国外TOFD检测标准分析和比较
Evaluation and Comparison of Foreign TOFD Standards
摘 要
概述了超声波衍射时差法(TOFD)，对目前世界上主要的七个TOFD检测标准或规范进行了分析和比较，归纳了其中十二个方面的异同点。为我国TOFD检测标准的制订和TOFD技术的发展提供参考。
检测标准
分析比较
检测范围
人员资格认证
检测仪器
Time of flight diffraction
Inspection standard
Analysis and comparison
Testing scope
Personnel qualification and certification
Testing equipment
Abstract
Time of flight diffraction(TOFD) was summarized as a new nondestructive testing method. The present seven main TOFD standards in the world were evaluated and compared in twelve different portions. It may be helpful for establishing the chinese TOFD standard and accelerating the development of TOFD technique in our country.
中图分类号 TG115.28
所属栏目 TOFD方法专题论坛
基金项目
收稿日期 2006/12/6
修改稿日期
网络出版日期
作者单位点击查看
备注郑 晖(1974-)，男，高级工程师，北京航空航天大学在读博士研究生。主要从事特种设备检验检测工作。
引用该论文: ZHENG Hui,HU Bin,LIN Shu-qing,MA Dian-zhong. Evaluation and Comparison of Foreign TOFD Standards[J]. Nondestructive Testing, 2007, 29(3): 150～154
郑 晖,胡 斌,林树青,马殿忠. 国外TOFD检测标准分析和比较[J]. 无损检测, 2007, 29(3): 150～154
被引情况:
【1】卢超,邬冠华,任吉林,陆铭慧, "无损检测专业实践教学体系建设的探索——南昌航空大学“测控技术与仪器”国家特色专业建设",无损检测 33, 59-64(2011)
【2】关卫和,阎长周,张保中,齐 杰,陈建玉兰州兰石机械制造有限责任公司, 兰州 730050,谷 杰, "我国压力容器行业TOFD检测技术的应用和进展",无损检测 32, 961-965(2010)
【3】马学荣,陈晓辉,路君, "TOFD技术在火箭推进剂储罐全面检验中的应用",无损检测 37, 10-12(2015)
【4】惠维山,钟 华,穆晓忠, "超声衍射时差法用于核电站常规岛管道焊缝检测的可行性",无损检测 38, 37-39(2016)
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Silk M G. Sizing crack like defects by ultrasonic means. Research Techniques in Non-destructive Testing［M］. London: Academic Press,1977.
【2】BS 7706—1993 Guide to Calibration and Setting-up of the Ultrasonic Time of Flight Diffraction (TOFD) Technique for Defect Detection［S］.
【3】ENV 583-6:2000 Non-destructive Testing Ultrasonic Examination Part 6: Time-of-Flight Diffraction Technique as a Method for Defect Detection and Sizing［S］.
【4】CEN/TS-14751:2004 Welding Use of Time-of-flight Diffraction Technique (TOFD) for Examination of Welds［S］.
【5】NEN 1822 Acceptance Criteria for the Time of Flight Diffraction Inspection Technique［S］.
【6】ASME code case 2235-9 Use of Ultrasonic Examination in Lieu of Radiography Section Ⅰ and Section Ⅷ, Divisions 1 and 2［S］.
【7】ASTM E2373—2004 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique［S］.
【8】NDIS 2423—2001 TOFD法によるきず高さ測定方法［S］.
【2】BS 7706—1993 Guide to Calibration and Setting-up of the Ultrasonic Time of Flight Diffraction (TOFD) Technique for Defect Detection［S］.
【3】ENV 583-6:2000 Non-destructive Testing Ultrasonic Examination Part 6: Time-of-Flight Diffraction Technique as a Method for Defect Detection and Sizing［S］.
【4】CEN/TS-14751:2004 Welding Use of Time-of-flight Diffraction Technique (TOFD) for Examination of Welds［S］.
【5】NEN 1822 Acceptance Criteria for the Time of Flight Diffraction Inspection Technique［S］.
【6】ASME code case 2235-9 Use of Ultrasonic Examination in Lieu of Radiography Section Ⅰ and Section Ⅷ, Divisions 1 and 2［S］.
【7】ASTM E2373—2004 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique［S］.
【8】NDIS 2423—2001 TOFD法によるきず高さ測定方法［S］.
相关信息
