive testing[J]. Optical Engineering,1982,21(3):391-395.
【9】张 嘉.三维电子散斑法在检测残余应力中的应用[J].实验应力,2000,15(2):125-130.
【10】Wu S Y, Qin Y W. Determination of residual stresses using large shearing speckle interferometry and the hole drilling method[J]. Optics and Lasers in Engineering,1995(23):233-244.
【2】王 峰,曹光宇.简明实验力学[M].北京:科学出版社,1993.
【3】严承蔼.光弹性贴片技术及工程应用[M].北京:国防工业出版社,2003.
【4】黄 毅,李守新.一种新的压力容器红外应力评价技术[C].热弹性红外图像安全检测技术论文集.北京:[出版者不详],2002:3-11.
【5】丹蒂 J C.激光斑纹及其有关现象[M].北京:科学出版社,1981.
【6】刘培森.散斑统计光学基础[M].北京:科学出版社,1987.
【7】秦玉文.电子错位散斑研究[J].力学学报,1990,22(6):725-731.
【8】Hung Y Y. Shearography: a new optical method for strain measurement and nondestructive testing[J]. Optical Engineering,1982,21(3):391-395.
【9】张 嘉.三维电子散斑法在检测残余应力中的应用[J].实验应力,2000,15(2):125-130.
【10】Wu S Y, Qin Y W. Determination of residual stresses using large shearing speckle interferometry and the hole drilling method[J]. Optics and Lasers in Engineering,1995(23):233-244.
相关信息