Development of LabVIEW Based Eddy Current Testing System
摘 要
针对传统涡流检测仪器硬件复杂、成本较高的缺点, 采用虚拟仪器技术, 研制了一套基于LabVIEW的涡流无损检测系统。系统由涡流检测硬件电路、上位计算机、数据采集卡以及相关软件组成。重点介绍了硬件电路中的激励源、自动平衡电路和相敏检波模块的设计。系统完成后, 对圆管管壁通孔和钢条裂纹进行了检测试验。检测结果表明系统具备良好的检测性能。
Abstract
Directing against the disadvantage of the complicated hardware and high cost of traditional eddy current testing instrument, a LabVIEW based eddy current testing system was developed. The system was composed of hardware circuit, computer, data acquisition card and relative software. The design of the carrier frequency generator, auto-balance circuit and the phase-sensitive detector was introduced in detail. Testing experiments were done using the system, and the results showed that the system had good testing capability.
中图分类号 TG115.28
所属栏目 科研成果与学术交流
基金项目
收稿日期 2007/3/15
修改稿日期
网络出版日期
作者单位点击查看
备注李运飞(1982-), 男, 硕士研究生, 主要从事电磁无损检测的研究和设备的开发。
引用该论文: LI Yun-Fei,CHEN Yi-Fang. Development of LabVIEW Based Eddy Current Testing System[J]. Nondestructive Testing, 2009, 31(2): 96~98
李运飞,陈以方. 基于LabVIEW的涡流检测系统研制[J]. 无损检测, 2009, 31(2): 96~98
被引情况:
【1】袁群哲,曹旭,韩云东,蒋永馨, "陀螺导航设备非接触检测系统设计",无损检测 34, 55-59(2012)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李 铁, 刘时风, 李路明.基于LabVIEW的虚拟仪器技术在无损检测中的应用[J].无损检测,2001,23(6):240-242.
【2】美国无损检测学会.美国无损检测手册(电磁卷)[M].上海: 世界图书出版公司,1999.
【3】李家伟, 陈积懋.无损检测手册[M].北京: 机械工业出版社,2002.
【2】美国无损检测学会.美国无损检测手册(电磁卷)[M].上海: 世界图书出版公司,1999.
【3】李家伟, 陈积懋.无损检测手册[M].北京: 机械工业出版社,2002.
相关信息