Design of Tube Weld Inspection System with Automatic Real-Time Digital Radioscopy
摘 要
比较和分析了各种小径管对接焊缝X射线实时成像技术, 开发出一种性价比极高的自动X射线实时数字成像检测方法和设备。实际应用的结果表明, 系统具有检测速度快、灵敏度和分辨率高的特点, 成像质量优于JB 4730—2005标准中规定的AB级。
Abstract
The automatic real-time X-ray imaging inspecting method and equipment with a certain high cost-effective performance have been developed on the basis of comparing and analyzing the available technologies of X-ray real-time imaging for tube butt weld. The practical application of production shows that the system contains the characteristic of high speed inspecting and high sensitivity and resolution, whose image quality is above the JB 4730—2005 AB claim.
中图分类号 TG115.28
所属栏目 仪器方法
基金项目
收稿日期 2008/2/21
修改稿日期
网络出版日期
作者单位点击查看
备注孙忠诚(1963-), 男, 副教授, 硕士。长期从事射线数字影像技术研究和设备开发。
引用该论文: SUN Zhong-Cheng,WU Gen-Hua,JIN Shu-Yong,SUN Mao-Lin. Design of Tube Weld Inspection System with Automatic Real-Time Digital Radioscopy[J]. Nondestructive Testing, 2009, 31(2): 138~143
孙忠诚,吴根华,靳树永,孙茂林. 小径管自动X射线实时数字成像检测系统设计[J]. 无损检测, 2009, 31(2): 138~143
被引情况:
【1】丁无极,汪宏,熊伟东,朱宇龙,屠林杨, "管道环焊缝射线检测数字成像的畸变规律",无损检测 38, 38-40(2016)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】宋协伟, 张勇为, 曲英华.X射线实时成像系统在锅炉压力容器管材探伤中的应用[J].锅炉制造,2004,(1):80-82.
【2】JB/T 4730.2—2005 承压设备无损检测 第2部分: 射线检测[S].
【3】GB/T 19293—2003 对接焊缝X射线实时成像检测法[S].
【4】EN 13608—2001 Non-destructive testing[S].
【5】ASME Boiler & Pressure Vessel Code(2001Edition,2002,2003 Addenda)Section Ⅴ, Article 2 Mandatory Appendix Ⅱ-Real-time radioscopic examination[S].
【2】JB/T 4730.2—2005 承压设备无损检测 第2部分: 射线检测[S].
【3】GB/T 19293—2003 对接焊缝X射线实时成像检测法[S].
【4】EN 13608—2001 Non-destructive testing[S].
【5】ASME Boiler & Pressure Vessel Code(2001Edition,2002,2003 Addenda)Section Ⅴ, Article 2 Mandatory Appendix Ⅱ-Real-time radioscopic examination[S].
相关信息