In Situ Nondestructive Testing to Integrate Endoscopy and Eddy Current Testing
摘 要
单一的无损检测方法对于复杂的检测对象很难实现原位检测。提出了一种内窥涡流集成化无损检测的新方法,采用虚拟仪器技术设计并实现了该内窥涡流集成化检测系统的硬件和软件。利用该检测系统对某型航空发动机篦齿盘裂纹缺陷进行了原位检测。结果表明,集成化内窥涡流系统完全可以实现复杂金属结构的原位无损检测,具有广阔的应用前景。
Abstract
In situ testing need not to disassemble equipment and structures. So it can save time and prevent from the breakdown and damage resulted from disassembly. In situ testing can be difficult for complicated object using single nondestructive testing method. It is an important approach to integrate several nondestructive testing methods. A new method to integrate endoscopy and eddy current testing was proposed. The hardware and software of the system to integrate endoscopy and eddy current testing was designed and achieved using virtual instrument. The crack of aeroengine labyrinth disc was detected in situ using this system. Testing results show that nondestructive testing to integrate endoscopy and eddy current testing can completely realize crack detection in situ for complicated metallic structures. This makes the method have the broad application foreground.
中图分类号 TG115.28
所属栏目 科研成果与学术交流
基金项目
收稿日期 2007/8/29
修改稿日期
网络出版日期
作者单位点击查看
备注田武刚(1978-),男,博士研究生,研究领域为测试计量技术与仪器,无损检测技术与仪器。
引用该论文: TIAN WuGang,PAN MengChun,LUO FeiLu,SU JianBin. In Situ Nondestructive Testing to Integrate Endoscopy and Eddy Current Testing[J]. Nondestructive Testing, 2008, 30(6): 332~333
田武刚,潘孟春,罗飞路,苏剑彬. 内窥涡流集成化原位无损检测[J]. 无损检测, 2008, 30(6): 332~333
被引情况:
【1】苏剑彬,潘孟春,田武刚, "便携式内窥镜系统CMOS图像传感器驱动设计与实现",无损检测 30, 488-490(2008)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】许占显,李佩春.原位检测技术[J].无损检测,2002,24(5):203-204.
【2】于辉左,洪 福,黄传奇.先进内窥技术与发动机故障检测[J].航空工程与维修,2002,(2):20-22.
【3】《美国无损检测手册》译审委员会,译.美国无损检测手册·电磁卷[M].上海:世界图书出版社,1999.
【4】《国防工业无损检测人员资格鉴定与认证培训教材》编审委员会.涡流检测[M].北京:机械工业出版社,2004.
【5】金 彦,储昭武.基于虚拟仪器平台的压力管道检测技术应用研究[J].化工设备与管道,2005,(5):58-61.
【6】崔福绵,付肃真.某型发动机九级篦齿盘均压孔裂纹及断裂分析[C].全国第五届航空航天装备失效分析会议论文集,2006.
【2】于辉左,洪 福,黄传奇.先进内窥技术与发动机故障检测[J].航空工程与维修,2002,(2):20-22.
【3】《美国无损检测手册》译审委员会,译.美国无损检测手册·电磁卷[M].上海:世界图书出版社,1999.
【4】《国防工业无损检测人员资格鉴定与认证培训教材》编审委员会.涡流检测[M].北京:机械工业出版社,2004.
【5】金 彦,储昭武.基于虚拟仪器平台的压力管道检测技术应用研究[J].化工设备与管道,2005,(5):58-61.
【6】崔福绵,付肃真.某型发动机九级篦齿盘均压孔裂纹及断裂分析[C].全国第五届航空航天装备失效分析会议论文集,2006.
相关信息