搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
高分子复合材料粘弹性的超声波评价
          
Evaluation of Polymer Composite Viscoelasticity by Ultrasonic Propagation Character

摘    要
基于复数弹性理论,分别用直接接触法和水延迟透射法阐述了EPDM5Si乙丙橡胶高分子复合材料的超声波衰减系数和相速度的求解方法,并利用衰减系数和相速度相关,求解材料的储藏弹性率和损失弹性率的比值损失正切tanδ。最后用动态力学分析(DMA)方法对求得的tanδ值进行了验证,结果非常吻合。建立了适于高分子复合材料动态粘弹性的超声无损评价系统。
标    签 橡胶材料   超声波   动态力学分析   衰减系数   Rubber material   Ultrasonic wave   Dynamic mechanical analysis   Attenuation coefficient  
 
Abstract
According to complex number elastic theories, the solution of attenuation coefficient and phase velocity of EPDM5Si polymer composite materials were expatiated with two kinds of methods (direct contact method and waters delay method). The tangent value of the loss angle, i.e. the ratio of the store energy modules and the loss energy modules was deduced. The result of the tangent value of the loss angle was validated by dynamic mechanical analysis (DMA) method, and proved to be exactitude. An evaluation system for polymer composite material by UT was established.

中图分类号 TB553 TG115.28

 
  中国光学期刊网论文下载说明


所属栏目 综 述

基金项目

收稿日期 2006/11/1

修改稿日期

网络出版日期

作者单位点击查看

备注常俊杰(1964-),女,博士,从事无损检测研究工作。

引用该论文: CHANG Jun-jie. Evaluation of Polymer Composite Viscoelasticity by Ultrasonic Propagation Character[J]. Nondestructive Testing, 2007, 29(9): 546~548
常俊杰. 高分子复合材料粘弹性的超声波评价[J]. 无损检测, 2007, 29(9): 546~548


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】Chang Junjie, Zheng C, Ni Q. The ultrasonic wave propagation in composite material and its characteristic evaluation[J]. Composite Structures,2006,75:451.
 
【2】Ping He. Acoustic dispersion and attenuation measurement using both transmitted and reflected pulses[J]. IEEE Transactions on Ultrasonics,1999,46(3):58.
 
相关信息
   标题 相关频次
 利用超声波传播特性对Al2O3涂层进行评价
 4
 TC4钛合金计算机射线检测的衰减系数和灵敏度测定及散射
 2
 X射线检测光纤缠绕缺陷及衰减系数分析
 2
 超声波对AZ31B镁合金凝固组织和力学性能的影响
 2
 超声波技术在Fe3O4磁粒子制备中的应用
 2
 超声波首波波幅差异与声时测量值的关系
 2
 超声波首波波幅对混凝土强度测值的影响
 2
 大洋富钴结壳的超声测厚
 2
 复合材料孔隙率的超声检测衰减系数影响因素
 2
 钢轨探伤车对钢轨焊缝缺陷的检测能力
 2
 固溶温度对GH4169微观组织形貌及超声特性的影响
 2
 管道衰减系数对超声导波检测距离的影响
 2
 国内外超声检测标准关于对比试块声学性能规定的比较
 2
 哈氏合金C-276与16Mn异种合金对接焊缝射线检测
 2
 合成孔径算法在混凝土检测中的应用
 2
 横纵波法测量螺栓轴向应力的温度修正
 2
 基于超声法测量空气声速的声时计量校验
 2
 空气耦合超声波的位移测量
 2
 宽带高灵敏度柔性相控阵探头的发展与应用
 2
 利用胶片特性曲线及辐射理论推算阀门厚度
 2
 氢蚀430不锈钢中超声表面波的传播特性
 2
 受火后混凝土表面损伤超声波检测算法
 2
 细长工件轴向超声检测中迟到波的形成机制及特性
 2
 叶片深根裂纹的原位超声波检测
 2
 中等厚度铅合金铸件的超声波检测
 2
 CNG储气井超声波自动检测系统初探
 1
 De Hua Materials Testing Co.,Ltd.
 1
 SONIX-HS1000型超声显微镜的影像识别系统改进
 1
 北京明长城原青砖的超声波测强
 1
 残余应力的超声检测方法
 1