Pulse Eddy Current Detection Simulation of the Pipe Corrosion with Insulation Layer
摘 要
脉冲涡流检测技术是近几年发展起来的一种新型无损检测技术, 可以应用于金属管道和金属板的内腐蚀检测。以低碳无缝钢管的内壁腐蚀作为检测对象, 建立了针对脉冲涡流检测的ANSYS有限元仿真模型, 分析了磁场仿真的理论基础, 列出了仿真分析的具体步骤。为ANSYS有限元仿真软件在脉冲涡流检测中的应用提供了参考, 为脉冲涡流检测设备的研制提供了依据。
Abstract
Pulsed eddy current (PEC) testing is a new type of nondestructive measurement technology developed in recent years, mainly used in the detection of metal pipes and metal plates containing some inner corrosion. An inner corrosion of low-carbon seamless steel pipe was as a detection target, ANSYS finite element simulation model for pulsed eddy current detection was built up, the theoretical basis of the magnetic field simulation was analyzed, and the specific steps of the simulation was set up. These have provided some reference for the application of ANSYS finite element simulation software in the pulsed eddy current detection, and some bases for the research of pulsed eddy current testing equipment.
中图分类号 TG115.28
所属栏目 科研成果与学术交流
基金项目 “十一五”国家科技支撑计划资助项目(2006BAK02B02)
收稿日期 2008/10/31
修改稿日期
网络出版日期
作者单位点击查看
备注辛伟(1982-), 男, 硕士研究生, 研究方向为电磁无损检测技术。
引用该论文: XIN Wei,DING Ke-Qin,HUANG Dong-Lin,LIANG Li-Hong. Pulse Eddy Current Detection Simulation of the Pipe Corrosion with Insulation Layer[J]. Nondestructive Testing, 2009, 31(7): 509~512
辛伟,丁克勤,黄冬林,梁丽红. 带保温层管道腐蚀缺陷的脉冲涡流检测技术仿真[J]. 无损检测, 2009, 31(7): 509~512
被引情况:
【1】许华文,廖俊必,殷国富, "场指纹法管道腐蚀监测系统小腐蚀坑的高精度识别方法",腐蚀与防护 34, 330-334(2013)
【2】杜金强,施越红,何宇廷, "裂纹长度和提离距离对涡流阵列传感器输出特性的影响",无损检测 37, 36-39(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】游凤荷.涡流检测技术的某些新进展[J].无损检测, 2001, 38(2): 4-6.
【2】Ali Sopgian, Gui Yun Tian, David Taylor, et al. A feature extraction technique based on principal component analysis for pulsed eddy current NDT[J]. NDT& E International, 2003, 36(1): 37-41.
【3】Dai X W, Ludwig R, Palanisamy R. Numerical simulation of pulsed eddy-current nondestructive testing phenomena[J]. IEEE Transactions on Magnetics, 1990, 26(6): 3089-3096.
【4】孙明礼, 胡仁喜.ANSYS10.0电磁学有限元分析实例指导教程[M].北京: 机械工业出版社, 2007.
【5】金建铭(美).电磁场有限元方法[M].西安: 西安电子科技大学出版社, 1998.
【6】张榴晨, 徐松.有限元法在电磁计算中的应用[M].北京: 中国铁道出版社, 1996.
【7】阎照文.ANSYS10.0工程电磁分析技术与实例详解[M].北京: 中国水利水电出版社, 2006.
【8】单成祥, 牛彦文.传感器设计基础[M].北京: 国防工业出版社, 2007.
【9】Safizadeh M S, Lepine B A, Forsyth D S, et al. Time frequency analysis of pulsed eddy current signals[J]. Journal of Nondestructure Evaluation, 2001, 20(2): 73-86.
【2】Ali Sopgian, Gui Yun Tian, David Taylor, et al. A feature extraction technique based on principal component analysis for pulsed eddy current NDT[J]. NDT& E International, 2003, 36(1): 37-41.
【3】Dai X W, Ludwig R, Palanisamy R. Numerical simulation of pulsed eddy-current nondestructive testing phenomena[J]. IEEE Transactions on Magnetics, 1990, 26(6): 3089-3096.
【4】孙明礼, 胡仁喜.ANSYS10.0电磁学有限元分析实例指导教程[M].北京: 机械工业出版社, 2007.
【5】金建铭(美).电磁场有限元方法[M].西安: 西安电子科技大学出版社, 1998.
【6】张榴晨, 徐松.有限元法在电磁计算中的应用[M].北京: 中国铁道出版社, 1996.
【7】阎照文.ANSYS10.0工程电磁分析技术与实例详解[M].北京: 中国水利水电出版社, 2006.
【8】单成祥, 牛彦文.传感器设计基础[M].北京: 国防工业出版社, 2007.
【9】Safizadeh M S, Lepine B A, Forsyth D S, et al. Time frequency analysis of pulsed eddy current signals[J]. Journal of Nondestructure Evaluation, 2001, 20(2): 73-86.
相关信息