An Interface Extraction Algorithm for Foamed Dreg Image
摘 要
提出一种基于数字图像处理技术的溶渣泡沫高度检测方法。该方法由CCD摄像头将采集到的溶渣泡沫影像经图像采集卡转换成数字图像,然后由计算机经图像处理后得到溶渣泡沫的轮廓线,并由轮廓线背景的刻度线直接得出溶渣泡沫各处的实际高度。实验结果表明,该检测原理可行,对实现溶渣泡沫高度的在线检测具有指导意义。
Abstract
A digital image processing technique based on measuring method of foamed dreg edge was described. The video signals of foamed dreg obtained by CCD camera were converted into digital image signal by an image acquisition card. The contour line of foamed dreg was obtained by image processing of computer, the actual height of foamed dreg was observed by the graduation line of contour line background. The experiment evinced that the method was feasible on principle and have directive meaning for realization of on-line measurement of foam height on site.
中图分类号 TG115.28
所属栏目 科研成果与学术交流
基金项目
收稿日期 2006/4/17
修改稿日期
网络出版日期
作者单位点击查看
备注苑玮琦(1960-),男,博士,教授,研究方向为图像处理与模式识别。
引用该论文: YUAN Wei-qi,DENG Shu-xian. An Interface Extraction Algorithm for Foamed Dreg Image[J]. Nondestructive Testing, 2007, 29(5): 262~265
苑玮琦,邓淑贤. 基于数字图像处理技术的溶渣泡沫高度检测方法[J]. 无损检测, 2007, 29(5): 262~265
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】苑玮琦,曲彦平,王建军,等.高炉泡沫渣高度在线检测方法研究[J].钢铁,1997,32(11):13-15.
【2】John Canny. A computational approach to edge detection[J]. IEEE Trans,1986,RAMI-8:679-6984.
【3】顾元华.医用诊断X线机设备与维修[M].上海:上海科学技术出版社,1982.8.
【4】阳 波.基于最大类间方差遗传算法的图像分割方法[J].湖南师范大学自然科学学报,2003,26(1):32-37.
【5】邢书珍,邢天奇.非线性最小二乘拟合的计算方法[J].中国铁道科学,1995,16(3):64-71.
【2】John Canny. A computational approach to edge detection[J]. IEEE Trans,1986,RAMI-8:679-6984.
【3】顾元华.医用诊断X线机设备与维修[M].上海:上海科学技术出版社,1982.8.
【4】阳 波.基于最大类间方差遗传算法的图像分割方法[J].湖南师范大学自然科学学报,2003,26(1):32-37.
【5】邢书珍,邢天奇.非线性最小二乘拟合的计算方法[J].中国铁道科学,1995,16(3):64-71.
相关信息