爬波在无损检测中的应用
Application of Creeping Wave in Nondestructive Testing
摘 要
由于爬波受工件表面粗糙的影响不大, 同时具有对表面和近表面缺陷非常敏感的优点, 使爬波检测成为常规超声波检测的有力补充。综合目前国内外的研究进展, 列举了爬波在支柱瓷绝缘子、焊缝和螺栓裂纹等检测方面的应用, 所有实例均表明爬波检测在这些方面的有效性。随着爬波理论研究的深入和检测仪器的发展, 爬波在无损检测领域的应用必将越来越广泛。
支柱瓷绝缘子
奥氏体不锈钢
角焊缝
螺栓
Creeping wave
Strut porcelain insulator
Austenitic stainless steel
Fillet welt
Bolt
Abstract
Due to being less influenced by surface roughness and being sensitive to surface and sub-surface defects, creeping wave testing has become an effective supplement to conventional ultrasonic testing. The application of creeping wave in the testing fields of strut porcelain insulator, welding and bolt was introduced, on the basis of current research progress at home and abroad. Its effectiveness in these fields was proved by all the testing cases. With the further research and experiment for the creeping wave theory and testing instrument development, creeping wave testing shall be applied more and more popularly in nondestructive testing.
中图分类号 TG115.28
所属栏目 综述
基金项目
收稿日期 2008/5/5
修改稿日期
网络出版日期
作者单位点击查看
备注王春水(1978-), 男, 工程师, 硕士, 主要从事无损检测工作。
引用该论文: WANG Chun-Shui,HU Xian-Long,ZHANG Jun-Yi,JI Chang-Guo. Application of Creeping Wave in Nondestructive Testing[J]. Nondestructive Testing, 2009, 31(3): 223～224
王春水,胡先龙,张俊义,季昌国. 爬波在无损检测中的应用[J]. 无损检测, 2009, 31(3): 223～224
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】姚忠森,吴光亚.高压支柱瓷绝缘子运行事故分析[J].高电压技术,2002,28(10): 57-58.
【2】Handbook on the Ultrasonic Examination of Austenitic Welds ⅡW.1987.
【3】晏荣明,张 璐,徐 巍,等.超声爬波无损检测方法的研究[J].南昌航空工业学院学报,1994,(1): 33-37.
【4】马德举,张 博.角焊缝及其热影响区近表面裂纹检测[A].全国第六届电站构件失效分析与寿命管理学术会议报告[C].西安: 中国电机工程学会,2000: 125-131.
【5】Sony B, Balasubramanian T, Pardikar R J. Ultrasonic study for detection of inner diameter cracking in pipeline girth welds using creeping waves[J]. International Journal of Pressure Vessels and Piping,2003,80(2): 139-146.
【6】张 泉,孟传亨.用超声爬波探伤法检查螺栓裂纹[J].湖北电力技术监督,1995,7(2): 25-28.
【7】Erhard Anton, Wuestenberg Hermann, Schulz Eduard, et al. Left bracket applications of longitudinal creeping waves in nondestructive testing with ultrasound and experience in the use of creeping wave probes right bracket[J]. Materialpruefung,1982,24(2): 43-48.
【8】廉德良,魏天阳.薄壁管材探伤用爬波探头的设计及应用[J].无损检测,2004,26(7): 352-354.
【2】Handbook on the Ultrasonic Examination of Austenitic Welds ⅡW.1987.
【3】晏荣明,张 璐,徐 巍,等.超声爬波无损检测方法的研究[J].南昌航空工业学院学报,1994,(1): 33-37.
【4】马德举,张 博.角焊缝及其热影响区近表面裂纹检测[A].全国第六届电站构件失效分析与寿命管理学术会议报告[C].西安: 中国电机工程学会,2000: 125-131.
【5】Sony B, Balasubramanian T, Pardikar R J. Ultrasonic study for detection of inner diameter cracking in pipeline girth welds using creeping waves[J]. International Journal of Pressure Vessels and Piping,2003,80(2): 139-146.
【6】张 泉,孟传亨.用超声爬波探伤法检查螺栓裂纹[J].湖北电力技术监督,1995,7(2): 25-28.
【7】Erhard Anton, Wuestenberg Hermann, Schulz Eduard, et al. Left bracket applications of longitudinal creeping waves in nondestructive testing with ultrasound and experience in the use of creeping wave probes right bracket[J]. Materialpruefung,1982,24(2): 43-48.
【8】廉德良,魏天阳.薄壁管材探伤用爬波探头的设计及应用[J].无损检测,2004,26(7): 352-354.
相关信息
