Study on the Method of Graphite Density Uniformity Inspection Based on X-Ray ICT
摘 要
针对工程中石墨密度检测的难点,提出一种基于CT的石墨密度均匀性检测方法。该方法通过石墨投影数据的重建,对CT切片进行圆区域的平均灰度值统计,求出各切片层的相对密度,并以3σ标准对其评判。实验表明,该方法可以有效地求出石墨制品内部密度的均匀程度,并对其制品密度的疏松或密集处作出准确判断。
Abstract
The difficulties of graphite density examination technology were introluced. A graphite density uniformity inspection method based on X-Ray industry computed tomography(ICT) was proposeed. It carried on the average gray level statistics in the round region to the ICT slices and extracted the relative density of the various slices level through data reconstruction of graphite projection, and then evaluated them by 3σ standard. The experiment indicated that it could effectively extract the uniformity level of graphite product interior density and get the accurate judgment of the loose and dense place of the product density.
中图分类号 TP391 TH145.1+3
所属栏目 科研成果与学术交流
基金项目 国家自然基金资助项目(60602041);山西省自然基金资助项目(2006021018)
收稿日期 2007/6/1
修改稿日期
网络出版日期
作者单位点击查看
备注李俊杰(1982-),男,硕士研究生,主要从事信息识别与无损检测、数字图像处理方面的研究。
引用该论文: LI Jun-Jie,HAN Yan,WANG Li-Ming. Study on the Method of Graphite Density Uniformity Inspection Based on X-Ray ICT[J]. Nondestructive Testing, 2008, 30(3): 163~164
李俊杰,韩 焱,王黎明. 基于ICT的石墨密度均匀性检测方法研究[J]. 无损检测, 2008, 30(3): 163~164
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Blanco C, Bermejo J, Marsh H. Chemical and physical properties of carbon as related to brake performance[J]. Wear,1997,213(1):1-12.
【2】Saleh Wael, Qaddoumi Nasser, A bu-Khousa Mohammed. Preliminary investigation of near-field nondestructive testing of carbon-loaded composites using loaded open-ended waveguides[J]. Composite Structures,2003,62(3):403-407.
【3】先 武,李时光.工业CT的基本原理与性能[J].无损检测,1996,18(2):57-60.
【2】Saleh Wael, Qaddoumi Nasser, A bu-Khousa Mohammed. Preliminary investigation of near-field nondestructive testing of carbon-loaded composites using loaded open-ended waveguides[J]. Composite Structures,2003,62(3):403-407.
【3】先 武,李时光.工业CT的基本原理与性能[J].无损检测,1996,18(2):57-60.
相关信息